5″ gauge terrier build

5″ gauge terrier build

This topic has 4 replies, 4 voices, and was last updated 6 March 2020 at 11:15 by John Baguley.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
6 March 2020 at 09:24 #455654
Philip Beckett 1
Participant
@philipbeckett1
Hello folks, can anyone tell me what the 1/2" x 40TPI threads shown on the underside of the steam chest drawing are for? Not having any assembly drawing or instructions i am at a loss as to what they are. Many thanks, Phil.
Advert

6 March 2020 at 09:24 #10106
Philip Beckett 1
Participant
@philipbeckett1
40TPI x 1/2″ threads?
6 March 2020 at 09:50 #455661
Weary
Participant
@weary
I suggest that you ask the question over on Model Engineering Clearing House Forum where there is an active build and a couple of owners who are members.

Regards,

(another) Phil
6 March 2020 at 10:01 #455664
Nick Clarke 3
Participant
@nickclarke3
What design? Not Martin Evans Boxhill looking at the articles.
6 March 2020 at 11:15 #455679
John Baguley
Participant
@johnbaguley78655
For removable plugs so you can see the valves and ports for setting the timing. The drawing in ME shows them as 3/8" x 40

John
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- ER vs Morse collets
  Started by: Sonic Escape in: Beginners questions
- 11
- 12
- 14 March 2025 at 23:47
  Vic
- Great find (7/8″ rock drill), but what alloy?
  Started by: Fulmen in: Materials
- 3
- 4
- 14 March 2025 at 22:46
  bernard towers
- What Did You Do Today 2025 1 2 3
  Started by: JasonB in: The Tea Room
- 19
- 55
- 14 March 2025 at 22:44
  bernard towers
- DC Wasp Rebuild
  Started by: William Chitham in: I/C Engines
- 3
- 4
- 14 March 2025 at 22:21
  Ramon Wilson
- Continuing the Television theme … 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 13
- 29
- 14 March 2025 at 21:32
  Nicholas Farr
- Coin of the Realm
  Started by: Michael Gilligan in: Materials
- 5
- 7
- 14 March 2025 at 21:10
  vintagengineer
- Lowering heating bills
  Started by: old mart in: The Tea Room
- 1
- 1
- 14 March 2025 at 20:59
  old mart
- Slow Again? 1 2 3
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 28
- 69
- 14 March 2025 at 20:34
  roy entwistle
- Forthcoming TV – ‘Masters of Invention’
  Started by: SillyOldDuffer in: Hints And Tips for model engineers
- 3
- 3
- 14 March 2025 at 19:51
  Mike Hurley
- Aircraft General Discussion 1 2 … 80 81
  Started by: John Olsen in: The Tea Room
- 207
- 2,013
- 14 March 2025 at 18:50
  Martin Connelly
- Weldon arbor?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 6
- 10
- 14 March 2025 at 18:48
  Martin Connelly
- Air source heat pumps 1 2
  Started by: Plasma in: The Tea Room
- 16
- 30
- 14 March 2025 at 17:31
  Plasma
- Lathe cutting a taper
  Started by: Chris Mate in: Beginners questions
- 14
- 21
- 14 March 2025 at 16:32
  bernard towers
- Cheap MMA inverter (aka stick welder)?
  Started by: Fulmen in: Workshop Tools and Tooling
- 4
- 10
- 14 March 2025 at 15:49
  noel shelley
- NEW LOOK – Model Engineer & Workshop 1 2 … 7 8
  Started by: sohara in: Model Engineer & Workshop
- 56
- 176
- 14 March 2025 at 14:20
  mike robinson 2
- Good supplier of bandsaw blades please
  Started by: Martin Johnson 1 in: Workshop Tools and Tooling
- 11
- 11
- 14 March 2025 at 12:46
  Howard Lewis
- Where to get a lathe (Myford Super-7) re-ground??
  Started by: flatline in: Beginners questions
- 4
- 4
- 14 March 2025 at 12:34
  parovoz
- Where/How will you be watching ?
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 3
- 5
- 14 March 2025 at 12:24
  bernard towers
- Denford Triac Spindle Problem
  Started by: Richard Evans 2 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 7
- 14 March 2025 at 10:59
  John Haine
- Aluminium – yuck.
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 7
- 15
- 14 March 2025 at 10:03
  Julie Ann
- Razor Blade Sharpener
  Started by: Vic in: The Tea Room
- 7
- 8
- 14 March 2025 at 08:46
  Clive Foster
- Another Fobco Chuck
  Started by: spencerd72 in: Workshop Tools and Tooling
- 6
- 10
- 14 March 2025 at 00:32
  Pete
- 3/16″ lathe chuck key wanted
  Started by: Wink Hackman in: Workshop Tools and Tooling
- 11
- 14
- 13 March 2025 at 23:00
  duncan webster 1
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 9
- 14
- 13 March 2025 at 17:37
  Chris Gill
- Model Turbines 1 2 … 23 24
  Started by: Turbine Guy in: Stationary engines
- 28
- 585
- 13 March 2025 at 17:25
  Turbine Guy

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies