Unusual Antique Diamond Saw

Advert

New Replies

Report Bug

Help/FAQs

Unusual Antique Diamond Saw

This topic has 7 replies, 4 voices, and was last updated 10 January 2024 at 09:54 by vic newey.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
8 January 2024 at 18:17 #705801
Martin King 2
Participant
@martinking2
Hi All,

I have been having fun fixing this lovely antique diamond cutting saw which is now almost done; just needs two new brass dop holders for the business end as they are missing.

It was in a terrible state when I got it!

It comes with a large number of new unused copper saw blades that are impregnated with diamond dust, as can be seen the one in the machine is damaged. There is a belt pulley integral to the shaft and this should run around 3000 rpm apparently yet he shaft just sits in plain carbon vee grooved “bearings”?

Here is a demo image i found showing the set up and the parts I have yet to make:

I cannot quite understand how the saw edge stands up to use without buckling as it is incredibly flimsy and super thin?

Any thoughts welcome.

Cheers, Martin
Advert

8 January 2024 at 18:33 #705804
Michael Gilligan
Participant
@michaelgilligan61133
I have one of those, Martin … in less good condition than yours, and [like so many things] awaiting restoration.

They were typically used in long banks of machines, driven from overhead line-shafting.

The discs don’t buckle because they are only very lightly loaded … the ball almost renders the arm and clamp ‘weightless’

MichaelG.

.

Edited to clarify teminology
8 January 2024 at 18:35 #705805
Chris Mate
Participant
@chrismate31303
If you refer to the blade itself, I would imagine it has to do with the speed its turning & ball ballance.
8 January 2024 at 18:45 #705807
Michael Gilligan
Participant
@michaelgilligan61133
Not quite an instruction manual, but this is a good place to look:

https://www.gemsociety.org/article/diamond-cutting-for-hobbyists-getting-started/

MichaelG.

.

Also: https://www.capetowndiamondmuseum.org/about-diamonds/diamond-cutting-and-polishing/
8 January 2024 at 18:59 #705819
Michael Gilligan
Participant
@michaelgilligan61133
Modern equivalent in use, in India:

https://www.alamy.com/stock-photo-diamond-cutting-and-polishing-factory-india-ana-85195-43176972.html?imageid=BCF6396D-B6CD-4995-9BA3-8D36DEB76087&p=148099&pn=1&searchId=ac864ef654406410137de4f4b3253cb6&searchtype=0

MichaelG.
8 January 2024 at 20:08 #705848
Martin King 2
Participant
@martinking2
Michael,

As always, a mine of information, many thanks!

You are correct about the ball, I have been playing with it; its a bit like a grown up vinyl record stylus balance!

Here is a pic of all the kit:

Cheers, Martin
8 January 2024 at 20:32 #705854
Michael Gilligan
Participant
@michaelgilligan61133
O.K. … I’m envious !

🙂

MichaelG.
10 January 2024 at 09:54 #706078
vic newey
Participant
@vicnewey60017
I’m joining the envious club as well
Author

Posts