Hi dochaliday, although it looks like the two full size plans are lost, A4 pages 1 to 8 can be found here https://www.model-engineer.co.uk/796/free-plan-a-clutch-for-the-ml7-lathe/

You should be able to download and print them and these pages will slightly overlap, and can be trimmed and glued together to make the full size plans. You will have to scroll down to the bottom to find them.

Regards Nick.

On 19 November 2023 at 07:18 Nicholas Farr Said:

…it looks like the two full size plans are lost

TIG weld the parts together

The PDFs are much nicer !

Thanks for pointing that out.

For some reason, the stitched-together images did not upload at full (best) size.

Each single page pdf arrives in Irfanview as 793 x 1123 pixels. There is some overlap on the pages, but the stitched together images on my computer are each roughly 3000 x 1123, so no worse resolution than the single page pdfs.

If you know of a way to put the full image into a post (or a pdf, which I made at A2 paper size), I would be glad to know.

Thanks.

Hi Doc, I have a full set of MEW including all the pull out drawings ! I have just checked and could copy the drawings you need and post to you if that’s any help – I’m not clever like the other fellows with scanners and all this modern kit. Noel.