Which bronze?

Advert

New Replies

Report Bug

Help/FAQs

Which bronze?

This topic has 10 replies, 6 voices, and was last updated 19 June 2024 at 17:41 by Chris V.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
18 June 2024 at 11:02 #736641
Chris V
Participant
@chrisv
Good morning,
Hoping you can help with this,

Phosphor bronze PB102

Or

Colphos

I’m looking to order a couple of PMR fittings, a valve & tee. Also some round & hex bar material.

Out of the two above bronze options which appears more coppery in colour, ie would best match the cast bronze of the PMR valve?

OR, are both of the above nearer the colour of brass?
Advert

18 June 2024 at 12:01 #736644
bernard towers
Participant
@bernardtowers37738
Colphos is more of a copper color than PB102
18 June 2024 at 12:03 #736648
Dave Wootton
Participant
@davewootton
Strangely have just been using both materials to make some bearings and a small part for a blowdown valve. The Colphos I have is much more coppery in colour to the PB102. Both materials supplied by M-Machine.

Dave

Must learn to type faster!
18 June 2024 at 12:07 #736650
JA
Participant
@ja
I don’t think it matters too much as far as properties as long as you stay away from Aluminium and Manganese Bronze. Colphos 90 is nice to use and is a dark reddy brown in clour. Both round and hexagonal bar are available from M-Machine (just a happy customer).

JA

Bernard & Dave beat me to the answer (and we agreed!).
18 June 2024 at 12:56 #736660
Chris V
Participant
@chrisv
Thank you very much for your prompt replies! Its great you all agree…polar opposite to the answer from my supplier.

No problem though, I will try M-Machine (-:

Thanks again!

Chris.
18 June 2024 at 13:14 #736662
JasonB
Moderator
@jasonb
Colphos for me as it machines nicely.

I have some PMR cast pipe fittings here and can’t see much of a difference in colour between the two
18 June 2024 at 13:59 #736669
Chris V
Participant
@chrisv
Thanks Jason, Colphos is the way I shall go . Also sending you a PM.
18 June 2024 at 18:18 #736695
Dalboy
Participant
@dalboy
I turned a gear for the Farm Boy from PB102 THIS is the colour it came out
19 June 2024 at 14:42 #736863
Chris V
Participant
@chrisv
Thanks Dalboy.

Courious as to why 1/2″ Hex does not appear to be available anywhere in Colphos 90?!
19 June 2024 at 15:00 #736864
JA
Participant
@ja
I am not sure but I think some Colphos 90 non-metric AF sizes are the same as Whitworth bolt head AF dimensions.

I have just bought two length to make steam fittings assuming that is the case. If not, I am not really worried. Some spanner will fit even if I have to make/modify one.

JA
19 June 2024 at 17:41 #736877
Chris V
Participant
@chrisv
Thanks JA, the available sizes seem to jump from 7/16″ to 3/4″ without much if anything inbetween.

Yes suppling to spanner sizes makes some sense of course, but not everything ends up needing a spanner!

Still rather puzzelled!

Chris.
Author

Posts