Boxford Duet drill/bore

Boxford Duet drill/bore

This topic has 1 reply, 1 voice, and was last updated 21 July 2013 at 13:55 by MrSlinkyfish.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
21 July 2013 at 13:55 #125178
MrSlinkyfish
Participant
@mrslinkyfish
I recently acquired a boxford duet machine which I intend to use in lathe mode. It didn't come with any software or accessories apart from a lh cutting tool and parting tool. I would like to be able to drill/bore but I don't know how to fit the appropriate tools in the machine.

I sourced suitable boxford software from the Internet and a manual for a more advanced machine. I see that the more advanced machine comes with a 'four position quick change drill holder' I am not sure what this would look like or what I could do to source one.

I would really appreciate any help that you can provide regarding how to hold drill bits in the machine.

Thanks in advance
Advert

21 July 2013 at 13:55 #15017
MrSlinkyfish
Participant
@mrslinkyfish
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What Do These Mean; Why So Many Loop Errors? (Alibre Atom)
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 4
- 10
- 7 February 2025 at 09:54
  David Jupp
- Parting off – Left over nib
  Started by: Blue Heeler in: Workshop Techniques
- 7
- 10
- 7 February 2025 at 09:48
  JasonB
- How to identify a thread, ACME vs TR
  Started by: moonman in: Beginners questions
- 6
- 6
- 7 February 2025 at 09:29
  Adrian R2
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 10
- 15
- 7 February 2025 at 08:36
  Nicholas Farr
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 11
- 16
- 7 February 2025 at 08:27
  james rumble
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 6
- 10
- 7 February 2025 at 07:05
  Diogenes
- OKMO Microcosm Model M31 Vertical Steam Engine Single Cylinder with DIY Mods
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 7 February 2025 at 01:07
  Blue Heeler
- Solid Edge – Spring Designer – Help! 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 7
- 28
- 6 February 2025 at 17:51
  SillyOldDuffer
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 3
- 4
- 6 February 2025 at 17:06
  zymurgy2289
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 6 February 2025 at 16:57
  Andrew Tinsley
- Lidl spray aerosol items 1 2
  Started by: Bootlegger Blacky in: Hints And Tips for model engineers
- 20
- 26
- 6 February 2025 at 16:53
  Mick B1
- Totally unacceptable treatment 1 2
  Started by: Me. in: General Questions
- 14
- 28
- 6 February 2025 at 15:49
  John Hinkley
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 21
- 28
- 6 February 2025 at 13:48
  Tony Pratt 1
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 25
- 6 February 2025 at 13:14
  JasonB
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 79
- 6 February 2025 at 11:36
  SillyOldDuffer
- The most difficult project?
  Started by: Tony Martyr in: Stationary engines
- 5
- 15
- 6 February 2025 at 11:25
  Chris Gunn
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 334
- 6 February 2025 at 10:55
  Brian Abbott
- Small butane torch refilling.
  Started by: YouraT in: Workshop Tools and Tooling
- 13
- 19
- 6 February 2025 at 08:21
  Nicholas Farr
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 1
- 1
- 6 February 2025 at 07:17
  David Senior
- CNC mill on its stand
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 2
- 6 February 2025 at 06:54
  JasonB
- shopmade single flute end mill
  Started by: celso ari schlichting in: General Questions
- 4
- 4
- 6 February 2025 at 06:34
  Diogenes
- Pittler spiral cutting test
  Started by: vic newey in: Workshop Techniques
- 9
- 21
- 5 February 2025 at 20:16
  vic newey
- Pennsylvania A3 Switcher 1 2 3
  Started by: Mark Elen 1 in: Work In Progress and completed items
- 18
- 58
- 4 February 2025 at 17:52
  Mark Elen 1
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 6
- 24
- 4 February 2025 at 17:50
  David George 1
- The wonders of AI… 1 2
  Started by: Robin Graham in: The Tea Room
- 15
- 42
- 4 February 2025 at 15:42
  Russell Eberhardt

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies