Bridge port spares

[Tony PerksParticipant @tonyperks94676]

[Tony PerksParticipant @tonyperks94676]

Hi all new to the forum, I have a few machines that i use myself as I supply performance cylinders heads, for 4 stroke prtrol engines, I have a bidgeport vertical turret mill and need some spare parts namely the stol mechanism, for the horizonal feed as mine is missing so the machine will not stop when the feed is selected.

So my question is wher can i get parts from I need the stops the brackets that hold the bar that runs along the bed that trips the stops, and the bar Many thanks in advance Tony P.

[JasonBModerator @jasonb]

Well as no body else has answered as KWIL posted elsewher you can get parts from teh following

 

http://www.shophardinge.com/

 

J

[KWILParticipant @kwil]

Since this appears to be just the bar and trip stops, why not make what you need?

[James BParticipant @jamesb]

Hi Tony,

 

I’ve not tried myself, but I have been told you can source spares from the link below – they offer rebuilt Bridgeports…

 

http://www.braithwaiterebuild.co.uk

 

James

 

[Tony PerksParticipant @tonyperks94676]

thanks hardinge seems to an american firm and I will check out the other later.

[WeldsolParticipant @weldsol]

Hardinge are in the uk that is where I got my spares from

 

Paul

 

Hardinge Machine Tools, Ltd.
Whiteacres
Cambridge Road
Whetstone
Leicester
LE8 6BD England
Tel: +44 (0)116 2869900
Fax: +44 (0)116 2869901
e-mail: sales@hardinge.co.uk
web site: http://www.hardinge.co.uk

[stevef53Participant @stevef53]

Hi Tony,

You probably fixed this already, but if not try The engineers emporium (www.theengineersemporium.co.uk) as they are breaking bridgeports. I got bits from hardinge, but found them expensive.

cheers

Steve

[Author]

Posts