Multifix Tool System

Advert

New Replies

Report Bug

Help/FAQs

Multifix Tool System

This topic has 27 replies, 13 voices, and was last updated 16 February 2022 at 07:09 by Russell Allsop.

Viewing 25 posts - 1 through 25 (of 28 total)

1 2 →

Author

Posts

6 April 2016 at 11:39 #8086

Steve Keys 1

Participant

@stevekeys1

Advert

6 April 2016 at 11:39 #233524

Steve Keys 1

Participant

@stevekeys1

Hi all Newbie to the site so please bare with me

I have upgraded from a ML7 to a Super7 MYFORD I am thinking of changing to a MULTIFIX QCTPH tooling system but having had problems with after market tool-holders from China that don't fit i need advise on

1 Dose anybody use this system on a MYford and the PROS & Cons

I have been in touch with Createtools who recommended the Aa size unit

I have also been in touch with PeWetools who recommends the ASD 1460 system

3 Which one do i go for???

As they a both made in CHINA what is the Quality like??

Any advise or comments would be helpful

6 April 2016 at 12:22 #233529

Nick_G

Participant

@nick_g

I have and recommend the multifix style from these guys in 'Das Fatherland' **LINK**

I tad more expensive (but not much) than the far east versions but an excellent product.

edit : This may be a better link :- http://www.top-maschinen.de/metallbearbeitung/spannwerkzeuge/multifix-stahlhalter.html Set your browser to translate.

Nick

Edited By Nick_G on 06/04/2016 12:35:07

6 April 2016 at 15:17 #233538

Nick Hughes

Participant

@nickhughes97026

I use the Aa size from here:-

**LINK**

With no problems.

Nick.

6 April 2016 at 15:52 #233540

S.D.L.

Participant

@s-d-l

Posted by Steve Keys 1 on 06/04/2016 11:39:38:

Hi all Newbie to the site so please bare with me

1 Dose anybody use this system on a MYford and the PROS & Cons

I have been in touch with Createtools who recommended the Aa size unit

I have also been in touch with PeWetools who recommends the ASD 1460 system

3 Which one do i go for???

As they a both made in CHINA what is the Quality like??

Any advise or comments would be helpful

I have the Aa from Create that I purchased direct just factor in customs clearance of about £25.

Will take a 10mm replaceable tipped tool and be on centre as a guide.

They will do a deal for kit and more holders sometimes.

I think the Rotagrip ones are the Create.

Steve

edit correct RDG to Rotagrip

Edited By S.D.L. on 06/04/2016 15:53:25

6 April 2016 at 17:01 #233549

Muzzer

Participant

@muzzer

The beer vouchers have started to pile up again so I may finally buy a set of A sized (next size up) for my Bantam from Create. For a full set of post and 9 various holders, that's going to come in at around $462 (US) including carriage. Even allowing for £40 or so of customs that's going to be about £370. Works out quite a bit cheaper than the European ones which are mostly Chinese anyway, yet the Create system seems to be well reviewed. Funnily enough, they wouldn't give me a better price if I bought them in China.

The weird guy from PeWe Tools (Chinese made, although I think he was trying to gloss that bit over) charges more for sets than individual tool holders and wouldn't even level the prices for a large sale so I made my excuses and left. I don't know what he was drinking – strange way to do business but what would I know.

The Create quotation:

	pcs	G.W.(KG)	USD
Multifix A Set(5 PCS)	1	4.62	230.00
AD2090	3	2.40	96.00
AH2085	1	0.75	33.20
Shipping cost:		7.77	102.70
			461.90(5 – 7 business days from China to your address via DHL)

Edited By Muzzer on 06/04/2016 17:03:12

6 April 2016 at 17:34 #233552

Clive Hartland

Participant

@clivehartland94829

Having used Multifix for 25 years of working I cannot praise the system too much. It always did everything that was needed. Tools can be left in the block and go straight onto the holder and be used without any adjustment for height needed. Just buy the one that suits your machine and buy extra holders as needed.

6 April 2016 at 17:39 #233553

Mike Bondarczuk

Participant

@mikebondarczuk27171

I have recently purchased a complete Multifix set in size A plus an additional five more AD 2090 holders directly from Create in China and the complete order came to just over £300 and then I just had to pay £22 customs duty at the door when it was being delivered.

The only problem I had was what I thought was some surface rust on the tube spanner assembly so reported it to Create and they immediately sent me a free of charge replacement. The rust was a actually only an oily stain which came fully off so now I have two such tube spanners, which is always handy.

I would certainly recommend Create as a supplier and have no affiliation to them other than being a very satisfied customer.

Mike

14 April 2016 at 16:44 #234610

Steve Keys 1

Participant

@stevekeys1

Thank you to all the people who responded to my inquiry

I have ordered an Aa multifix from Create

Thank you

Steve

14 April 2016 at 17:13 #234611

Clive Hartland

Participant

@clivehartland94829

Steve, the center post hole is 13mm diameter so you will need a sleeve to fit the tool post correctly.

Clive

14 April 2016 at 18:12 #234613

terry simpson 1

Participant

@terrysimpson1

I have an original Multifix Toolholder attached to my Myford S7 with 3 holders at the moment. I am considering purchasing a further two holders from EU and China suppliers but am in doubt as to the compatability of other manufacturers holders to fit to the Multifix column giving the rigidity of the original toolpost.

Has any of our brethren bought any of the toolholders, if so, what was the fit and performance of the copied parts.

Many thanks.

Terry S.

15 April 2016 at 09:40 #234676

Steve Keys 1

Participant

@stevekeys1

Clive THANKS for the info will let you know how i get on

Next item Thinking of fitting a allendale magnetic DRO looked at a lot of info on fitting but nobody seems to mention on resighting the saddle clamp bolt???

any ideas

Steve

15 April 2016 at 10:04 #234678

Clive India

Participant

@cliveindia

Some people install a new one on the front.

Someone did a design which was installed on an extended stud on the thread index.

Will try to find it.

15 April 2016 at 10:13 #234679

Nick Hughes

Participant

@nickhughes97026

Terry,

I don't know about the smaller types, but the two Colchester 2500's I use at work, are fitted with one Genuine Swiss Multifix toolpost including 5 genuine holders and one copy toolpost, with 5 copy holders. The holders swap around between the two without any problem.

Nick.

15 April 2016 at 11:14 #234691

Anthony Kendall

Participant

@anthonykendall53479

With respect to the saddle clamp, a chap calling himself staffordshirechina posted this picture in another forum showing his solution for re-positioning the saddle clamp after DRO installation which appealed to me.

16 April 2016 at 13:23 #234815

Nick Hughes

Participant

@nickhughes97026

Simillar to my solution:-

Just made a spacer and longer stud, to mount the Indicator.

19 April 2016 at 16:16 #235279

Muzzer

Participant

@muzzer

See what you've done now. I finally ordered my A sized set (Bantam etc) from Create on Tuesday last week and they arrived yesterday – 6 days door to door via DHL (from Hong Kong). The price had gone up slightly but the carriage had gone down almost by the same amount, so price was almost unchanged at $468 / £339 plus £21 duty.

I have no means of actually trying them out in my armchair workshop but they certainly look well made. For now I'll have to make do with taking them out occasionally and giving them a good rub and a polish.

Merry

19 April 2016 at 16:28 #235285

Anonymous

Posted by Muzzer on 19/04/2016 16:16:08:

………and giving them a good rub and a polish.

Steady on there, you might release the workshop genie, and he'll be mighty upset if he finds the workshop isn't finished!

Andrew

19 April 2016 at 16:41 #235288

Clive Hartland

Participant

@clivehartland94829

Oooh, your making me all jealous, again!

19 April 2016 at 17:12 #235293

Steve Keys 1

Participant

@stevekeys1

My Multifix arrived today???

BUT the lad did not have the TAX papers so no receipt???

Another restless night

back tomorrow

Steve

19 April 2016 at 17:18 #235295

Nick_G

Participant

@nick_g

Nice.

Nick

19 April 2016 at 17:44 #235299

Muzzer

Participant

@muzzer

Can't you get the paperwork from DHL website using the job number? Not done it myself as I can't claim for this. I had to reimburse them for the duty/VAT but I've no need for the paperwork myself.

19 April 2016 at 18:27 #235304

Steve Keys 1

Participant

@stevekeys1

I chose not to accept delivery without a receipt in case they bill me again

This time of night tomorrow is not so far away

Lets hope he comes back

Steve

23 October 2016 at 16:54 #262553

Steve Keys 1

Participant

@stevekeys1