Traction Engine Lamp Article Drawing Errors

Traction Engine Lamp Article Drawing Errors

This topic has 1 reply, 1 voice, and was last updated 17 October 2013 at 12:55 by Jeff Dayman.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
17 October 2013 at 12:55 #38776
Jeff Dayman
Participant
@jeffdayman43397
Advert

17 October 2013 at 12:55 #132899
Jeff Dayman
Participant
@jeffdayman43397
In issue 4463 pg 295 the "wick adjuster" detail shows a .25" dia x .064 flange at the right end of the part. Photo 82 on the following page shows this flange on the inboard (left) end of the part. It looks like the flange must be on the left end as in photo 82 for assy to be possible into the "burner" part. It would be better if the details in Fig5 pg 295 were drawn at a larger scale. Bad job by the illustrator.

On the "burner" detail the horizontal dimension from centre of the part to centre of the .188 hole is missing.

This is an excellent series of articles which I have enjoyed, although I have no immediate plans to make these lamps. Congratulations to Mr.Couchman on a fine series.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Turning Question: Fine Chatter / Wave Pattern 1 2
  Started by: Nigel Graham 2 in: General Questions
- 13
- 30
- 4 March 2025 at 05:20
  Simon Collier
- Continuing the Television theme …
  Started by: Michael Gilligan in: Electronics in the Workshop
- 8
- 14
- 4 March 2025 at 01:08
  Nicholas Farr
- boring for crankshaft
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 3 March 2025 at 23:20
  Peter Cook 6
- Case hardening
  Started by: Garry Coles in: General Questions
- 7
- 10
- 3 March 2025 at 21:41
  Fulmen
- What’s this for…no.8?
  Started by: beeza650 in: Beginners questions
- 9
- 16
- 3 March 2025 at 21:38
  Georgineer
- A” WEAVER “1CC DIESEL ENGINE 1 2
  Started by: KEITH BEAUMONT in: I/C Engines
- 8
- 29
- 3 March 2025 at 21:24
  jimbo7636
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 18
- 3 March 2025 at 20:56
  Tomek
- Use of a weighted cord for bullwheel indexing.
  Started by: Greensands in: Workshop Techniques
- 8
- 10
- 3 March 2025 at 20:51
  John Purdy
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 5
- 5
- 3 March 2025 at 20:41
  old mart
- Lead-sheathed wiring – why? 1 2
  Started by: gerry madden in: Materials
- 24
- 28
- 3 March 2025 at 20:36
  old mart
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 14
- 23
- 3 March 2025 at 20:23
  Julie Ann
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 14
- 32
- 3 March 2025 at 20:13
  old mart
- Another lidl picture fail
  Started by: Ian Parkin in: The Tea Room
- 4
- 5
- 3 March 2025 at 19:25
  V8Eng
- Taig lathe DC motor 1 2
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 10
- 26
- 3 March 2025 at 19:15
  John Haine
- Dr Schlesinger
  Started by: ryan.carter848 in: Books
- 4
- 5
- 3 March 2025 at 11:58
  Phil P
- Windows 11 Upgrade – non compliant machines.
  Started by: Peter Cook 6 in: The Tea Room
- 6
- 7
- 3 March 2025 at 10:01
  Howi
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 7
- 12
- 3 March 2025 at 09:13
  Circlip
- Slow Again? 1 2
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 50
- 3 March 2025 at 08:17
  SillyOldDuffer
- Always be careful
  Started by: Blue Heeler in: The Tea Room
- 2
- 2
- 3 March 2025 at 08:06
  Nealeb
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 12
- 20
- 2 March 2025 at 21:21
  Fulmen
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 14
- 16
- 2 March 2025 at 19:24
  flatline
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 9
- 20
- 2 March 2025 at 19:19
  Colin Bishop
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 5
- 7
- 2 March 2025 at 16:54
  Speedy Builder5
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 54
- 172
- 2 March 2025 at 15:18
  JasonB
- What’s this for…no.7?
  Started by: beeza650 in: Beginners questions
- 5
- 8
- 2 March 2025 at 15:17
  beeza650

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies