5″ gauge tender hand brake

5″ gauge tender hand brake

This topic has 2 replies, 2 voices, and was last updated 14 November 2020 at 14:28 by Clive Brown 1.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
14 November 2020 at 14:06 #10533
Peter Simpson 1
Participant
@petersimpson1
Advert

14 November 2020 at 14:06 #507432
Peter Simpson 1
Participant
@petersimpson1
At the moment I'm fabrication the tender brakes on my BR3 tender. Each set of wheels has brake blocks pulled on by a central set of pull rods. There are three sets of pull rods which are made to length to suite the actual tender dimensions. There is no adjustment for length so the rods have to be made exactly the right length or the brake will not be applied, Not sure if this was the case in full size tenders. I would have thought a turn buckle arrangement would have be used to allow for brake adjustment, Has anybody fitted adjustment for brake wear. If so what method did you use ?
14 November 2020 at 14:28 #507439
Clive Brown 1
Participant
@clivebrown1
I've put turnbuckles on my unfinished, 6-wheel tender, but I don't think it's mechanically very sound. I expect only one axle to be firmly braked with the other brake blocks basically just rubbing to a geater or lesser extent.

But it's only for parking on a basically level track.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Boiler Examinations: 7-yearly External Query
  Started by: Nigel Graham 2 in: Traction engines
- 4
- 5
- 10 March 2025 at 01:59
  Paul Kemp
- The Decline of Model Engeneering Workshop
  Started by: Paul Lousick in: General Questions
- 4
- 5
- 9 March 2025 at 23:36
  Nick Wheeler
- Vibration and exploring the Fast Fourier Transform with CAD 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 11
- 51
- 9 March 2025 at 23:17
  Julie Ann
- George Thomas retractable slide for the myford.
  Started by: Brian Abbott in: Workshop Tools and Tooling
- 17
- 22
- 9 March 2025 at 23:16
  bernard towers
- BlueBerries
  Started by: Michael Gilligan in: The Tea Room
- 3
- 4
- 9 March 2025 at 22:52
  Vic
- Air source heat pumps
  Started by: Plasma in: The Tea Room
- 11
- 13
- 9 March 2025 at 22:47
  john halfpenny
- 3 1/2″ gauge LMS Jubilee 4-6-0
  Started by: amorrison in: Locomotives
- 5
- 11
- 9 March 2025 at 19:58
  Nicholas Farr
- Oil grooves for bushings?
  Started by: keith hodgson in: Help and Assistance! (Offered or Wanted)
- 12
- 15
- 9 March 2025 at 19:32
  Nimble
- House painting
  Started by: gerry madden in: The Tea Room
- 9
- 11
- 9 March 2025 at 18:30
  Grindstone Cowboy
- FB2 Clone – aligning the column
  Started by: Diogenes in: Manual machine tools
- 9
- 17
- 9 March 2025 at 18:08
  Diogenes
- Commission work to build parts for an RC SUBMARINES
  Started by: ciso in: Related Hobbies including Vehicle Restoration
- 1
- 1
- 9 March 2025 at 17:57
  ciso
- following a thread…?
  Started by: Chris Kaminski in: New Forum Software questions, comments and Test Threads
- 2
- 3
- 9 March 2025 at 16:11
  Chris Kaminski
- What’s this for…no.10?
  Started by: beeza650 in: Beginners questions
- 5
- 5
- 9 March 2025 at 14:55
  KenL
- How to sell my workshop?
  Started by: Tony Martyr in: General Questions
- 7
- 7
- 9 March 2025 at 14:21
  V8Eng
- What’s this for…no.9?
  Started by: beeza650 in: Beginners questions
- 6
- 7
- 9 March 2025 at 13:36
  Nicholas Farr
- Telescope Leadscrew Advice 1 2
  Started by: Dr_GMJN in: General Questions
- 10
- 29
- 9 March 2025 at 10:23
  Michael Gilligan
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 23
- 45
- 9 March 2025 at 09:37
  peterhod
- Kelsey Media buys Mortons titles 1 2 3
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 20
- 65
- 8 March 2025 at 18:39
  SillyOldDuffer
- Raglan vertical milling machine
  Started by: roger kerry in: Manual machine tools
- 6
- 10
- 8 March 2025 at 17:45
  bernard towers
- My week this week! My workshop videos 1 2 … 11 12
  Started by: Phil Whitley in: The Tea Room
- 13
- 281
- 8 March 2025 at 16:02
  Phil Whitley
- How to correctly use a height gauge 1 2 3
  Started by: Graham Wharton in: Workshop Techniques
- 23
- 57
- 8 March 2025 at 15:37
  Howard Lewis
- Rotary table digital readout
  Started by: petetwissell in: Workshop Tools and Tooling
- 6
- 10
- 8 March 2025 at 11:00
  petetwissell
- 24cc DIESEL ENGINE FROM SOLID
  Started by: dean clarke 2 in: I/C Engines
- 8
- 17
- 8 March 2025 at 08:44
  KEITH BEAUMONT
- E Bay shot in foot
  Started by: duncan webster 1 in: The Tea Room
- 10
- 17
- 8 March 2025 at 00:08
  duncan webster 1
- Seen on FaceBook
  Started by: Vic in: The Tea Room
- 4
- 6
- 7 March 2025 at 21:14
  Chris Kaminski

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies