Hi from North Lincolnshire

Hi from North Lincolnshire

This topic has 4 replies, 4 voices, and was last updated 9 February 2019 at 21:41 by Andy Carruthers.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
9 February 2019 at 16:33 #395462
Philip Slater
Participant
@philipslater86297
Just before retiring 4 years ago I purchased my Myford Super 7 and slowly I've found more and more use for the lathe having purchased a part built 3 1/2" gauge live steam locomotive a year or so back. I've now built up a Tom Senior milling machine and hope this will come in useful as I get more into model engineering.
Advert

9 February 2019 at 16:33 #40489
Philip Slater
Participant
@philipslater86297
9 February 2019 at 17:54 #395474
Brian H
Participant
@brianh50089
Hello Philip and welcome from a fellow model engineer near Mansfield, Nottinghamshire. What design is your loco?

If you have any questions you will be sure to get answers on here.

Brian
9 February 2019 at 18:59 #395489
Neil Wyatt
Moderator
@neilwyatt
Hello Phil,

Welcome to the forum,

Neil
9 February 2019 at 21:41 #395512
Andy Carruthers
Participant
@andycarruthers33275
Hi Philip, welcome – I'm near Scunthorpe and have a Tom Senior M1 to which I recently added a DRO and speed sensor, slowly learning to use my lathe and mill, hopefully the shaper soon too
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 5
- 6
- 27 February 2025 at 05:17
  Alan Charleston
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 9
- 12
- 26 February 2025 at 23:20
  jim1956
- What steel
  Started by: Peter Simpson 3 in: Beginners questions
- 4
- 5
- 26 February 2025 at 21:33
  Fulmen
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 39
- 26 February 2025 at 20:33
  Fulmen
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 7
- 26 February 2025 at 20:32
  celso ari schlichting
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 3
- 4
- 26 February 2025 at 20:08
  duncan webster 1
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 67
- 26 February 2025 at 18:41
  JasonB
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 4
- 4
- 26 February 2025 at 18:21
  Dave S
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 35
- 26 February 2025 at 18:14
  bernard towers
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 5
- 9
- 26 February 2025 at 17:30
  robin coleman
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 12
- 13
- 26 February 2025 at 17:13
  Vic
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 5
- 7
- 26 February 2025 at 17:12
  Mark P.
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 286
- 26 February 2025 at 16:14
  Michael Gilligan
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 2
- 2
- 26 February 2025 at 16:00
  noel shelley
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 2
- 26 February 2025 at 13:18
  Peter Cook 6
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 2
- 2
- 26 February 2025 at 12:32
  howardb
- New Member Paul
  Started by: paul richardson 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 26 February 2025 at 12:13
  JasonB
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 7
- 26 February 2025 at 11:12
  Peter Cook 6
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD!
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 9
- 24
- 26 February 2025 at 10:58
  Nicholas Farr
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 10
- 23
- 26 February 2025 at 09:36
  rjenkinsgb
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 13
- 31
- 26 February 2025 at 09:12
  Michael Gilligan
- Metal spinning a deep cup
  Started by: Oily Rag in: Workshop Techniques
- 13
- 15
- 26 February 2025 at 08:58
  Trevor Drabble 1
- Harrison Milling Machines
  Started by: MARK RIGG in: Manual machine tools
- 3
- 5
- 25 February 2025 at 20:41
  Chris Crew
- Centec 2B fast traverse ideas
  Started by: Graham Horne 2 in: Manual machine tools
- 8
- 9
- 25 February 2025 at 19:41
  peak4

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies