Sandown Model Engineer Exhibition 2009

Advert

New Replies

Report Bug

Help/FAQs

Sandown Model Engineer Exhibition 2009

This topic has 32 replies, 24 voices, and was last updated 7 January 2010 at 11:02 by Geoff Sheppard.

Viewing 25 posts - 1 through 25 (of 33 total)

1 2 →

Author

Posts
7 December 2009 at 18:22 #45981
David Clark 13
Participant
@davidclark13
Hi There

I shall be driving down to the Exhibition on Wednesday morning.

No emails or posts to me will be answered before Tuesday the 15th.

I hope to see some of you there.

Who is going to visit the Exhibition?

regards David
Advert

7 December 2009 at 18:22 #4379
David Clark 13
Participant
@davidclark13
7 December 2009 at 18:36 #45982
chris stephens
Participant
@chrisstephens63393
” Me, Sir, Me!” Waving hand in the air enthusiasticly.
7 December 2009 at 18:45 #45984
Martin W
Participant
@martinw
Me too with a bit of luck, a following wind and, of course, permission from her indoors.
7 December 2009 at 18:54 #45985
mgj
Participant
@mgj
Yes,I’m going. Only to keep young Stephens in check of course.
7 December 2009 at 19:01 #45986
JasonB
Moderator
@jasonb
I hope to be there Friday
7 December 2009 at 20:41 #45987
Niloch
Participant
@niloch
‘Hope to be there Saturday barring bankruptcy, flood and pestilence!
7 December 2009 at 21:13 #45988
John Haine
Participant
@johnhaine32865
Friday.
8 December 2009 at 09:03 #46000
Duncan Armstrong 1
Participant
@duncanarmstrong1
Make sure you all come and say hi to us on the MyHobbyStore stand
8 December 2009 at 09:14 #46001
DMB
Participant
@dmb
Me 2! Got advance ticket, will go! Friday.
8 December 2009 at 09:27 #46004
bill Maskell
Participant
@billmaskell10781
Me too !!!! Friday. See you there !!!
8 December 2009 at 12:15 #46012
Circlip
Participant
@circlip
Don’t forget the “Bowlers” Stan and Ollie

Will be with you in thought, Would have even bought you a pint, to SHARE of course, WE don’t waste brass on Southern muck.

Edited By Circlip on 08/12/2009 12:17:33
8 December 2009 at 13:41 #46017
David Clark 13
Participant
@davidclark13
Hi There

Looks like being a good exhibition.

There are at least 30 Club stands (our website says 14) and 40 plus traders.

There is a boating pool, 3in. and 4in. scale traction engines in steam outside.

Anthony Mount is bringing some of his engines and will be next to the Polly stand.

There will be several of Neville Evans designs on display next to the Polly stand again.

Roddy Turner will be operating his model dragline excavator. (Roddy won the Duke of Edinburgh award last year.)

There will be plenty to see, it will be well worth the trip.

regards David

Edited By David Clark 1 on 08/12/2009 13:42:22
11 December 2009 at 15:56 #46121
David Clark 13
Participant
@davidclark13
Hi there

Almost 4pm and the result of the first day is absolutely fantastic.

raders are happy as there is a fantastic amount of people coming through the door. D

Don’t take my word for it, come and see for yourself.

regards David
11 December 2009 at 18:26 #46122
Paul Boscott
Participant
@paulboscott25817
I have just got back from the show I arrived at 10:30 Parking easy and free. There was a queue to get in but with my ticket walked straight in. I got most of my list of bits, but more interestingly met some of the show team and was able to tell the in person what a good job they had done to put it all together. I partially liked the show separation arrangements Competition models, Club stands and Traders. There is also a good size food area.

Paul Boscott
11 December 2009 at 19:23 #46124
martin leslie
Participant
@martinleslie67699
I got back an hour ago. Had a great time, spent far too much money buying my christmas presents. (Now have to wait to be able to open them)

Not too crowded so not at all stressfull.

Food made a change from the obligatory greasy burger.

Only one problem – came back with a longer want list than I went with.

(nothing new there then)

Martin
12 December 2009 at 13:27 #46136
Martin W
Participant
@martinw
Hi All

Went yesterday, Friday, it was a great show and much better than I had expected. It was a great day out and like Martin L spent far too much money having ordered a new mill from Warco coupled with other more minor purchases. Even my good lady enjoyed it, well she must have done to let me spend the money!!

Overall I rate it as one of the best this year with plenty to see and areas well laid out.

Thanks to the organisers.

Cheers

Martin W

Edited By Martin W on 12/12/2009 13:28:08
12 December 2009 at 15:04 #46138
mgj
Participant
@mgj
Was a great show. Thoroughly enjoyed it – and spent far too much money. well organised – congrats to David. Restaurant was good, – everything.

Met Stan and he signed me up for the SMEE and lent me a tangential tool. It would have been nice to have met Circlip -as long as he could have drunk it, I’d have bought him one, so he wouldn’t have had to worry about southern muck.

(Mind you, you never know what goes on north of Watford)

Really good.

BUT- compared with Ascot, getting to and from it is a nightmare. It took nearly an hour in the am, I arrived at near 1 o clock, to get in from the M25. And just under an hour, leaving a little early to get out out of the jamup and onto the M3. WGR, I can get up to the Midlands, just in the time I spent grinding along inside the M25.

Maybe I’m too used to our mostly uncluttered Dorset roads, and let myself get too stressed in prolonged traffic.

Edited By meyrick griffith-jones on 12/12/2009 15:06:36
12 December 2009 at 23:20 #46152
Steve Garnett
Participant
@stevegarnett62550
I don’t do shows like this too often, so I wasn’t quite sure what to expect – so I can’t make comparisons. But I went to this one on Friday (it’s only 15 minutes to get there for me), and was very impressed.

I didn’t spend a lot of money, but I certainly made myself a bit of a shopping list – just being able to look at some of the things I’d been contemplating was well worth it. It’s just a personal thing (although it wasn’t just me), but what made it really worthwhile was the SMEE’s demonstration of their homebrew EDM machinery, and being able to discuss the ins and outs of how they got to where they did. There’s definitely a MEW article in that if they’re up for it, I’d say.

So, excellent show, friendly people – well worth it. Congratulations to all involved.
13 December 2009 at 09:16 #46158
Niloch
Participant
@niloch
With the exception of the Harrogate show which is too far for me I’ve attended all the ME shows in the last three years or so. I couldn’t find fault with this one. Apart from a very inconsiderate, (selfish even) gentleman who parked his large Lexus very crookedly in the space next to mine!

Some superb models on show including the helpful Ms Killick on the Myhobbystore stand! Old enough to be her father, certainly not; I’m old enough to be her grandfather!!!
14 December 2009 at 19:19 #46202
Bill Dawes
Participant
@billdawes
Went to Sandown on Sat. 12th. This was my first visit to a MEX and was very impressed.

I live in Somerset but was worth the 140 mile trip. An absolute Alladins cave of bits and superb exhibits. Could have gone home with a truckful but had to make do with a set of Glanze turning tools (birthday presssie) My wife bless her came along too and she also enjoyed it, was particularly awe inspired with the Napier 12 cyl engine, an absolute masterpiece.

Felt sorry for the chap trying to get his jet engine going, did he in the end?

Bill D.
14 December 2009 at 19:31 #46204
V8Eng
Participant
@v8eng
Visited the show on 12th, to sum it up in one word: excellent!

I thought it well laid out with enough room to move about between stands, plus a good mix of trade stalls, and what a great display of models.

Well done.
14 December 2009 at 20:22 #46208
Bill Dawes
Participant
@billdawes
I do of course mean the 24 cylinder Napier.

Bill D.
14 December 2009 at 20:33 #46209
AndyB
Participant
@andyb47186
The wife and I went on Sunday; new to all this as the rank beginner!

Thank you all very much! Had a wonderful time, met so many interesting people who were happy to explain all the intricacies.

I have to say that there was a fantastic range of styles and types. I had expected to be overwhelmed by the experience and technical ability on display but was so pleased to see kit models on display along with everything else. Had a great chat about painting with a chap who had an E Boat kit model and I was able to compare notes on how I painted HMS Hood and how I am going to paint a U Boat model that I am waiting for time to start. The wife has placed an order for a traction engine but I think that she will have to wait a while longer!! Haha!

Will see you all next year! Hopefully with something of my own to display….but don’t hold your breath.
15 December 2009 at 10:58 #46224
Trevorh
Participant
@trevorh
I went on the Sunday – fairly quiet but that just mean’t I could get to the stands and ended up spending way too much, The models on show were of an amazing quality, even had chance to chat to a couple of the Traction engine bods. This was rally good for me as I am about to start a 3″ myself

excellent day all round
Author

Posts