1 1/2″ scale Fowler showmanship engine.

1 1/2″ scale Fowler showmanship engine.

This topic has 5 replies, 2 voices, and was last updated 17 August 2016 at 19:39 by Maurice Cox 1.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
17 August 2016 at 14:43 #2843
Maurice Cox 1
Participant
@mauricecox1
Advert

17 August 2016 at 14:43 #251136
Maurice Cox 1
Participant
@mauricecox1
I have acquired a part built 1 1/2" scale Fowler showman's engine. Much of it is fabricated, but the parts include some castings, notably the fly wheel and compensating centre. Does anyone know if castings and drawings are, or were ever marketed for this engine? I can find nothing in my searches. It is the drawings that I am after. Thanks,

Maurice
17 August 2016 at 15:05 #251143
JasonB
Moderator
@jasonb
Possibly an Every or Simmonds one but I don't have any drawings.

Edited By JasonB on 17/08/2016 15:18:38
17 August 2016 at 15:09 #251144
Maurice Cox 1
Participant
@mauricecox1
Thanks Jason, I'll try searching with those names,
17 August 2016 at 15:13 #251145
JasonB
Moderator
@jasonb
Maurice not my spelling correction.

A. J. Every and Dick Simmonds & co

I have an advert somewhere which lists the engines they did.

Edited By JasonB on 17/08/2016 15:18:50
17 August 2016 at 19:39 #251174
Maurice Cox 1
Participant
@mauricecox1
Thanks again Jason.

Maurice.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Small butane torch refilling.
  Started by: YouraT in: Workshop Tools and Tooling
- 13
- 18
- 6 February 2025 at 04:48
  Michael Gilligan
- shopmade single flute end mill
  Started by: celso ari schlichting in: General Questions
- 3
- 3
- 6 February 2025 at 04:36
  Michael Gilligan
- Parting off – Left over nib
  Started by: Blue Heeler in: Workshop Techniques
- 3
- 4
- 5 February 2025 at 23:49
  howardb
- CNC mill on its stand
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 1
- 1
- 5 February 2025 at 21:38
  Dave S
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 20
- 26
- 5 February 2025 at 21:37
  peak4
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 9
- 13
- 5 February 2025 at 20:20
  parovoz
- Pittler spiral cutting test
  Started by: vic newey in: Workshop Techniques
- 9
- 21
- 5 February 2025 at 20:16
  vic newey
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 22
- 5 February 2025 at 19:07
  JasonB
- The most difficult project?
  Started by: Tony Martyr in: Stationary engines
- 5
- 14
- 5 February 2025 at 18:27
  Ian Hewson
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 333
- 5 February 2025 at 16:07
  JasonB
- Pennsylvania A3 Switcher 1 2 3
  Started by: Mark Elen 1 in: Work In Progress and completed items
- 18
- 58
- 4 February 2025 at 17:52
  Mark Elen 1
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 6
- 24
- 4 February 2025 at 17:50
  David George 1
- The wonders of AI… 1 2
  Started by: Robin Graham in: The Tea Room
- 15
- 42
- 4 February 2025 at 15:42
  Russell Eberhardt
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 10
- 13
- 4 February 2025 at 15:21
  Nicholas Farr
- Email messages on the Forum.
  Started by: Andrew Tinsley in: General Questions
- 3
- 8
- 4 February 2025 at 14:38
  David Jupp
- Myford Topslide base casting graduations
  Started by: Martin Kyte in: Workshop Tools and Tooling
- 8
- 19
- 4 February 2025 at 11:11
  Martin Kyte
- 1911 Harley Davidson 7D twin
  Started by: Luker in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 4 February 2025 at 05:29
  Luker
- question about correcting error introduced by using straight slide in valve gear
  Started by: Chris Kaminski in: Locomotives
- 5
- 19
- 4 February 2025 at 05:03
  Chris Kaminski
- Bassett Lowke “Eclipse”
  Started by: JasonB in: Stationary engines
- 6
- 16
- 3 February 2025 at 20:57
  Jim Nic
- Alibre Workshop/Meshcam pro
  Started by: Ian McVickers in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 8
- 3 February 2025 at 19:21
  JasonB
- What Did You Do Today 2025 1 2
  Started by: JasonB in: The Tea Room
- 19
- 49
- 3 February 2025 at 18:07
  Bo’sun
- Robert Atkinson will be proud of me :) 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 19
- 33
- 3 February 2025 at 11:52
  John MC
- Had Another Go 1 2 … 14 15
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 356
- 3 February 2025 at 07:49
  David Jupp
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 4
- 6
- 2 February 2025 at 21:54
  Vic
- NEW LOOK – Model Engineer & Workshop 1 2 3 4
  Started by: sohara in: Model Engineer & Workshop
- 36
- 95
- 2 February 2025 at 18:33
  Graham Titman

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies