2022 Stevenson Trophy Competition

Advert

New Replies

Report Bug

Help/FAQs

2022 Stevenson Trophy Competition

This topic has 14 replies, 8 voices, and was last updated 28 October 2022 at 13:24 by Michael Gilligan.

Viewing 15 posts - 1 through 15 (of 15 total)

Author

Posts
19 July 2022 at 11:56 #39787
Neil Wyatt
Moderator
@neilwyatt
Now Open for Entries.
Advert

19 July 2022 at 11:56 #606423
Neil Wyatt
Moderator
@neilwyatt
The John Stevenson Trophy 2022

Many readers and forum members will remember John Stevenson, a contributor to MEW but best known for his larger-than life presence on the Model Engineer forum.

Funded by many donations in his memory, the Stevenson Cup was first awarded in 2018. The cup is engraved “John Stevenson, 1948 – 2017, Remembered by his many friends” with “Awarded for Excellence in Practical and Useful Workshop Equipment” on the plinth.

The John Stevenson Trophy is presented for just that, a well-made and usable piece of tooling, a modification to a machine or an accessory for a tool where the fact it works well is more important than making it look good. Unlike traditional judged trophies, we decided on a different approach to reflect John’s reticence about traditional competitions. After a call for nominations, a small panel of judges selected a shortlist, on which there was an online vote.

Due to the disruption caused by Covid 19, the 2020 competition was greatly disrupted, and the competition did not run in 2021. The 2020 winner was Ian Johnson with his quick-change milling machine chuck.

We have decided to once again make the competition open to all. Any reader or forum member may enter their own work.

A short list will then be prepared by the organisers, so that award of the cup can be judged by a popular vote. Voting will be via a poll on the forum and open to all.

The winner will be announced online and in the magazine.

To enter, just send four good photographs of your entry with up to (about) 500 words of description by email to meweditor@mortons.co.uk no later than 31 August 2022.

Edited By JasonB on 06/08/2022 19:04:56
19 July 2022 at 11:57 #606424
Neil Wyatt
Moderator
@neilwyatt
Naturally, have to have some formal rules for the competition, these are:

All entries must be a piece of practical workshop equipment i.e. a tool, jig, fixture or a modification to or accessory for an existing piece of equipment. One entry per person.

All entries to the competition must be materially your own work (commercial parts etc. are allowable but please be clear about what these are) and not have been entered to the competition before.

A short list of entries will be selected by the competition organisers, a group of people who knew John and are familiar with his views on workshop equipment.

Criteria for inclusion on the shortlist will be that the tooling is practical and capable of being used for accurate work in a home workshop setting. It should demonstrate ingenuity, good design, economical use of materials and be appropriately finished for its function.

By entering you confirm your permission to feature the entry in the magazines or on the forum. If practical, you may be invited to display your entry at a model engineering exhibition in the future.

The winner will be selected by a popular online vote by forum members. Readers who join the forum in order to vote will be allowed to do so. Voting will be strictly one vote per person.

In the event that the judges consider invalid votes have been cast or that an attempt has been made to unduly influence the result of the vote any questionable votes will be disregarded, or entries may be disqualified.

The trophy will remain the property of the competition organisers. The winner will take responsibility for ensuring safekeeping of the trophy until the next exhibition. The trophy must be returned in good condition, in the supplied packaging, in good time for award to the winner of the subsequent competition.

The winner may arrange for their name and the year of the award to be professionally engraved on the base of the trophy at their own cost.

No alternative prizes, cash payments or awards will be made. In all matters relating to the competition, decisions made by the organisers are final.
6 August 2022 at 18:44 #608580
bernard towers
Participant
@bernardtowers37738
above email address not working
6 August 2022 at 19:05 #608581
JasonB
Moderator
@jasonb
Should be OK now, Neil had it as Mortoons.
7 August 2022 at 08:56 #608609
bernard towers
Participant
@bernardtowers37738
Thanks Jason.
6 September 2022 at 13:40 #612569
Neil Wyatt
Moderator
@neilwyatt
I have had enough entries to make the competition viable, but only just.

As a result, the deadline for entries is being extended to 30 September.

More details in my editorial in MEW 320, the entries will be featured in MEW 321.

Neil
18 October 2022 at 15:19 #617728
The Delectable Debs
Participant
@thedelectabledebs
Hi everyone, I'll look forward to seeing your entries and especially the eventual successful trophy winning workshop device.

John would be very pleased to see you all still busy "making swarf and taking the mickey", just like the old days!

Kindest regards,

Debs.
18 October 2022 at 18:52 #617760
Ian Johnson 1
Participant
@ianjohnson1
Well I finally had to give the trophy back! Pleasure to meet you at the Midlands show Neil, now i know it is in safe hands to give to the next winner.

Big thankyou to everyone who voted for my little quick change tool holder for my KX1 CNC mill in the last John Stevenson trophy competition, the tool holder is still in regular use.

Good luck to everyone who entered this year, they are an excellent example of the skill of the model engineer, all very varied, well made and very useful workshop equipment. I'll be voting later on.

Regards

IanJ
28 October 2022 at 11:41 #618859
Neil Wyatt
Moderator
@neilwyatt
Voting is open at:http://www.model-engineer.co.uk/editorial/page.asp?p=1463

Scroll to the bottom of the page if you have already decided how to vote.

Neil
28 October 2022 at 11:47 #618860
Neil Wyatt
Moderator
@neilwyatt
A QR code for voting by phone!
28 October 2022 at 12:33 #618861
DC31k
Participant
@dc31k
Posted by Neil Wyatt on 28/10/2022 11:41:47:

Voting is open at:http://www.model-engineer.co.uk/editorial/page.asp?p=1463

On page 32 of a pdf copy of Issue 321, there is also a link:

https://www.modelengineer.co.uk/stevenson (sic).

This is strange as a) it is different to the one you give above b) it has no hyphen between 'model' and 'engineer' even though the footer printed on the very same page does have a hyphen.

As an aside, when I was at university, in every student election there was a candidate for whom one could vote called RON, or 're-open nominations', meaning that in the voter's opinion, none of the candidates was deserving the post.
28 October 2022 at 12:52 #618866
Michael Gilligan
Participant
@michaelgilligan61133
Posted by DC31k on 28/10/2022 12:33:44:

On page 32 of a pdf copy of Issue 321, there is also a link:

https://www.modelengineer.co.uk/stevenson (sic).

This is strange […]

.

Not only strange, but invalid

MichaelG.
28 October 2022 at 12:57 #618868
Hopper
Participant
@hopper
Posted by DC31k on 28/10/2022 12:33:44:

As an aside, when I was at university, in every student election there was a candidate for whom one could vote called RON, or 're-open nominations', meaning that in the voter's opinion, none of the candidates was deserving the post.

I used to work with an old codger who would sidle up to apprentices and ask for a couple of cigarettes, one for him and one for Ron. When asked who was Ron, the reply came: Later-on.

Back on topic, the link Neil posted above works OK. I just tried it.

Edited By Hopper on 28/10/2022 12:59:25
28 October 2022 at 13:24 #618873
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Hopper on 28/10/2022 12:57:43:

Back on topic, the link Neil posted above works OK.

.

The QR code works too … taking the user directly to **LINK**

https://vote.easypolls.net/63401d483878f5006379d925

MichaelG.
Author

Posts