Hello from New Hampshire, USA!

Advert

New Replies

Report Bug

Help/FAQs

Hello from New Hampshire, USA!

This topic has 5 replies, 3 voices, and was last updated 30 December 2022 at 02:39 by John Patton.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
4 December 2022 at 02:24 #623497
John Patton
Participant
@johnpatton13052
Hello everyone, NEW to this forum and thought I'd introduce myself! I'm an avid Model maker of Scale Model Trains as well as Scale Automobiles!

As doing this over the years, I've gotten myself 2 of the Unimat SL-1000 and the DB200! One is set up as a metal lathe, the other is set up as a Milling Machine & Drill Press… I've got a LOT of tooling with both these machines and enjoy working with them a LOT!

I'll be uploading pictures to an album as soon as I get the feel of how this forums works! ~John
Advert

4 December 2022 at 02:24 #41351
John Patton
Participant
@johnpatton13052
An avid Model maker….
4 December 2022 at 09:51 #623517
Thor 🇳🇴
Participant
@thor
Hi John,

Welcome to the forum. I only have one Unimat SL, part of it is now used to sharpen my endmills.

Thor
4 December 2022 at 15:38 #623576
John Patton
Participant
@johnpatton13052
Hi Thor,

Thanks for the Welcoming! I also have the ability to set up either of my 2 Unimats for sharpening of sorts maybe not to the way you have some it (as I've not seen) BUT I got the attachments to go about it with both my machines, I PLA to make a table attachment to go to either machine for this very purpose as I have time to do so! As I got a few other peiples I'm going to be making as well! Currently I got a 1/2 inch drill chuck that will fit either headstock or tailstock as a factory chuck would, with the M12x1.00 threads cut into the back of my drill chuck to hold half inch shanks with, drills reams etc

I've also made a tool holder that will hold a Dremel withthe tool post for slitting, and grinding and even cut-off and polishing work!

At some point I want to find a 3rd or "partial" Unimat to make the Lathe have a Mill overhanding the bedway like a Combination Lathe/Mill at some point I just need to get the headstock itself with motor to do so at this point!
13 December 2022 at 13:44 #624801
Daggers
Participant
@daggers
Welcome to the forum John.

you have a nice setup over there, how about some photos of your work or even better a few photos, posts of one of your builds.

All the best from Portsmouth “Old Hampshire”
30 December 2022 at 02:39 #626689
John Patton
Participant
@johnpatton13052
Hi Daggers from the Capitol!

Thanks for the welcome I got your message just bore the Holiday rush and it hit me like a runaway tug boat on the bay! LOL

Anyway, I'll see what all I got to post as theres quite a bit and I right now am kind of picking and choosing ya know? I've had both these Unimats for about 15 years now and have done a LOT with them both… SO I guess, some of the older projects now done, and some new ones I'm working on!?

As I mentioned, I do model moth model railroading as well as model car and trucks…. SO… I got a little bit in 2 different hobbies to post up!
Author

Posts