M E Threaded Hex Bolts

M E Threaded Hex Bolts

This topic has 5 replies, 5 voices, and was last updated 9 April 2010 at 10:57 by Circlip.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
8 April 2010 at 21:43 #50534
Speedy Builder5
Participant
@speedybuilder5
I am looking for a supplier of 1/8 inch x 40 tpi hex steel bolts (M.E) – Any ideas please.
Advert

8 April 2010 at 21:43 #5026
Speedy Builder5
Participant
@speedybuilder5
8 April 2010 at 21:56 #50537
Sub Mandrel
Participant
@submandrel
Might not be the answer you want, but can you not use 5BA, which is 0.126″ diameter?

I use them for 1 1/2″ screws at 1/12 scale.

Neil

Edited By Stub Mandrel on 08/04/2010 21:58:22
8 April 2010 at 23:20 #50538
thomas oliver 2
Participant
@thomasoliver2
I have checked all the usual suppliers and they all appear to stock only BA hex.headed screws. Personally, I have never seen ME screws advertised. A 5BA screw has 3/16in across the flats hexagon head. This is obtainable in steel and brass of course, so you may have to resort to making your own, or as suggested, use 5BA screws. T.O
9 April 2010 at 02:11 #50540
Ian S C
Participant
@iansc
1/8″ x 40tpi is also standard whitworth standard, have you thought of 3mm ? Ian S C
9 April 2010 at 10:57 #50546
Circlip
Participant
@circlip
If GLR still supply Hex rod, you COULD roll your own.

Regards Ian
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Myford S7 VFD problem 1 2
  Started by: Glyn Davies in: Manual machine tools
- 18
- 28
- 31 January 2025 at 08:34
  derek hall 1
- Christmas comes early !!
  Started by: Michael Gilligan in: The Tea Room
- 5
- 6
- 31 January 2025 at 07:44
  Michael Gilligan
- Had Another Go 1 2 … 13 14
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 341
- 31 January 2025 at 07:37
  JasonB
- not so ‘run of the mill’?
  Started by: An Other in: Model Engineer.
- 4
- 6
- 31 January 2025 at 06:55
  JasonB
- What Did You Do Today 2025 1 2
  Started by: JasonB in: The Tea Room
- 18
- 37
- 31 January 2025 at 06:48
  derek hall 1
- battery charger
  Started by: duncan webster 1 in: Electronics in the Workshop
- 13
- 23
- 30 January 2025 at 23:58
  Vic
- OKMO Microcosm JO6B Miniature Stirling Engine
  Started by: Blue Heeler in: Miscellaneous models
- 1
- 1
- 30 January 2025 at 22:18
  Blue Heeler
- Drawing Standards 1 2
  Started by: John Stevenson 1 in: CAD – Technical drawing & design
- 22
- 33
- 30 January 2025 at 22:04
  HOWARDT
- Camel back straight edge
  Started by: me1 in: General Questions
- 12
- 23
- 30 January 2025 at 21:52
  peak4
- Early Myford Super-7B gear change wheels??
  Started by: flatline in: Beginners questions
- 7
- 16
- 30 January 2025 at 21:11
  flatline
- CAD – Target Enigma 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 67
- 30 January 2025 at 21:05
  Ian P
- The wonders of AI…
  Started by: Robin Graham in: The Tea Room
- 6
- 7
- 30 January 2025 at 20:45
  JohnF
- 16-Channel Analog Multiplexer Demultiplexer
  Started by: Michael Gilligan in: Electronics in the Workshop
- 4
- 8
- 30 January 2025 at 20:35
  Bazyle
- Shades of black humour
  Started by: JimmieS in: The Tea Room
- 10
- 10
- 30 January 2025 at 18:25
  Harry Wilkes
- Using Schneider ATV12 with remote terminal VW3A1006.
  Started by: chrismac in: Workshop Tools and Tooling
- 4
- 11
- 30 January 2025 at 17:14
  David Jupp
- Mind-Boggling Numbers
  Started by: Michael Gilligan in: The Tea Room
- 5
- 9
- 30 January 2025 at 16:22
  jaCK Hobson
- For Sale Voltera V1 PCB machine
  Started by: Redpiperbob in: General Questions
- 3
- 3
- 30 January 2025 at 15:26
  JasonB
- Transistor Circuit to Operate Relay from Arduino Uno 1 2
  Started by: James Alford in: Electronics in the Workshop
- 11
- 40
- 30 January 2025 at 13:38
  John Haine
- Fixing boiler cleading to firebox
  Started by: Peter Venn in: General Questions
- 6
- 6
- 30 January 2025 at 12:57
  duncan webster 1
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 108
- 30 January 2025 at 11:43
  Graham Meek
- Wicking felt for lathe headstock bearings
  Started by: YouraT in: Manual machine tools
- 10
- 25
- 30 January 2025 at 02:54
  Michael Gilligan
- building milling machine made from scrap part 1
  Started by: celso ari schlichting in: General Questions
- 1
- 6
- 29 January 2025 at 21:50
  celso ari schlichting
- Press Fit 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 18
- 26
- 29 January 2025 at 20:25
  Peter Simpson 3
- Pressure washer?
  Started by: Frank Gorse in: General Questions
- 10
- 19
- 29 January 2025 at 20:17
  Frank Gorse
- Stanley knives 1 2
  Started by: old fool in: The Tea Room
- 22
- 35
- 29 January 2025 at 19:51
  Robert Atkinson 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies