removing staining

removing staining

This topic has 3 replies, 3 voices, and was last updated 15 December 2023 at 16:14 by paul rayner.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
14 December 2023 at 14:41 #699301
paul rayner
Participant
@paulrayner36054
Hello All

Has anybody got any tips on removing staining on a machine vice. I have recently acquired one previously used with flood coolant, Then stored under a bench, consequently it was very sticky with gummy oil residue, once I stripped it down and cleaned it all off it works flawlessly, But Is spoiled with all the spots of stain, I know it’s only cosmetic but it would be nice if they could be removed easily without removing metal. Any ideas?

thanks in advance for all replies

regards

Paul
Advert

14 December 2023 at 15:56 #699324
roy entwistle
Participant
@royentwistle24699
Scotchbrite, oil and elbow grease

Roy
14 December 2023 at 23:35 #699385
John Doe 2
Participant
@johndoe2
Would a chelating agent work ?

You can get it in gel form, apparently.
15 December 2023 at 16:14 #699496
paul rayner
Participant
@paulrayner36054
Thanks for replies, Been in the workshop all day today and took Roy’s advice. Started with the white one’s which were too gentle. So I switched to the maroon one’s they gave an excellent result. There is just 2 small places where there was a little pitting under the moving jaw. But I’m very happy with the result, hard work but great result. So Thank you Roy great tip.

regards

Paul
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 5
- 8
- 6 February 2025 at 18:20
  Michael Gilligan
- Solid Edge – Spring Designer – Help! 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 7
- 28
- 6 February 2025 at 17:51
  SillyOldDuffer
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 3
- 4
- 6 February 2025 at 17:06
  zymurgy2289
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 6 February 2025 at 16:57
  Andrew Tinsley
- Lidl spray aerosol items 1 2
  Started by: Bootlegger Blacky in: Hints And Tips for model engineers
- 20
- 26
- 6 February 2025 at 16:53
  Mick B1
- What Do These Mean; Why So Many Loop Errors? (Alibre Atom)
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 3
- 5
- 6 February 2025 at 16:37
  David Jupp
- Totally unacceptable treatment 1 2
  Started by: Me. in: General Questions
- 14
- 28
- 6 February 2025 at 15:49
  John Hinkley
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 21
- 28
- 6 February 2025 at 13:48
  Tony Pratt 1
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 25
- 6 February 2025 at 13:14
  JasonB
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 10
- 15
- 6 February 2025 at 12:40
  parovoz
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 79
- 6 February 2025 at 11:36
  SillyOldDuffer
- The most difficult project?
  Started by: Tony Martyr in: Stationary engines
- 5
- 15
- 6 February 2025 at 11:25
  Chris Gunn
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 334
- 6 February 2025 at 10:55
  Brian Abbott
- Parting off – Left over nib
  Started by: Blue Heeler in: Workshop Techniques
- 6
- 7
- 6 February 2025 at 09:50
  Nigel Graham 2
- Small butane torch refilling.
  Started by: YouraT in: Workshop Tools and Tooling
- 13
- 19
- 6 February 2025 at 08:21
  Nicholas Farr
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 1
- 1
- 6 February 2025 at 07:17
  David Senior
- CNC mill on its stand
  Started by: Dave S in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 2
- 6 February 2025 at 06:54
  JasonB
- shopmade single flute end mill
  Started by: celso ari schlichting in: General Questions
- 4
- 4
- 6 February 2025 at 06:34
  Diogenes
- Pittler spiral cutting test
  Started by: vic newey in: Workshop Techniques
- 9
- 21
- 5 February 2025 at 20:16
  vic newey
- Pennsylvania A3 Switcher 1 2 3
  Started by: Mark Elen 1 in: Work In Progress and completed items
- 18
- 58
- 4 February 2025 at 17:52
  Mark Elen 1
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 6
- 24
- 4 February 2025 at 17:50
  David George 1
- The wonders of AI… 1 2
  Started by: Robin Graham in: The Tea Room
- 15
- 42
- 4 February 2025 at 15:42
  Russell Eberhardt
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 10
- 13
- 4 February 2025 at 15:21
  Nicholas Farr
- Email messages on the Forum.
  Started by: Andrew Tinsley in: General Questions
- 3
- 8
- 4 February 2025 at 14:38
  David Jupp
- Myford Topslide base casting graduations
  Started by: Martin Kyte in: Workshop Tools and Tooling
- 8
- 19
- 4 February 2025 at 11:11
  Martin Kyte

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies