Patterns for castings

Patterns for castings

This topic has 1 reply, 1 voice, and was last updated 4 February 2011 at 06:15 by Chris Pattison.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
4 February 2011 at 06:15 #63522
Chris Pattison
Participant
@chrispattison44592
It occurred to me that many people over the years will have made patterns for castings for projects they were building. Once used, these could be languishing at the back of their workshop, whereas someone else may be looking for exactly that pattern.

My suggestion is that a database of patterns be set up so that people can communicate with each other with a view to loaning/ buying patterns that are no longer needed by the original maker.
Advert

4 February 2011 at 06:15 #39152
Chris Pattison
Participant
@chrispattison44592
Database for patterns
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Christmas comes early !!
  Started by: Michael Gilligan in: The Tea Room
- 3
- 3
- 30 January 2025 at 22:22
  Nigel Graham 2
- OKMO Microcosm JO6B Miniature Stirling Engine
  Started by: Blue Heeler in: Miscellaneous models
- 1
- 1
- 30 January 2025 at 22:18
  Blue Heeler
- Had Another Go 1 2 … 13 14
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 338
- 30 January 2025 at 22:17
  Nigel Graham 2
- Drawing Standards 1 2
  Started by: John Stevenson 1 in: CAD – Technical drawing & design
- 22
- 33
- 30 January 2025 at 22:04
  HOWARDT
- Camel back straight edge
  Started by: me1 in: General Questions
- 12
- 23
- 30 January 2025 at 21:52
  peak4
- Early Myford Super-7B gear change wheels??
  Started by: flatline in: Beginners questions
- 7
- 16
- 30 January 2025 at 21:11
  flatline
- What Did You Do Today 2025 1 2
  Started by: JasonB in: The Tea Room
- 17
- 35
- 30 January 2025 at 21:07
  bernard towers
- CAD – Target Enigma 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 67
- 30 January 2025 at 21:05
  Ian P
- The wonders of AI…
  Started by: Robin Graham in: The Tea Room
- 6
- 7
- 30 January 2025 at 20:45
  JohnF
- not so ‘run of the mill’?
  Started by: An Other in: Model Engineer.
- 4
- 4
- 30 January 2025 at 20:44
  Clive Foster
- 16-Channel Analog Multiplexer Demultiplexer
  Started by: Michael Gilligan in: Electronics in the Workshop
- 4
- 8
- 30 January 2025 at 20:35
  Bazyle
- Shades of black humour
  Started by: JimmieS in: The Tea Room
- 10
- 10
- 30 January 2025 at 18:25
  Harry Wilkes
- Myford S7 VFD problem 1 2
  Started by: Glyn Davies in: Manual machine tools
- 17
- 27
- 30 January 2025 at 18:24
  Neil Lickfold
- Using Schneider ATV12 with remote terminal VW3A1006.
  Started by: chrismac in: Workshop Tools and Tooling
- 4
- 11
- 30 January 2025 at 17:14
  David Jupp
- battery charger
  Started by: duncan webster 1 in: Electronics in the Workshop
- 13
- 22
- 30 January 2025 at 16:43
  Taf_Pembs
- Mind-Boggling Numbers
  Started by: Michael Gilligan in: The Tea Room
- 5
- 9
- 30 January 2025 at 16:22
  jaCK Hobson
- For Sale Voltera V1 PCB machine
  Started by: Redpiperbob in: General Questions
- 3
- 3
- 30 January 2025 at 15:26
  JasonB
- Transistor Circuit to Operate Relay from Arduino Uno 1 2
  Started by: James Alford in: Electronics in the Workshop
- 11
- 40
- 30 January 2025 at 13:38
  John Haine
- Fixing boiler cleading to firebox
  Started by: Peter Venn in: General Questions
- 6
- 6
- 30 January 2025 at 12:57
  duncan webster 1
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 108
- 30 January 2025 at 11:43
  Graham Meek
- Wicking felt for lathe headstock bearings
  Started by: YouraT in: Manual machine tools
- 10
- 25
- 30 January 2025 at 02:54
  Michael Gilligan
- building milling machine made from scrap part 1
  Started by: celso ari schlichting in: General Questions
- 1
- 6
- 29 January 2025 at 21:50
  celso ari schlichting
- Press Fit 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 18
- 26
- 29 January 2025 at 20:25
  Peter Simpson 3
- Pressure washer?
  Started by: Frank Gorse in: General Questions
- 10
- 19
- 29 January 2025 at 20:17
  Frank Gorse
- Stanley knives 1 2
  Started by: old fool in: The Tea Room
- 22
- 35
- 29 January 2025 at 19:51
  Robert Atkinson 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies