Greenly Under Type Compound Engine

Greenly Under Type Compound Engine

This topic has 3 replies, 4 voices, and was last updated 25 July 2024 at 09:12 by Bob Worsley.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
24 July 2024 at 22:49 #743337
Harry Wilkes
Participant
@harrywilkes58467
I have seen a engine which I’m interested in however the pump is missing, the engine in question is a Henry Greenly compound under type 1.5 inch scale from what info I’ve found are that details of the construction and drawings can be found in Greenly’s articles, published in volumes 8 to 11 of “Model Engineer” magazine, 1903-4. By any chance any members would have these volumes are any details of it’s pump

Thanks

H
Advert

25 July 2024 at 07:42 #743357
Michael Gilligan
Participant
@michaelgilligan61133
Looks like you should find a friendly correspondent in the USA, Harry:

https://onlinebooks.library.upenn.edu/webbin/serial?id=modelengelec

MichaelG.
25 July 2024 at 07:56 #743361
JasonB
Moderator
@jasonb
The H A Taylor updated one was featured in the 70s so you may have a bit more luck with those articles.

Maxitrak list the drawings as part of the Greenly archive

Couple of members seem to have them, may be worth a PM. See this thread.
25 July 2024 at 09:12 #743378
Bob Worsley
Participant
@bobworsley31976
The HA Taylor update isn’t exactly the same, but the drawings are available from Sarik. The original boiler was rivetted and soft soldered, would need the new drawing to update this as a minimum.

I have the first volume, 1906 I thought, with the A3 sized drawing plus a few other piece parts, nothing that isn’t available from the Taylor version.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Cylinder honing?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 3
- 3
- 25 July 2024 at 13:35
  Clive Brown 1
- MEW 342 1 2 3
  Started by: Michael Gilligan in: Model Engineers’ Workshop.
- 19
- 57
- 25 July 2024 at 13:14
  Andrew Skinner
- Oven Wiring 1 2 3
  Started by: Vic in: The Tea Room
- 20
- 71
- 25 July 2024 at 13:12
  Michael Gilligan
- Where can I buy this thing? :)
  Started by: Sonic Escape in: The Tea Room
- 7
- 9
- 25 July 2024 at 13:08
  bernard towers
- Are Pythons now extinct? 1 2
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 12
- 31
- 25 July 2024 at 13:03
  peak4
- Slowing a motor on a potter’s wheel 1 2
  Started by: mrcharly in: Beginners questions
- 18
- 37
- 25 July 2024 at 12:32
  peak4
- Bans saw motor conversion or adaption.
  Started by: David Leahy 1 in: Beginners questions
- 8
- 9
- 25 July 2024 at 12:19
  SillyOldDuffer
- MEW 341 “How to Build a Seismometer” 1 2
  Started by: MikeK in: Model Engineers’ Workshop.
- 16
- 36
- 25 July 2024 at 10:58
  John Haine
- Getting the most from your Brushless Mill
  Started by: Neil Wyatt in: Model Engineers’ Workshop.
- 2
- 8
- 25 July 2024 at 10:36
  JasonB
- Seen on FaceBook
  Started by: Vic in: The Tea Room
- 8
- 9
- 25 July 2024 at 10:13
  Andrew Tinsley
- Brazing parts – bronze equivalent to solder paste
  Started by: migman in: Beginners questions
- 9
- 21
- 25 July 2024 at 10:08
  Andrew Tinsley
- Finding a lost part
  Started by: MikeK in: The Tea Room
- 11
- 15
- 25 July 2024 at 09:38
  Howard Lewis
- Greenly Under Type Compound Engine
  Started by: Harry Wilkes in: The Tea Room
- 4
- 4
- 25 July 2024 at 09:12
  Bob Worsley
- Cromwell Smallpeice Lathe restoration, advice required
  Started by: lucerne in: Help and Assistance! (Offered or Wanted)
- 7
- 13
- 25 July 2024 at 02:36
  Hopper
- TRUBOR Stub Drills
  Started by: Greensands in: Workshop Tools and Tooling
- 6
- 7
- 24 July 2024 at 21:00
  old mart
- MCB for battery loco
  Started by: duncan webster 1 in: Locomotives
- 5
- 15
- 24 July 2024 at 17:47
  SillyOldDuffer
- Extended/long reach Centre Drill Bits?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 8
- 12
- 24 July 2024 at 16:02
  Vic
- ME and MEW free – if you are in France
  Started by: simondavies3 in: The Tea Room
- 1
- 1
- 24 July 2024 at 14:25
  simondavies3
- Myford Super 7 Lathe Service
  Started by: byron in: Manual machine tools
- 3
- 4
- 24 July 2024 at 09:33
  Hopper
- Farm Boy 1 2 3
  Started by: Dalboy in: I/C Engines
- 13
- 74
- 23 July 2024 at 22:03
  Dalboy
- Jaques Maurel blade tension meter.
  Started by: Andrew Tinsley in: Workshop Techniques
- 2
- 3
- 23 July 2024 at 21:56
  Andrew Tinsley
- Comments (constructive) on the New Forum Software 1 2 … 34 35
  Started by: JasonB in: New Forum Software questions, comments and Test Threads
- 134
- 873
- 23 July 2024 at 20:14
  Ian P
- Dasqua Digital Caliper, any good? 1 2
  Started by: alan ord 2 in: General Questions
- 17
- 35
- 23 July 2024 at 19:28
  alan ord 2
- 6 x 4 bandsaw blade clamp on tool, to check vertical
  Started by: Andrew Tinsley in: Workshop Techniques
- 7
- 13
- 23 July 2024 at 18:43
  Howard Lewis
- Issue 3748 front cover
  Started by: duncan webster 1 in: Model Engineer.
- 2
- 2
- 23 July 2024 at 18:15
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4747

August 2024

Buy Latest/Back Issues

Latest Replies