3 for £1 Subscriptions for ME and MEW

3 for £1 Subscriptions for ME and MEW

This topic has 4 replies, 4 voices, and was last updated 16 April 2020 at 17:12 by Enough!.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
16 April 2020 at 15:59 #465066
Neil Wyatt
Moderator
@neilwyatt
We realise that many regular readers who get their magazines from a local newsagent, Menzies or WH Smiths may have problems getting hold of their magazine in the coming weeks.

We've decided to run a 3 months for £1 offer for both Model Engineers' Workshop and Model engineer.

This price applies to print, digital and bundle subscriptions, so this might be a good time to try digital with the bonus that you will get access to the online archive.

To access these offers you must use the links below:

Model Engineers' Workshop: me.secureorder.co.uk/MEW/341FP

Model Engineer: me.secureorder.co.uk/MODE/341FP/

Or call:

0344 243 9023

Or for MEW print out this form (I don't have the ME one to hand, I'm afraid) and post it to the address at bottom left:

The forms for the offer will also appear in the magazines.

Neil
Advert

16 April 2020 at 15:59 #38972
Neil Wyatt
Moderator
@neilwyatt
Special offer on print, digital and bundle.
16 April 2020 at 16:17 #465072
John Rutzen
Participant
@johnrutzen76569
I upgraded my digital subscription to print plus digital on the 20th March. I've not yet received a print copy despite all my efforts to get it sorted out. Perhaps I should have just got 3 for a £1?
16 April 2020 at 16:25 #465074
Bob Unitt 1
Participant
@bobunitt1
Posted by Neil Wyatt on 16/04/2020 15:59:53:Or call:

Or call:

0344 243 9023

I tried calling them on the above number. It went to the right firm, but they had no knowledge of this offer or of the code '341FP'.

Also – does the £1 offer get both magazines, or is it 2 separate £1 offers, one for each magazine ?

Edited By Bob Unitt 1 on 16/04/2020 16:29:50

Edited By Bob Unitt 1 on 16/04/2020 16:30:22
16 April 2020 at 17:12 #465082
Enough!
Participant
@enough
UK Only
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Had Another Go 1 2 … 5 6
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 19
- 144
- 14 January 2025 at 09:47
  David Jupp
- Myford Super 7 questions
  Started by: davp1971 in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 14 January 2025 at 09:46
  davp1971
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 8 9
  Started by: Neil Wyatt in: Model Engineer.
- 60
- 222
- 14 January 2025 at 09:26
  JasonB
- Unkown micrometer manufacturer 1 2
  Started by: Tomk in: Workshop Tools and Tooling
- 12
- 31
- 14 January 2025 at 08:48
  Chris Kaminski
- Internal thread & taper in same hole
  Started by: Dell in: Workshop Techniques
- 9
- 22
- 14 January 2025 at 08:19
  Dell
- Myford Super 7 clutch
  Started by: john fletcher 1 in: Help and Assistance! (Offered or Wanted)
- 8
- 10
- 13 January 2025 at 23:04
  noel shelley
- Fitting chucks to 7 x 12 type baby lathes
  Started by: old mart in: Manual machine tools
- 5
- 8
- 13 January 2025 at 22:59
  Vic
- Mobile workshop
  Started by: Sonic Escape in: The Tea Room
- 9
- 13
- 13 January 2025 at 22:57
  Sonic Escape
- A rather old contributor
  Started by: Sam Stones in: The Tea Room
- 8
- 9
- 13 January 2025 at 22:11
  Sam Stones
- Weiss 290 Lathe Power Issue
  Started by: thisdesignedthat in: Manual machine tools
- 5
- 8
- 13 January 2025 at 21:17
  SillyOldDuffer
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 328
- 13 January 2025 at 21:16
  Brian Abbott
- Subscriptions – Going Forward 1 2 … 4 5
  Started by: JasonB in: Subscription issues and Digital magazines
- 36
- 109
- 13 January 2025 at 18:50
  JasonB
- Mill Power feed unit. 1 2 3
  Started by: Taf_Pembs in: Manual machine tools
- 21
- 58
- 13 January 2025 at 15:47
  old mart
- Coal 1 2
  Started by: Michael Callaghan in: General Questions
- 21
- 44
- 13 January 2025 at 11:06
  duncan webster 1
- Family tree prog
  Started by: JimmieS in: The Tea Room
- 11
- 16
- 13 January 2025 at 10:00
  Nicholas Farr
- Powder coating
  Started by: John MC in: The Tea Room
- 7
- 8
- 12 January 2025 at 19:32
  Bazyle
- Lurker looking to help somone
  Started by: peterhod in: Introduce Yourself – New members start here!
- 6
- 7
- 12 January 2025 at 19:21
  peterhod
- Making a flat spring
  Started by: David K in: General Questions
- 7
- 10
- 12 January 2025 at 18:55
  Diogenes
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 6
- 18
- 12 January 2025 at 16:31
  old mart
- Editing an STL file
  Started by: Paul L in: CAD – Technical drawing & design
- 8
- 16
- 12 January 2025 at 14:59
  Paul L
- Flashing Multiple LEDs at the Same Time
  Started by: James Alford in: Electronics in the Workshop
- 5
- 6
- 12 January 2025 at 12:57
  peter1972
- small boring head
  Started by: celso ari schlichting in: General Questions
- 4
- 4
- 12 January 2025 at 12:36
  Tony Pratt 1
- Motorcycle battery charging? Lithium.. 1 2
  Started by: Ian Parkin in: Related Hobbies including Vehicle Restoration
- 17
- 46
- 12 January 2025 at 11:40
  Michael Gilligan
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 7
- 14
- 11 January 2025 at 20:18
  JasonB
- What Did You Do Today 2025
  Started by: JasonB in: The Tea Room
- 12
- 19
- 11 January 2025 at 18:37
  Diogenes

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies