Supplier metal formings

Supplier metal formings

This topic has 10 replies, 6 voices, and was last updated 17 May 2016 at 09:50 by RonMc.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
16 May 2016 at 16:46 #238943
RonMc
Participant
@ronmc
I require 6 aluminium endplates, 4mm thick:

Dimensions are:

200mm inside dimension

75 mm legs

Height 100mm

any ideas where I can have them made I haven't the facilities to bend anything like this.

Ron Mc
Advert

16 May 2016 at 16:46 #39387
RonMc
Participant
@ronmc
Aluminium channel shaped plates
16 May 2016 at 17:56 #238953
Tim Stevens
Participant
@timstevens64731
It would help to know – endplates for what? Clearly there are bends, but how long?

etc

Tim
16 May 2016 at 18:26 #238958
RonMc
Participant
@ronmc
Thanks for the query Tim

The height is 100mm, width is 200mm inside dimension and the side legs are 75mm long.

they are endplates for pedal steel guitars.
16 May 2016 at 18:46 #238961
michael darby
Participant
@michaeldarby61557
Try your local fabricators or sheet metal shop,they will have the necessary equipment
16 May 2016 at 19:04 #238962
RonMc
Participant
@ronmc
Yes Michael, I haven't tried any local searching yet, the guy who did them for me previously can't do them anymore so I just thought, maybe some of you chaps would know someone who did small orders.

Thanks for the replies though.
16 May 2016 at 19:23 #238964
duncan webster 1
Participant
@duncanwebster1
I can think of at least 2 in Warrington, depends where you are.
16 May 2016 at 19:26 #238965
RonMc
Participant
@ronmc
Milton Keynes Duncan.
16 May 2016 at 20:09 #238966
martin perman 1
Participant
@martinperman1
Ron Mc,

There is a Fabrication Company in St Neots who do all of the Fabrication that the company I work for need, they work in Stainless mostly but it would be worth asking, the company is IMPlastec and one of their directors is called Ian. I dont have the office no but if of use I can PM it to you tomorrow.

Martin P
16 May 2016 at 20:45 #238968
Tony Pratt 1
Participant
@tonypratt1
Posted by RonMc on 16/05/2016 19:26:52:

Milton Keynes Duncan.

Crown Precision Engineering Ltd

Website

Directions

Steel Fabricator

Address: Stadium Business Court, Denbigh West Industrial Estate, Denbigh Rd, Bletchley, Milton Keynes MK1 1AX

Phone:01908 376080

Tony
17 May 2016 at 09:50 #239015
RonMc
Participant
@ronmc
Thanks for all your replies, I am making some enquiries, I'll post how I get on.

Best Regards Ron Mc
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 6
- 6
- 15 February 2025 at 21:20
  noel shelley
- Diamond Wheel dressing attachment
  Started by: David George 1 in: Help and Assistance! (Offered or Wanted)
- 9
- 14
- 15 February 2025 at 21:18
  David George 1
- Electric Car Battery Retention 1 2 3
  Started by: Vic in: The Tea Room
- 26
- 51
- 15 February 2025 at 21:13
  noel shelley
- Myford ml2/3 change gears
  Started by: barry in: Beginners questions
- 6
- 17
- 15 February 2025 at 20:31
  barry
- ML7 Topslide limitations
  Started by: Mike Poole in: Manual machine tools
- 12
- 23
- 15 February 2025 at 20:16
  Michael Gilligan
- ML7 cross-slide problem
  Started by: Mike Joseph in: Workshop Tools and Tooling
- 4
- 4
- 15 February 2025 at 19:59
  Adrian R2
- Model Turbines 1 2 … 23 24
  Started by: Turbine Guy in: Stationary engines
- 28
- 584
- 15 February 2025 at 19:54
  Turbine Guy
- Mens Shed
  Started by: Simon Neath 2 in: General Questions
- 7
- 7
- 15 February 2025 at 19:50
  Dod Mole
- Vickers Inverted Engine 1 2
  Started by: JasonB in: Stationary engines
- 9
- 29
- 15 February 2025 at 18:59
  JasonB
- My week this week! My workshop videos 1 2 … 11 12
  Started by: Phil Whitley in: The Tea Room
- 13
- 278
- 15 February 2025 at 16:27
  Phil Whitley
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 18
- 91
- 15 February 2025 at 15:34
  Michael Gilligan
- Can a metric baby do imperial? 1 2 3
  Started by: beeza650 in: Beginners questions
- 25
- 57
- 15 February 2025 at 13:58
  Graham Meek
- Crimson lake royal Scot
  Started by: Michael Callaghan in: General Questions
- 8
- 13
- 15 February 2025 at 13:40
  Fowlers Fury
- Small taps general questions
  Started by: Steve Huckins in: Beginners questions
- 16
- 20
- 15 February 2025 at 13:18
  JasonB
- Meddings Overhaul – missing parts
  Started by: Woodlikesbikes in: Manual machine tools
- 5
- 7
- 15 February 2025 at 11:23
  Woodlikesbikes
- Slow to load 1 2
  Started by: Diogenes in: Website Questions, Comments, and Suggestions
- 19
- 31
- 15 February 2025 at 10:39
  noel shelley
- Securing smokebox number plate
  Started by: Derek Drover in: General Questions
- 5
- 5
- 14 February 2025 at 22:58
  duncan webster 1
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 4
- 14 February 2025 at 22:32
  Mark Rand
- Mains powered led microscope light
  Started by: old mart in: Clocks and Scientific Instruments
- 5
- 13
- 14 February 2025 at 20:46
  old mart
- Electromagnets (Split From Stuart Dynamo) 1 2 3 4
  Started by: SillyOldDuffer in: Beginners questions
- 17
- 81
- 14 February 2025 at 11:16
  John Haine
- The March of Technology 1 2
  Started by: John Purdy in: Electronics in the Workshop
- 14
- 28
- 14 February 2025 at 08:18
  Martin Kyte
- Emco Mentor Wien Motor, missing ID plate, What voltage?
  Started by: Ian P in: Manual machine tools
- 12
- 21
- 13 February 2025 at 23:53
  duncan webster 1
- Just discovered the site & joined.
  Started by: rjenkinsgb in: Introduce Yourself – New members start here!
- 6
- 6
- 13 February 2025 at 22:28
  Howard Lewis
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 30
- 13 February 2025 at 20:20
  bernard towers
- More Lidl questions 1 2
  Started by: old mart in: Hints And Tips for model engineers
- 18
- 32
- 13 February 2025 at 19:56
  Robert Atkinson 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies