Brushless dc mill died!

Brushless dc mill died!

This topic has 1 reply, 1 voice, and was last updated 21 July 2023 at 17:25 by John Rutzen.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
21 July 2023 at 17:25 #653159
John Rutzen
Participant
@johnrutzen76569
My Amadeal 25LV mill, which has worked well for 6 years suddenly stopped today and I wonder if anyone can please help diagnose the problem. It was running ok on a light cut and the earth leakage trip just cut the power. When I reset the trip the display lit up and the contactor went in but there was no number displayed and nothing happened when I turned the speed pot. The display was lit up and I checked the fuse and it is ok. There is no evidence of burning on the control board but it is potted so you can't see much. There are no loose wires, no smoke or smell.
Advert

21 July 2023 at 17:25 #34249
John Rutzen
Participant
@johnrutzen76569
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- How to identify a thread, ACME vs TR
  Started by: moonman in: Beginners questions
- 2
- 2
- 7 February 2025 at 04:25
  Michael Gilligan
- OKMO Microcosm Model M31 Vertical Steam Engine Single Cylinder with DIY Mods
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 7 February 2025 at 01:07
  Blue Heeler
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 10
- 14
- 6 February 2025 at 23:40
  Nigel Graham 2
- What Do These Mean; Why So Many Loop Errors? (Alibre Atom)
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 3
- 6
- 6 February 2025 at 23:05
  Nigel Graham 2
- Parting off – Left over nib
  Started by: Blue Heeler in: Workshop Techniques
- 6
- 8
- 6 February 2025 at 22:54
  Blue Heeler
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 5
- 9
- 6 February 2025 at 22:46
  Nigel Graham 2
- Solid Edge – Spring Designer – Help! 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 7
- 28
- 6 February 2025 at 17:51
  SillyOldDuffer
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 3
- 4
- 6 February 2025 at 17:06
  zymurgy2289
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 6 February 2025 at 16:57
  Andrew Tinsley
- Lidl spray aerosol items 1 2
  Started by: Bootlegger Blacky in: Hints And Tips for model engineers
- 20
- 26
- 6 February 2025 at 16:53
  Mick B1
- Totally unacceptable treatment 1 2
  Started by: Me. in: General Questions
- 14
- 28
- 6 February 2025 at 15:49
  John Hinkley
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 21
- 28
- 6 February 2025 at 13:48
  Tony Pratt 1
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 25
- 6 February 2025 at 13:14
  JasonB
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 10
- 15
- 6 February 2025 at 12:40
  parovoz
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 79
- 6 February 2025 at 11:36
  SillyOldDuffer
- The most difficult project?
  Started by: Tony Martyr in: Stationary engines
- 5
- 15
- 6 February 2025 at 11:25
  Chris Gunn
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 334
- 6 February 2025 at 10:55
  Brian Abbott
- Small butane torch refilling.
  Started by: YouraT in: Workshop Tools and Tooling
- 13
- 19
- 6 February 2025 at 08:21
  Nicholas Farr
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 1
- 1
- 6 February 2025 at 07:17
  David Senior
- CNC mill on its stand
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 2
- 6 February 2025 at 06:54
  JasonB
- shopmade single flute end mill
  Started by: celso ari schlichting in: General Questions
- 4
- 4
- 6 February 2025 at 06:34
  Diogenes
- Pittler spiral cutting test
  Started by: vic newey in: Workshop Techniques
- 9
- 21
- 5 February 2025 at 20:16
  vic newey
- Pennsylvania A3 Switcher 1 2 3
  Started by: Mark Elen 1 in: Work In Progress and completed items
- 18
- 58
- 4 February 2025 at 17:52
  Mark Elen 1
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 6
- 24
- 4 February 2025 at 17:50
  David George 1
- The wonders of AI… 1 2
  Started by: Robin Graham in: The Tea Room
- 15
- 42
- 4 February 2025 at 15:42
  Russell Eberhardt

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies