10″ SIP HD BANDSAW FIX

10″ SIP HD BANDSAW FIX

This topic has 2 replies, 2 voices, and was last updated 17 October 2021 at 13:34 by larry phelan 1.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
16 October 2021 at 19:40 #567092
noel shelley
Participant
@noelshelley55608
Yesterday I was given an almost new SIP 10"bandsaw because the upper wheel had shed it's rubber lining ! A quick look at the assorted inner tubes I have and a pair of scissors cut a 1/2" wide band out of a 10" tube that is a perfect fit. To stop it rippling on the wheel I will bond it with bostic or similar. The reason it was given to me was that the replacement wheels are not available. One could have used 2mm x 12mm rubber strip and scarfed the joint a 1m length would be enough. I might even try something like this on the Dewalt that mice eat the rubber covered wheels on. Ah well. Noel
Advert

16 October 2021 at 19:40 #14375
noel shelley
Participant
@noelshelley55608
17 October 2021 at 13:34 #567150
larry phelan 1
Participant
@larryphelan1
Feed the mice, it,s cheaper !
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Lathe Chuck thread size
  Started by: Bootlegger Blacky in: Workshop Tools and Tooling
- 3
- 3
- 21 February 2025 at 18:25
  DC31k
- Just purchased a lot of stuff
  Started by: beeza650 in: Beginners questions
- 3
- 5
- 21 February 2025 at 18:09
  Tony Pratt 1
- Cannot access homeworkshop.
  Started by: Graham Titman in: The Tea Room
- 4
- 5
- 21 February 2025 at 17:57
  Graham Titman
- Apple’s reaction to U.K. Gov
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 21 February 2025 at 17:56
  Michael Gilligan
- Lathe help information
  Started by: maccecht in: Help and Assistance! (Offered or Wanted)
- 11
- 22
- 21 February 2025 at 16:59
  Bootlegger Blacky
- Electric Mobility
  Started by: Vic in: The Tea Room
- 3
- 5
- 21 February 2025 at 16:00
  Michael Gilligan
- VERY delicate rust removal
  Started by: beeza650 in: Beginners questions
- 11
- 16
- 21 February 2025 at 14:55
  ryan.carter848
- indexing head lathe 1 2
  Started by: Danni Burns in: Manual machine tools
- 15
- 33
- 21 February 2025 at 14:49
  Danni Burns
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 10 11
  Started by: Neil Wyatt in: Model Engineer.
- 68
- 268
- 21 February 2025 at 14:30
  duncan webster 1
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 8
- 18
- 21 February 2025 at 13:22
  Colin Bishop
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 51
- 156
- 21 February 2025 at 13:03
  JasonB
- Interesting USB C Cable
  Started by: Vic in: The Tea Room
- 2
- 3
- 21 February 2025 at 12:54
  Vic
- End mill sharpening fixture
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 21 February 2025 at 10:18
  JohnF
- New Member – Unimat 3 Owner
  Started by: pennyblack in: Introduce Yourself – New members start here!
- 2
- 2
- 21 February 2025 at 09:57
  Graham Meek
- Digital Log In
  Started by: John Ross 4 in: General Questions
- 2
- 3
- 21 February 2025 at 09:46
  John Ross 4
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 4
- 6
- 21 February 2025 at 09:36
  noel shelley
- New Myford Owner with Problems!!!
  Started by: Richard Bartholomew 3 in: Introduce Yourself – New members start here!
- 11
- 14
- 21 February 2025 at 09:12
  Charles Lamont
- SHARP PRACTICE ?
  Started by: Speedy Builder5 in: The Tea Room
- 10
- 19
- 20 February 2025 at 23:41
  Vic
- Cranko No2 Oscillating Horizontal Steam Engine from New Zealand circ 1940 – 1950
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 20 February 2025 at 23:23
  Blue Heeler
- Cut & Paste Oddity (Textual)?
  Started by: Nigel Graham 2 in: The Tea Room
- 1
- 1
- 20 February 2025 at 22:53
  Nigel Graham 2
- Telephone call-blocking
  Started by: Michael Gilligan in: The Tea Room
- 7
- 16
- 20 February 2025 at 21:07
  Paul Lousick
- A Marine Condensing Engine 1 2 … 5 6
  Started by: Ramon Wilson in: Work In Progress and completed items
- 26
- 129
- 20 February 2025 at 18:12
  Ramon Wilson
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 9
- 16
- 20 February 2025 at 17:48
  Michael Gilligan
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 109
- 20 February 2025 at 17:08
  Graham Meek
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 18
- 92
- 20 February 2025 at 16:50
  SillyOldDuffer

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies