Building a Stuart 10V engine

[Peter Simpson 2Participant @petersimpson2]

Hi, would anybody out there be prepared to photocopy Harold Hall’s series on building  Stuart 10v and 10H engines. I purchased ME vol 205, we then moved house and I never got round to purchasing the following issues. As I’m now at a loose end awaiting the construction of a new workshop I would like to start my first project with one of these models. Many thanks for any assistance received.

[Peter Simpson 2Participant @petersimpson2]

[JasonBModerator @jasonb]

David may have something to say regarding copying but Harold has put all the photos onto his site, as they say a picture is worth a 1000 words

 

http://www.homews.co.uk/page42.html

 

Jason

[Nicholas FarrParticipant @nicholasfarr14254]

Hi, yes I’d say they are still a bit warm for copying, but I should imagine they are still available from MyHobby Store.

 

Regards Nick.

Edited By Nicholas Farr on 04/01/2011 13:37:02

[David Clark 13Participant @davidclark13]

Hi There

Photos are on Harold’s website.

Back issues are available for MuHobbyStore and also the digital edition at £29.95 would cover these engines..

regards David

 

[JasonBModerator @jasonb]

Peter you may also want to take a look on Madmodder there are a couple of recent build threads on the 10 and also the larger number 4.

 

J

[James ParkerParticipant @jamesparker66774]

My attempt at the 10v is online here:

 

http://www.rootprompt.co.uk/category/stuart-10v/

 

This was (and still is, pretty much !) the first ME project I’ve attempted, so excuse any obvious crimes against the engineering gods.  Still very pleased with it. 

 

All the best.

 

James. 

Edited By James Parker on 05/01/2011 20:32:40

[Author]

Posts