Bandsaw folding table

[RobboParticipant @robbo]

Folding table for vertical use of the common horizontal bandsaw

[RobboParticipant @robbo]

A few days ago I saw a posting on a forum thread which showed, or gave a link to, details of a folding table for the common bandsaw, which avoided the usual fiddle of fitting a table for vertical use. It was a permanent fixture and didn't have to be removed when horizontal cutting.

Thought "must come back and have a good look at that", but now I can't find it.

Have searched under the heading "bandsaw" but not found it. Also checked all the latest threads without success.

Can someone help point me in the right direction as it is driving me (further) round the bend – or have I got it completely wrong?

Phil

[Les Jones 1Participant @lesjones1]

Hi Phil,
Is it this design by Mike Cox that you are looking for. I have made one for my bandsaw and it is much better than the original.

Les.

[Gary WoodingParticipant @garywooding25363]

It was in the thread about the Aldi saw. Here is the link that Michael Cox provided to his excellent website.

Gary

Edited By Gary Wooding on 24/09/2014 10:25:37

[RobboParticipant @robbo]

Thanks Les and Gary, that's the very one. Now bookmarked so I don't lose it again. I already have a home-made table for the saw, with a fence, but Mike's looked an improvement, and mine does have to be fixed and removed using the 2 screws in the blade guide every time.

Thanks again,

Phil

[Author]

Posts