5 inch gauge charlatan

5 inch gauge charlatan

This topic has 1 reply, 1 voice, and was last updated 21 June 2023 at 23:35 by richard Parsons 2.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
21 June 2023 at 23:35 #649367
richard Parsons 2
Participant
@richardparsons2
Good evening folks .

I am currently building a 5 inch gauge charlatan to black gates drawings , I've got my frames done with all the holes in the right place , I have machined a pair of horns as a trial , I've drilled the holes in the horn angle that lines up with the frame holes on the frame, however the horn edge that the axle box sits in seems to be over hanging the frame.

is the idea to machine it back when fitting axle boxes ?

any ideas greatly appreciated.

regards Rick
Advert

21 June 2023 at 23:35 #38836
richard Parsons 2
Participant
@richardparsons2
horn angle
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- EV Charging
  Started by: Vic in: The Tea Room
- 1
- 1
- 25 December 2024 at 23:36
  Vic
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 5 6
  Started by: Neil Wyatt in: Model Engineer.
- 52
- 131
- 25 December 2024 at 21:36
  Martin Kyte
- What did you do Today 2024 1 2 … 20 21
  Started by: JasonB in: The Tea Room
- 75
- 521
- 25 December 2024 at 21:09
  Speedy Builder5
- HobbyMat MD65 parts wanted
  Started by: duncan webster 1 in: Manual machine tools
- 3
- 4
- 25 December 2024 at 20:31
  old mart
- Seasons greetings
  Started by: bricky in: The Tea Room
- 21
- 22
- 25 December 2024 at 20:13
  Mark Easingwood
- Swarf build-up
  Started by: gerry madden in: Workshop Techniques
- 13
- 16
- 25 December 2024 at 20:12
  old mart
- Threading a piece if laminated wood 1 2
  Started by: gerry madden in: Workshop Techniques
- 18
- 35
- 25 December 2024 at 20:10
  Mark Easingwood
- Sable 2015 Desktop CNC / engraver 1 2
  Started by: Bazyle in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 26
- 25 December 2024 at 19:36
  JasonB
- How to sort this problem out.
  Started by: Michael Callaghan in: Workshop Techniques
- 13
- 18
- 25 December 2024 at 17:59
  noel shelley
- Condensation Problems in Workshop 1 2
  Started by: John McCulla in: General Questions
- 24
- 42
- 25 December 2024 at 16:57
  Chris Crew
- L5 issue
  Started by: Neil Taylor in: Beginners questions
- 9
- 14
- 25 December 2024 at 16:45
  Chris Crew
- Pencil Sharpener
  Started by: Vic in: The Tea Room
- 3
- 6
- 25 December 2024 at 12:34
  Vic
- Ooops! ‘Bye ‘Bye Alibre Atom
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 6
- 8
- 25 December 2024 at 12:29
  David Jupp
- MMBasic versions for Pico2 & Pico2W now available
  Started by: IanT in: Electronics in the Workshop
- 3
- 4
- 25 December 2024 at 11:28
  Philip Borland
- Replacement Motor Wiring
  Started by: Gary Lynch in: General Questions
- 6
- 16
- 25 December 2024 at 11:10
  noel shelley
- New member from belgium
  Started by: davp1971 in: Introduce Yourself – New members start here!
- 3
- 5
- 25 December 2024 at 10:09
  davp1971
- Forum Post downloads to user
  Started by: Speedy Builder5 in: Website Questions, Comments, and Suggestions
- 7
- 16
- 25 December 2024 at 08:56
  Michael Gilligan
- “Practical Armature Winding”
  Started by: john fletcher 1 in: Books
- 4
- 4
- 25 December 2024 at 07:37
  Speedy Builder5
- Stuart Steam Boiler Feed Pump – Cylinder Scrapped
  Started by: David Deaville in: General Questions
- 7
- 11
- 24 December 2024 at 23:45
  noel shelley
- How do I disassemble Vickers dual metric/imperial dial?
  Started by: Russ B in: Help and Assistance! (Offered or Wanted)
- 8
- 25
- 24 December 2024 at 21:31
  thetiffy
- Scroll Chuck
  Started by: Vic in: The Tea Room
- 5
- 5
- 24 December 2024 at 19:59
  SillyOldDuffer
- Redwing
  Started by: grubscrew in: Stationary engines
- 5
- 7
- 24 December 2024 at 18:25
  JasonB
- New computer ? 1 2
  Started by: Peter Howell 1 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 14
- 27
- 24 December 2024 at 17:33
  Peter Howell 1
- Armortek series 1 landrover kit 1 2
  Started by: Plasma in: Miscellaneous models
- 7
- 30
- 24 December 2024 at 16:53
  Plasma
- Winson L&Y Pug
  Started by: Kevan Shaw in: Locomotives
- 1
- 2
- 24 December 2024 at 16:24
  Kevan Shaw

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies