2 1/2″ BSW Nuts

2 1/2″ BSW Nuts

This topic has 4 replies, 4 voices, and was last updated 3 October 2016 at 09:04 by Chris Evans 6.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
2 October 2016 at 21:27 #21538
David Blight
Participant
@davidblight39097
Advert

2 October 2016 at 21:27 #258902
David Blight
Participant
@davidblight39097
Does anyone know a supplier of 2 1/2" BSW Nuts ?

Require 4 No. for the holding down bolts on the bearing blocks of a 20 ton winding hoist (Static, not in use) at our local Cornish heritage tin mining museum, see kingedwardmine.co.uk

David
2 October 2016 at 21:49 #258906
V8Eng
Participant
@v8eng
**LINK**

There was a thread looking for large imperial nuts on here recently, it might be worth you looking at that for potential suppliers.

I have put a link at the top of this post to the thread.

Another contact might be the "London Museum of Water and Steam".

They run very large engines, some "Cornish Engines" and might have a source of parts supply, link below.

http://www.waterandsteam.org.uk/

Edited By V8Eng on 02/10/2016 22:10:42
3 October 2016 at 00:46 #258927
Neil Wyatt
Moderator
@neilwyatt
Sneak along to the Forth Bridge at night with a big spanner? Surely they won't miss a handful?

N.
3 October 2016 at 09:04 #258952
Chris Evans 6
Participant
@chrisevans6
Lots of nut and bolt makers around. I used to work next door to one.

Stanley Horne & Son, Bentley Mill Close, Walsall, West Midlands.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Denatured Alcohol fuel alternative
  Started by: martino in: General Questions
- 7
- 8
- 27 December 2024 at 02:13
  martino
- EV Charging
  Started by: Vic in: The Tea Room
- 6
- 6
- 27 December 2024 at 01:14
  duncan webster 1
- Parvalux motor – help please
  Started by: Mike Waldron in: Manual machine tools
- 14
- 23
- 27 December 2024 at 00:36
  Duff Machinist
- Spindle bearings for a Delta drill press
  Started by: Duff Machinist in: Manual machine tools
- 1
- 1
- 27 December 2024 at 00:10
  Duff Machinist
- Stuart Steam Boiler Feed Pump – Cylinder Scrapped
  Started by: David Deaville in: General Questions
- 7
- 13
- 26 December 2024 at 23:27
  duncan webster 1
- Ooops! ‘Bye ‘Bye Alibre Atom
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 7
- 10
- 26 December 2024 at 23:19
  duncan webster 1
- Pencil Sharpener
  Started by: Vic in: The Tea Room
- 6
- 9
- 26 December 2024 at 23:14
  duncan webster 1
- Interesting software tool
  Started by: John Haine in: Clocks and Scientific Instruments
- 1
- 1
- 26 December 2024 at 22:48
  John Haine
- Some VERY interesting LED modules 1 2 … 5 6
  Started by: Michael Gilligan in: Electronics in the Workshop
- 19
- 135
- 26 December 2024 at 22:11
  Mark Easingwood
- Threading a piece if laminated wood 1 2
  Started by: gerry madden in: Workshop Techniques
- 18
- 39
- 26 December 2024 at 22:07
  SillyOldDuffer
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 5 6
  Started by: Neil Wyatt in: Model Engineer.
- 54
- 148
- 26 December 2024 at 21:54
  Bazyle
- What did you do Today 2024 1 2 … 21 22
  Started by: JasonB in: The Tea Room
- 76
- 528
- 26 December 2024 at 21:19
  Sonic Escape
- Armortek series 1 landrover kit 1 2
  Started by: Plasma in: Miscellaneous models
- 7
- 31
- 26 December 2024 at 17:53
  Plasma
- A couple of ‘soon to be available in the UK’ lathes that look interesting 1 2
  Started by: Lee Cooper in: Manual machine tools
- 12
- 36
- 26 December 2024 at 15:46
  jaCK Hobson
- Help for DIY lathe build.
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 26 December 2024 at 11:30
  moogie
- HobbyMat MD65 parts wanted
  Started by: duncan webster 1 in: Manual machine tools
- 4
- 5
- 26 December 2024 at 08:31
  Roger B
- Seasons greetings
  Started by: bricky in: The Tea Room
- 21
- 22
- 25 December 2024 at 20:13
  Mark Easingwood
- Swarf build-up
  Started by: gerry madden in: Workshop Techniques
- 13
- 16
- 25 December 2024 at 20:12
  old mart
- Sable 2015 Desktop CNC / engraver 1 2
  Started by: Bazyle in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 26
- 25 December 2024 at 19:36
  JasonB
- How to sort this problem out.
  Started by: Michael Callaghan in: Workshop Techniques
- 13
- 18
- 25 December 2024 at 17:59
  noel shelley
- Condensation Problems in Workshop 1 2
  Started by: John McCulla in: General Questions
- 24
- 42
- 25 December 2024 at 16:57
  Chris Crew
- L5 issue
  Started by: Neil Taylor in: Beginners questions
- 9
- 14
- 25 December 2024 at 16:45
  Chris Crew
- MMBasic versions for Pico2 & Pico2W now available
  Started by: IanT in: Electronics in the Workshop
- 3
- 4
- 25 December 2024 at 11:28
  Philip Borland
- Replacement Motor Wiring
  Started by: Gary Lynch in: General Questions
- 6
- 16
- 25 December 2024 at 11:10
  noel shelley
- New member from belgium
  Started by: davp1971 in: Introduce Yourself – New members start here!
- 3
- 5
- 25 December 2024 at 10:09
  davp1971

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies