ccgt060204 tips

[Douglas JohnstonParticipant @douglasjohnston98463]

Due to a terminal illness I am clearing out a lot of my workshop stuff. Big items will be left to others to dispose of but I thought I would sell off quite a large selection of high quality carbide inserts. I have been using CCGT06 and similar triangular and square inserts of Taegutec brand for quite a while and picked up a good stock a couple of years ago. These inserts are the sharp polished ones that work superbly on the smaller lathe, you just have to be careful not to chip the edges.They are similar to the ones in the Arc Euro catalogue page 43 but a lot cheaper!

These inserts can just be sent by letter post when taken out of the plastic packaging, so if anybody is wanting to try some send me a pm and I will get back to you.

Doug

[Douglas JohnstonParticipant @douglasjohnston98463]

[EmgeeParticipant @emgee]

Hi Doug

Sorry to hear of your illness, good luck with the disposal of those ccgt06 inserts, I also have been using them for a number of years and they do work well in all materials, you haven't said what nose rad the inserts are but all rads are useful.

Emgee

[EmgeeParticipant @emgee]

Reginald Johnson 1

check your message box

Emgee

[Douglas JohnstonParticipant @douglasjohnston98463]

I have had a couple of replies from people but the only response I am getting back is that they have no public profile and no actual message has been received by me. Is the personal messaging service working? The nose radius of the tips is 0.02mm

Doug

[Douglas JohnstonParticipant @douglasjohnston98463]

Seems to be working now so I will see how it goes.

Doug

[bernard towersParticipant @bernardtowers37738]

emgee its in the title, or not

Edited By bernard towers on 29/04/2023 17:17:25

[Author]

Posts