220 volt ac motor

220 volt ac motor

This topic has 1 reply, 2 voices, and was last updated 23 October 2024 at 19:40 by noel shelley.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
23 October 2024 at 16:36 #760802
VC
Participant
@vc44480
Hi to all

Need help/advice

Would like to be able to reverse my lathe motor sorry makers name has worn off

there are three terminals inside the motor 1 2 and 4 which can be used

at the moment 1 has brown wire connected nothing on 2 and blue on 4 I do have a drum switch

so any help of how to wire this would be great

Thanks in advance
Advert

23 October 2024 at 19:40 #760838
noel shelley
Participant
@noelshelley55608
Is the drum reverser a Dewhurst ? If so then the wiring diagram is easy. A picture of the motor and a rough idea as to age. There should be 4 wires 2 for start and 2 for run but there may be an internal connection. one common code is red and black for run and yellow and blue for start. Make sure you have a good earth on the motor. Noel.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- How to sort this problem out.
  Started by: Michael Callaghan in: Workshop Techniques
- 5
- 5
- 22 December 2024 at 14:04
  noel shelley
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 4
- 5
- 22 December 2024 at 13:16
  AStroud
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 3 4
  Started by: Neil Wyatt in: Model Engineer.
- 43
- 81
- 22 December 2024 at 12:55
  IanT
- Dial gauge troubles
  Started by: Roger Hart in: Workshop Tools and Tooling
- 8
- 12
- 22 December 2024 at 12:02
  peak4
- Help for DIY lathe build.
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 5
- 5
- 22 December 2024 at 11:51
  noel shelley
- Recommissioning a small vertical boiler
  Started by: Mark Salzedo 1 in: General Questions
- 6
- 14
- 22 December 2024 at 11:39
  SillyOldDuffer
- ELS for BOXFORD AUD 1 2 3
  Started by: Speedy Builder5 in: Workshop Tools and Tooling
- 17
- 55
- 22 December 2024 at 11:21
  Speedy Builder5
- L5 issue
  Started by: Neil Taylor in: Beginners questions
- 6
- 11
- 22 December 2024 at 10:43
  Emgee
- Warco 720 1 2
  Started by: Mick Bailey in: Manual machine tools
- 11
- 26
- 22 December 2024 at 08:04
  Nicholas Farr
- Drilling holes in boiler banding.
  Started by: Michael Callaghan in: Hints And Tips for model engineers
- 8
- 10
- 22 December 2024 at 07:03
  JasonB
- Model Engineering Survey – What Do YOU make? 1 2 3 4
  Started by: SillyOldDuffer in: General Questions
- 52
- 80
- 21 December 2024 at 23:01
  SillyOldDuffer
- Microscope marking objective
  Started by: old mart in: Clocks and Scientific Instruments
- 6
- 16
- 21 December 2024 at 20:48
  old mart
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 1
- 1
- 21 December 2024 at 20:18
  old mart
- Some VERY interesting LED modules 1 2 … 5 6
  Started by: Michael Gilligan in: Electronics in the Workshop
- 18
- 131
- 21 December 2024 at 19:23
  SillyOldDuffer
- 775 Motor based Dynamo ? 1 2
  Started by: JasonB in: Miscellaneous models
- 6
- 47
- 21 December 2024 at 18:48
  JasonB
- Sable 2015 Desktop CNC / engraver
  Started by: Bazyle in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 17
- 21 December 2024 at 17:54
  John Haine
- GRIPTRU Chuck adjust
  Started by: Speedy Builder5 in: Workshop Techniques
- 12
- 19
- 21 December 2024 at 14:31
  Michael Gilligan
- What did you do Today 2024 1 2 … 20 21
  Started by: JasonB in: The Tea Room
- 75
- 518
- 21 December 2024 at 14:30
  bernard towers
- Miniatur Wunderland
  Started by: Paul Lousick in: Miscellaneous models
- 3
- 3
- 21 December 2024 at 11:30
  noel shelley
- The Future of Model Engineer and Model Engineers’ Workshop magazines.
  Started by: Neil Wyatt in: Model Engineer.
- 8
- 11
- 21 December 2024 at 07:09
  JasonB
- 30 Year old MOTORUN 3 Phase Static converter 1 2 3 4
  Started by: mr fixit in: Introduce Yourself – New members start here!
- 16
- 85
- 20 December 2024 at 21:55
  John Hinkley
- Sacrificial pin
  Started by: Bernard Start in: The Tea Room
- 14
- 20
- 20 December 2024 at 21:47
  old mart
- CL430/500 Lathe Tooling size
  Started by: Gary Lynch in: Beginners questions
- 7
- 8
- 20 December 2024 at 21:14
  old mart
- Clarkson 24mm x 38mm Vertical
  Started by: JasonB in: Stationary engines
- 1
- 1
- 20 December 2024 at 18:31
  JasonB
- How is this chuck mounted? 1 2
  Started by: Mick Bailey in: Manual machine tools
- 15
- 28
- 20 December 2024 at 17:16
  Mick Bailey

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4758

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies