New Yorkshireman member

Advert

New Replies

Report Bug

Help/FAQs

New Yorkshireman member

This topic has 16 replies, 11 voices, and was last updated 7 May 2020 at 10:32 by Bazyle.

Viewing 17 posts - 1 through 17 (of 17 total)

Author

Posts
5 May 2020 at 19:26 #469424
Oliver Mallinson
Participant
@olivermallinson93531
Hi all

Just signed up today. Il have a good look around and listen to plenty of sound advice. Bought my first lathe this week and I’m sure help and advice will be found here. Wanted one for ages. Finally got sick of shaping things in the pillar drill. Going to get it set up this weekend seems as there’s naff all else to do. Needs a few bits sorting on it and a bit of love and tlc but nothing I can’t sort. I do fibre glass as a trade but grew up on a farm so I’m always tinkering and building things. Hence the ever expanding workshop. I know there a lot learn working the lathe but I’m quite patient and don’t mind spending the time.

cheers

Olly
Advert

5 May 2020 at 19:26 #40800
Oliver Mallinson
Participant
@olivermallinson93531
5 May 2020 at 20:01 #469428
Stuart McPherson
Participant
@stuartmcpherson53481
Hi Olly

Welcome from another adopted Yorkshireman, as you can see I hale from Scotland initially. You will have a host of help on this site and I hope you enjoy making what ever.

Regards

Stuart
5 May 2020 at 20:04 #469430
Stuart McPherson
Participant
@stuartmcpherson53481
Hi Olly

Welcome from another adopted Yorkshireman, as you can see I hale from Scotland initially. You will have a host of help on this site and I hope you enjoy making what ever.

Regards

Stuart
5 May 2020 at 20:06 #469431
Phil Whitley
Participant
@philwhitley94135
Eyup Olly, and welcome to't forum. I am a Wessy, but have lived in East Yorkshire since the sixties. I am near Bridlington, where are you?

Phil
5 May 2020 at 20:48 #469439
Neil Wyatt
Moderator
@neilwyatt
Welcome to the forum Olly.

Neil
5 May 2020 at 21:39 #469449
Steviegtr
Participant
@steviegtr
Welcome Olly from another Yorkshireman. What lathe did you get.

Steve.
6 May 2020 at 06:35 #469480
Oliver Mallinson
Participant
@olivermallinson93531
Thanx for the welcome.
I’m from hemsworth. Just outside of Barnsley.

I managed to get a Chester crusader. It’s 9 years old. Came from a college and was used for training. Hence the need for a bit of tlc. Picked it up for a very reasonable price so I don’t mind doing work to it. Does anyone know where i can buy a manual for it and a parts list??
Also what’s the difference between the standard one and the deluxe one?? Is it a free key ring with a purchase?
Should be a nice project in itself restoring it back to full glory. Hardest part is going to be getting it in the garage with out the wife seeing it and asking where did that come from and why do I need it.

olly
6 May 2020 at 07:28 #469486
Plasma
Participant
@plasma
Hi Olly,

I am in wombwell, tother side of Barnsley.

I have ex training Boxford lathes so cant help with the Chester. But you should be able to get a manual either electronic version or paper. Especially as it's a relatively new machine.

If you need anything turning to get your machine is up and running give me a shout.

I'm a self taught tinkerer not an engineer but I will tackle most things.

Just rebuilt a garden tractor and made lots of replacement parts for it.

See thi after't lock darn.

Mick
6 May 2020 at 07:33 #469489
Plasma
Participant
@plasma
This is Fred, my Wheelhorse C-125 tractor, rebuilt from a virtual scraper.
6 May 2020 at 08:21 #469500
AdrianR
Participant
@adrianr18614
Hi Oli,

You can download the manual from Chester

This is the product page **LINK**

This is the download link from that page **LINK**

For some reason the Crusader manual comes up as the Deluxe.

It could be worth doing some googling to see if Grizzly sold the same lathe. I have a Warco version of the Chester Craftsman and the Grizzly manual is much better.

Adrian
6 May 2020 at 08:42 #469501
John Coates
Participant
@johncoates48577
Welcome fellow man blessed by birth

I was Yorkshire born (Goole) but am now a Yellowbelly (Lincolnshire)

Welcome to a hobby that will prove more expensive than several mistresses!

At least your tea drinking ability will not doubt have been finely honed over the years

All the best

John
6 May 2020 at 12:14 #469557
Oliver Mallinson
Participant
@olivermallinson93531
Thanx for all the help and advice there lads. Really appreciate it. Yea my tea drinking is on point.. Only Yorkshire tea will do. How do you post pictures up on here. I’m only using my iPhone. I don’t actually own a computer.
cheers

olly
6 May 2020 at 13:22 #469576
mechman48
Participant
@mechman48
Welcome Olly, Born in Leicester myself but lived up 'ere in Yorkshire for the past 70 years so can claim 'honorary title 'Tyke' look forward to seeing your contributions & pics in the future.

George.
6 May 2020 at 20:38 #469644
Oliver Mallinson
Participant
@olivermallinson93531
Printed off the manual thank you. Also managed to find the DRO manual and printed that off. Office lady wasn’t too happy as it was 130 pages long. Actually got the lathe in the garage tonight with the use of the engine crane and truck. Ended up using the winch on the pick up and a snatch block at the back of the garage to drag it In. Didn’t realise they are so heavy. Looking forward to having a wee go. It will be something different. I’m pretty handy with a TIG welder which is what I normally tinker with. Can build radiators and pipes and fuel tanks steel,S/Steel or ally and crap like that So if any one needs a hand with stuff or a bit doing then give me a shout. I usually work for favours, knowledge or beer. Best way in this world. Also good with Diesel engines if anyone’s stuck. Rebuild, tuning and that.
olly
7 May 2020 at 09:41 #469743
Arthur Sixsmith
Participant
@arthursixsmith43623
Hayup Olly Iam quite close in South Elmsall. Dont post much on hear not a engineer so not much to add. After all this is over we will have a natter and cupa, Keep safe Arthur
7 May 2020 at 10:32 #469764
Bazyle
Participant
@bazyle
Stuff lathes, now I want a 'Fred' Anyway welcome Olly. half my family are from Bradford but all passed now. Don't forget eh parkin with your tea.
Author

Posts