Hej from Uppsala, Sweden

Hej from Uppsala, Sweden

This topic has 5 replies, 5 voices, and was last updated 7 February 2019 at 10:02 by Neil Wyatt.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
5 February 2019 at 21:17 #40487
Piotr
Participant
@piotr
Advert

5 February 2019 at 21:17 #394869
Piotr
Participant
@piotr
Hello all!

I had dreamed about having a metal shop for many years, but it wasn't until 2016 when my wife and I finally bought a house and I could start one. My workshop is pretty small and is a mix of fairly new far east machines as well as vintage machinery from Sweden and Germany.

I got a small bench lathe and a mill from SIEG, a Deckel pantograph engraver/mill, a small surface grinder and finally, what's probably my favourite, a large Swedish made shaping machine.

I've been a forum member for quite a while, but only reading really and it's not going to change any time soon. I really like model engines and while steam is what I eventually want to play with, for now I am happy with stirling and vacuum engines. To make them I often need to build the tools first. I either can't or don't want to buy them and then I spend more time making tools than the actual project
6 February 2019 at 07:32 #394908
David George 1
Participant
@davidgeorge1
Welcome Piotr. It sounds like you have an interesting workshop, there are plenty of like minded people on here, just ask if you need any help.

David
6 February 2019 at 07:55 #394913
Brian H
Participant
@brianh50089
Welcome Piotr, as David says, just ask if you need help.
6 February 2019 at 15:17 #395002
Jan B
Participant
@janb
Hej Piotr,

Welcome, nice to hear from another Swedish model engineer. Unfortunately we are not so many, but hopefully it will change in the future.

Jan
7 February 2019 at 10:02 #395119
Neil Wyatt
Moderator
@neilwyatt
Welcome to the forum, Piotr,

Neil
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 5
- 6
- 27 February 2025 at 05:17
  Alan Charleston
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 9
- 12
- 26 February 2025 at 23:20
  jim1956
- What steel
  Started by: Peter Simpson 3 in: Beginners questions
- 4
- 5
- 26 February 2025 at 21:33
  Fulmen
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 39
- 26 February 2025 at 20:33
  Fulmen
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 7
- 26 February 2025 at 20:32
  celso ari schlichting
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 3
- 4
- 26 February 2025 at 20:08
  duncan webster 1
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 67
- 26 February 2025 at 18:41
  JasonB
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 4
- 4
- 26 February 2025 at 18:21
  Dave S
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 35
- 26 February 2025 at 18:14
  bernard towers
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 5
- 9
- 26 February 2025 at 17:30
  robin coleman
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 12
- 13
- 26 February 2025 at 17:13
  Vic
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 5
- 7
- 26 February 2025 at 17:12
  Mark P.
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 286
- 26 February 2025 at 16:14
  Michael Gilligan
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 2
- 2
- 26 February 2025 at 16:00
  noel shelley
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 2
- 26 February 2025 at 13:18
  Peter Cook 6
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 2
- 2
- 26 February 2025 at 12:32
  howardb
- New Member Paul
  Started by: paul richardson 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 26 February 2025 at 12:13
  JasonB
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 7
- 26 February 2025 at 11:12
  Peter Cook 6
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD!
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 9
- 24
- 26 February 2025 at 10:58
  Nicholas Farr
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 10
- 23
- 26 February 2025 at 09:36
  rjenkinsgb
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 13
- 31
- 26 February 2025 at 09:12
  Michael Gilligan
- Metal spinning a deep cup
  Started by: Oily Rag in: Workshop Techniques
- 13
- 15
- 26 February 2025 at 08:58
  Trevor Drabble 1
- Harrison Milling Machines
  Started by: MARK RIGG in: Manual machine tools
- 3
- 5
- 25 February 2025 at 20:41
  Chris Crew
- Centec 2B fast traverse ideas
  Started by: Graham Horne 2 in: Manual machine tools
- 8
- 9
- 25 February 2025 at 19:41
  peak4

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies