90deg center holes for grinding between centers

90deg center holes for grinding between centers

This topic has 2 replies, 2 voices, and was last updated 21 February 2021 at 09:44 by David George 1.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
17 February 2021 at 22:15 #528170
Martin Dowing
Participant
@martindowing58466
I have hardened (60HRc) bars which need to be ground between centers.

They have holes at their ends but these holes are 90 deg. with normal pilot hole drilled deeper so there is no risk of center tip hitting a bottom..

Can these be ground between normal 60 deg. centers on cylindrical grinder?

I need to make slight 2 deg taper on these bars and I wonder if shop with a grinder will fret about these "wrong" holes or not?
Advert

17 February 2021 at 22:15 #10695
Martin Dowing
Participant
@martindowing58466
21 February 2021 at 09:44 #529036
David George 1
Participant
@davidgeorge1
Talk to the grinder they may have different centers or have the equipment to re cutthe center.

David
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- E Bay shot in foot
  Started by: duncan webster 1 in: The Tea Room
- 4
- 4
- 6 March 2025 at 15:57
  Pete.
- Clarkson Tool and Cutter Grinder Operator@s Manual
  Started by: Derek Toller 1 in: Manual machine tools
- 8
- 14
- 6 March 2025 at 15:52
  noel shelley
- Telescope Leadscrew Advice
  Started by: Dr_GMJN in: General Questions
- 2
- 2
- 6 March 2025 at 15:35
  DC31k
- Help identifying some model engines
  Started by: Mat Dodge in: General Questions
- 2
- 4
- 6 March 2025 at 15:32
  Mat Dodge
- Kelsey Media buys Mortons titles 1 2
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 15
- 37
- 6 March 2025 at 15:14
  Colin Bishop
- Vibration and exploring the Fast Fourier Transform with CAD
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 8
- 16
- 6 March 2025 at 13:42
  peter1972
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 11
- 23
- 6 March 2025 at 13:26
  Tomek
- Seen on FaceBook
  Started by: Vic in: The Tea Room
- 1
- 1
- 6 March 2025 at 13:20
  Vic
- Miniature Railway at Olympia (?) around the balcony
  Started by: timdunn in: Exhibitions, Shows and Club Events
- 4
- 4
- 6 March 2025 at 12:00
  Nicholas Farr
- Looking for an OCR package with ‘snap’ facilities
  Started by: Greensands in: The Tea Room
- 11
- 18
- 6 March 2025 at 11:34
  peterhod
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 37
- 6 March 2025 at 11:29
  peterhod
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 6
- 10
- 6 March 2025 at 11:28
  Michael Gilligan
- Resize photos W11
  Started by: duncan webster 1 in: Help and Assistance! (Offered or Wanted)
- 11
- 13
- 6 March 2025 at 10:29
  Russell Eberhardt
- What Did You Do Today 2025 1 2 3
  Started by: JasonB in: The Tea Room
- 19
- 53
- 6 March 2025 at 09:58
  Roderick Jenkins
- Slow Again? 1 2 3
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 54
- 6 March 2025 at 09:50
  SillyOldDuffer
- Prat Burnerd Griptru adjustment
  Started by: vic newey in: Workshop Tools and Tooling
- 6
- 8
- 5 March 2025 at 21:26
  Paul Lousick
- Midlands Model Engineering Exhibition
  Started by: alan ord 2 in: General Questions
- 7
- 8
- 5 March 2025 at 21:10
  Lathejack
- A” WEAVER “1CC DIESEL ENGINE 1 2
  Started by: KEITH BEAUMONT in: I/C Engines
- 8
- 35
- 5 March 2025 at 20:27
  KEITH BEAUMONT
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 9
- 5 March 2025 at 20:18
  celso ari schlichting
- Oil grooves for bushings?
  Started by: keith hodgson in: Help and Assistance! (Offered or Wanted)
- 10
- 13
- 5 March 2025 at 19:11
  keith hodgson
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD! 1 2
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 13
- 31
- 5 March 2025 at 17:03
  bernard towers
- Wood Tool Chests
  Started by: WorkshopPete in: Workshop Tools and Tooling
- 3
- 6
- 5 March 2025 at 15:45
  WorkshopPete
- Rotary table digital readout
  Started by: petetwissell in: Workshop Tools and Tooling
- 2
- 2
- 5 March 2025 at 15:38
  Russell Eberhardt
- Taig lathe DC motor 1 2
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 12
- 35
- 5 March 2025 at 12:33
  Robert Atkinson 2
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 14
- 33
- 5 March 2025 at 11:52
  Graham Horne 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies