Missing pages from back issues of Model Engineer

Missing pages from back issues of Model Engineer

This topic has 5 replies, 5 voices, and was last updated 21 December 2009 at 01:16 by Gone Away.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
18 December 2009 at 23:56 #39083
Tomk
Participant
@tomk39956
Advert

18 December 2009 at 23:56 #46401
Tomk
Participant
@tomk39956
I was browsing through the back issues of Model engineer and found that there is missing pages from Vol 199 issue 4304. The missing pages are 31,32,33,and 34.

Also on Vol 199 4303 pages 2,5, 7 and 56 are missing

Have these pages been ommited for any reason

Tomk
20 December 2009 at 13:33 #46455
Gordon
Participant
@gordon
David

I have also found a similar problem with the earlier issues of the digital magazine.

This is just an example of issue 8, ALL of the early issues are similar.

The issue 8 starts at page 10, then follows on to 18, 19 & 20 are missing completely, then goes to 21, then consecutively to29,then to 3, then to 31 etc.

I would not mind if these were free copies, I could put up withit, but to charge an annual subscription is completely out of order. The copies should have been scanned and proof read prior to publishing them.

I really hope the management is going to rectify these problems.

Yours

Gordy
20 December 2009 at 13:49 #46457
Richmond
Participant
@richmond
Hi,

We have sent forwarded these issues to management, and they will hopefully be rectified soon. Please bear with us, unfortunately this work was carried out via a different team, and was not under the editorial teams control.

However, rest assured we will do all in our power to have these problems rectified as soon as is praticably possible.

Our sincere apologies.

Edited By Richmond on 20/12/2009 14:04:03

Edited By Richmond on 20/12/2009 14:04:18
20 December 2009 at 15:35 #46463
David Clark 13
Participant
@davidclark13
Hi There

I have forwarded these issues to the person in charge of putting them online.

regards David
21 December 2009 at 01:16 #46480
Gone Away
Participant
@goneaway
Apart from missing pages, I’ve noticed several issues with pages in the wrong sequence.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Sieg KX3 USB
  Started by: Matt Harrington in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 3
- 10 January 2025 at 23:32
  Matt Harrington
- Bars for Boring Head
  Started by: adamcowman in: Workshop Tools and Tooling
- 12
- 24
- 10 January 2025 at 23:18
  Vic
- Subscriptions – Going Forward 1 2 3 4
  Started by: JasonB in: Subscription issues and Digital magazines
- 30
- 87
- 10 January 2025 at 22:17
  Nigel Graham 2
- Spring material advice needed
  Started by: old mart in: Materials
- 13
- 23
- 10 January 2025 at 22:08
  Bill Phinn
- Mill Power feed unit. 1 2 3
  Started by: Taf_Pembs in: Manual machine tools
- 20
- 54
- 10 January 2025 at 22:03
  Bill Phinn
- Had Another Go 1 2 … 4 5
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 19
- 118
- 10 January 2025 at 22:02
  Nigel Graham 2
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 8 9
  Started by: Neil Wyatt in: Model Engineer.
- 60
- 215
- 10 January 2025 at 21:45
  duncan webster 1
- Lurker looking to help somone
  Started by: peterhod in: Introduce Yourself – New members start here!
- 4
- 4
- 10 January 2025 at 20:35
  old mart
- What Did You Do Today 2025
  Started by: JasonB in: The Tea Room
- 11
- 15
- 10 January 2025 at 20:21
  Nigel Graham 2
- Internal thread & taper in same hole
  Started by: Dell in: Workshop Techniques
- 9
- 20
- 10 January 2025 at 19:49
  Andrew Crow
- Adhesive/cement required for a ceramic insulator 1 2
  Started by: Greensands in: The Tea Room
- 19
- 33
- 10 January 2025 at 19:42
  Andrew Tinsley
- Coal 1 2
  Started by: Michael Callaghan in: General Questions
- 19
- 29
- 10 January 2025 at 16:01
  SillyOldDuffer
- New by looking for recommendations
  Started by: bryanhoc in: Introduce Yourself – New members start here!
- 6
- 10
- 10 January 2025 at 15:13
  bernard towers
- Brian’s 1″ Minnie Traction Engine 1 2 … 12 13
  Started by: Brian Abbott in: Traction engines
- 37
- 325
- 10 January 2025 at 13:14
  JasonB
- New 3D Resin Printer
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 3
- 5
- 10 January 2025 at 11:02
  Julie Ann
- Who stole my wallpaper paste ???
  Started by: Speedy Builder5 in: The Tea Room
- 13
- 20
- 10 January 2025 at 04:56
  Alan Charleston
- Ash vacuum purchase recommendations?
  Started by: jon hill 3 in: The Tea Room
- 13
- 14
- 9 January 2025 at 23:15
  howardb
- Archive access going forward
  Started by: Peter Cook 6 in: Subscription issues and Digital magazines
- 3
- 3
- 9 January 2025 at 20:37
  Martin Kyte
- Unkown micrometer manufacturer
  Started by: Tomk in: Workshop Tools and Tooling
- 9
- 15
- 9 January 2025 at 18:43
  SillyOldDuffer
- EMCO MAXIMAT V10 LATHE
  Started by: MickB in: General Questions
- 13
- 23
- 9 January 2025 at 18:40
  Neil Lickfold
- Eclipse Replica
  Started by: paul rayner in: Stationary engines
- 2
- 3
- 9 January 2025 at 18:39
  paul rayner
- Arduino Uno: Missing Libraries 1 2
  Started by: James Alford in: Electronics in the Workshop
- 7
- 29
- 9 January 2025 at 18:04
  James Alford
- DeWalt Organiser
  Started by: Vic in: The Tea Room
- 2
- 5
- 9 January 2025 at 16:32
  Vic
- Retired steam engineer
  Started by: daisytwoduffs in: Introduce Yourself – New members start here!
- 7
- 7
- 9 January 2025 at 15:03
  Jon Lawes
- Help for DIY lathe build.
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 15
- 20
- 9 January 2025 at 05:38
  Pete

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies