Hello from South Wales

Advert

New Replies

Report Bug

Help/FAQs

Hello from South Wales

This topic has 6 replies, 5 voices, and was last updated 20 June 2020 at 13:05 by stevetee.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
16 June 2020 at 22:07 #480357
Andy welburn
Participant
@andywelburn28777
Hello All. Andy here, based in South Wales not a million miles away from Swansea. I have an old Myford ML7 and an EMCO F1 mill. I'm currently amusing myself machining "Turners Cubes" from wood and trying to learn some machining and CAD/CAM skills.

Eventually I'd like to design and build a 250cc V twin motorcycle engine using a lot of old Honda CG125 parts, and then put it into a bike.

I'm considering upgrading the EMCO F1 to something with a bit more travel but not looking to spend too much.

Regards

Andy
Advert

16 June 2020 at 22:07 #40846
Andy welburn
Participant
@andywelburn28777
17 June 2020 at 09:58 #480427
Brian Wood
Participant
@brianwood45127
Welcome to the Forum Andy.

Perhaps you should graduate to machining metal on your machines, wood dust is a very poor lubricant and might actually make your ML7 even older with it's effect on the white metal bearings. I think it would pay you dividends to clean things thoroughly before you make that change.

Your project sounds ambitious, is this to make a road use bike? There are plenty of bike enthusiasts on the Forum who will I'm sure be happy to pass on their experience.

Regards Brian
17 June 2020 at 10:40 #480446
Neil Wyatt
Moderator
@neilwyatt
Hi Andy,

Welcome to the forum, I originally come from Barry myself

Neil
17 June 2020 at 16:45 #480532
colin brannigan
Participant
@colinbrannigan54160
Hello Andy, and welcome, I am also near Swansea in Southgate on the Gower and I also mess with motorcycles but old British stuff.

Colin
17 June 2020 at 23:14 #480612
Andy welburn
Participant
@andywelburn28777
Thanks for the welcomes chaps.

Brian – all my wood machining is done on the mill rather than the lathe and I ALWAYS have the vacuum cleaner on extracting dust as it's made. In fact I recently bought a new vacuum as my old "VAX" was starting to emit burning smells. I wouldn't say the new vacuum is good but so far I've had to retrieve a 13mm spanner and a big felt tip pen out of the drum, as well as plenty of sawdust and swarf.

Neil – I nearly bought a house in Barry but it fell through. Never mind.

Colin – I have a modern Triumph and an Indian Royal Enfield at the moment, as well as a CG125 and a Yamaha TY250. For some strange reason though I've developed a hankering for a British 250. I'm thinking along the lines of a Crusader, C15/Starfire or a Panther.

As for my fantasy (presently) engine project, I've got a couple of potential donor engines but I need to do a lot of sorting out and tidying up in the garage (and another bike build project) before I can make a proper start on it. I'll get there eventually! Lots of learning to do on the way.

Andy
20 June 2020 at 13:05 #481069
stevetee
Participant
@stevetee
Hi there, i'm further down the coast ger Abergwaun. Have you read about the Carberry Vee twin. The bloke developed a vee twin based in the Enfied India 500cc single engine, which could be of interest to you as a process.
Author

Posts