Be gentle with me!!!!!!!

Be gentle with me!!!!!!!

This topic has 5 replies, 5 voices, and was last updated 18 December 2019 at 19:44 by JohnF.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
28 November 2019 at 04:14 #439153
Derek Grant
Participant
@derekgrant67792
My retirement present to me was a tired Myford Super7 which has given me hours of fun over the last few years.A repeating job is now driving me to investigate a big bore conversion. Any help, contact details or helpful comments would be greatly appreciated. Thank you. Derek Grant
Advert

28 November 2019 at 04:14 #40665
Derek Grant
Participant
@derekgrant67792
28 November 2019 at 07:50 #439165
Chris Evans 6
Participant
@chrisevans6
Welcome along Derek, I am not a Myford user but someone will be along soon to advise.
28 November 2019 at 07:55 #439168
Hopper
Participant
@hopper
Any chance of using a fixed steady to spin larger diameter jobs in the S7? Or is the job too long. (Let me guess, motorcycle fork tubes?)
18 December 2019 at 16:11 #442242
Neil Wyatt
Moderator
@neilwyatt
Welcome to the Forum, Derek.

I think there are two main challenges – disassembly, as things can get stuck, and setting up to get everything running smoothly.

Neil
18 December 2019 at 19:44 #442289
JohnF
Participant
@johnf59703
Derek, I believe Myford [Nottingham] were asked if this was possible and they said it was not but !! my guess is sooner or later someone will come up with a conversion — maybe ?

However there is a post on this forum **LINK** you may find interesting.

John
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- No logging in to classifieds
  Started by: Bob Worsley in: New Forum Software questions, comments and Test Threads
- 1
- 1
- 28 February 2025 at 09:27
  Bob Worsley
- Centec 2B Mill Table—Surface Grind or Scrape?
  Started by: Graham Horne 2 in: Manual machine tools
- 5
- 5
- 28 February 2025 at 09:05
  DC31k
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 12
- 21
- 28 February 2025 at 08:45
  Michael Gilligan
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 14
- 23
- 28 February 2025 at 08:21
  SillyOldDuffer
- Points, Turnouts for French readers
  Started by: Speedy Builder5 in: Locomotives
- 1
- 1
- 28 February 2025 at 08:12
  Speedy Builder5
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 15
- 20
- 28 February 2025 at 08:04
  Robert Atkinson 2
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 288
- 27 February 2025 at 23:35
  duncan webster 1
- Vickers Inverted Engine 1 2
  Started by: JasonB in: Stationary engines
- 10
- 39
- 27 February 2025 at 22:27
  Nigel Graham 2
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 6
- 7
- 27 February 2025 at 22:10
  Tony Rowe 1
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 8
- 9
- 27 February 2025 at 21:38
  Nigel Graham 2
- Ford Transit
  Started by: Vic in: The Tea Room
- 2
- 2
- 27 February 2025 at 21:33
  Nigel Graham 2
- Scam – Close but no Cigar!
  Started by: Chris Crew in: The Tea Room
- 8
- 9
- 27 February 2025 at 21:29
  Nigel Graham 2
- What steel
  Started by: Peter Simpson 3 in: Beginners questions
- 6
- 9
- 27 February 2025 at 20:58
  JasonB
- Source for trangular carbide inserts.
  Started by: Andrew Tinsley in: General Questions
- 9
- 15
- 27 February 2025 at 20:40
  JasonB
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 6
- 7
- 27 February 2025 at 18:23
  Robert Atkinson 2
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 14
- 20
- 27 February 2025 at 16:34
  Oldiron
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 5
- 27 February 2025 at 09:06
  michael howarth 1
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 8
- 27 February 2025 at 06:56
  Plasma
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 39
- 26 February 2025 at 20:33
  Fulmen
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 7
- 26 February 2025 at 20:32
  celso ari schlichting
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 67
- 26 February 2025 at 18:41
  JasonB
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 4
- 4
- 26 February 2025 at 18:21
  Dave S
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 35
- 26 February 2025 at 18:14
  bernard towers
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 5
- 9
- 26 February 2025 at 17:30
  robin coleman
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies