Emma Victoria – Valve fork fixing

Emma Victoria – Valve fork fixing

This topic has 1 reply, 2 voices, and was last updated 26 May 2014 at 20:53 by Henry Wood.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
26 May 2014 at 20:53 #153645
Henry Wood
Participant
@henrywood50588
To all those who are building Emma-Victoria, with regards to the fixing of the fork end to the cylinder valve spindle. On the cylinder drawings I have shown the spindle with a 5/32" x 40 thread, however on the fork end detail I have shown a 5/32" reamed hole and pinning. My original intention was to quote both methods but I didn't make this note on the drawings and in the write up. I have used both methods in the past and both are O.K. I hope this will not have caused any problems for those who are building.

Regards

Henry

Edited By JasonB on 28/05/2014 07:38:29
Advert

28 May 2014 at 07:38 #38783
JasonB
Moderator
@jasonb
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Continuing the Television theme …
  Started by: Michael Gilligan in: Electronics in the Workshop
- 8
- 14
- 4 March 2025 at 01:08
  Nicholas Farr
- boring for crankshaft
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 3 March 2025 at 23:20
  Peter Cook 6
- Case hardening
  Started by: Garry Coles in: General Questions
- 7
- 10
- 3 March 2025 at 21:41
  Fulmen
- What’s this for…no.8?
  Started by: beeza650 in: Beginners questions
- 9
- 16
- 3 March 2025 at 21:38
  Georgineer
- A” WEAVER “1CC DIESEL ENGINE 1 2
  Started by: KEITH BEAUMONT in: I/C Engines
- 8
- 29
- 3 March 2025 at 21:24
  jimbo7636
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 18
- 3 March 2025 at 20:56
  Tomek
- Use of a weighted cord for bullwheel indexing.
  Started by: Greensands in: Workshop Techniques
- 8
- 10
- 3 March 2025 at 20:51
  John Purdy
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 5
- 5
- 3 March 2025 at 20:41
  old mart
- Lead-sheathed wiring – why? 1 2
  Started by: gerry madden in: Materials
- 24
- 28
- 3 March 2025 at 20:36
  old mart
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 14
- 23
- 3 March 2025 at 20:23
  Julie Ann
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 14
- 32
- 3 March 2025 at 20:13
  old mart
- Another lidl picture fail
  Started by: Ian Parkin in: The Tea Room
- 4
- 5
- 3 March 2025 at 19:25
  V8Eng
- Taig lathe DC motor 1 2
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 10
- 26
- 3 March 2025 at 19:15
  John Haine
- Dr Schlesinger
  Started by: ryan.carter848 in: Books
- 4
- 5
- 3 March 2025 at 11:58
  Phil P
- Windows 11 Upgrade – non compliant machines.
  Started by: Peter Cook 6 in: The Tea Room
- 6
- 7
- 3 March 2025 at 10:01
  Howi
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 7
- 12
- 3 March 2025 at 09:13
  Circlip
- Slow Again? 1 2
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 50
- 3 March 2025 at 08:17
  SillyOldDuffer
- Always be careful
  Started by: Blue Heeler in: The Tea Room
- 2
- 2
- 3 March 2025 at 08:06
  Nealeb
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 12
- 20
- 2 March 2025 at 21:21
  Fulmen
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 14
- 16
- 2 March 2025 at 19:24
  flatline
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 9
- 20
- 2 March 2025 at 19:19
  Colin Bishop
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 5
- 7
- 2 March 2025 at 16:54
  Speedy Builder5
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 54
- 172
- 2 March 2025 at 15:18
  JasonB
- What’s this for…no.7?
  Started by: beeza650 in: Beginners questions
- 5
- 8
- 2 March 2025 at 15:17
  beeza650
- Ford Transit
  Started by: Vic in: The Tea Room
- 8
- 14
- 2 March 2025 at 15:03
  Trevor Drabble 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies