Charlie Q1

Charlie Q1

This topic has 5 replies, 4 voices, and was last updated 16 November 2012 at 08:53 by nick feast.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
17 July 2012 at 18:27 #94640
alan-lloyd
Participant
@alan-lloyd
The springs specified on the drawing of the locomotive axle boxes will not fit, the i/d is too small. I suspect the studs should be 5ba as per Don Youngs drawing of the Derby 4F that this model is based on.
Advert

17 July 2012 at 18:27 #38754
alan-lloyd
Participant
@alan-lloyd
24 October 2012 at 15:01 #101819
nick feast
Participant
@nickfeast85472
Definitely my mistake, either use 5BA as suggested or obtain bigger diameter springs such as Lee LC-042C-9.

Apologies

Nick
24 October 2012 at 18:54 #101836
Nigel Hyde
Participant
@nigelhyde97004
Hi Nick

could you tell me where I can get the springs you have stated Lee LC-042C-9.

I have looked on Lee springs and they are not listed

thanks Nigel
24 October 2012 at 21:35 #101852
AndyP
Participant
@andyp13730
Try searching on LC-042C-09 (those are zeros) not letter Os – oops 2 Ronnies !

Andy
16 November 2012 at 08:53 #103822
nick feast
Participant
@nickfeast85472
Sorry Nigel I was working from a ten year old hard copy of the catalogue! Hope this spring still available.

Nick
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Turning Question: Fine Chatter / Wave Pattern 1 2
  Started by: Nigel Graham 2 in: General Questions
- 13
- 30
- 4 March 2025 at 05:20
  Simon Collier
- Continuing the Television theme …
  Started by: Michael Gilligan in: Electronics in the Workshop
- 8
- 14
- 4 March 2025 at 01:08
  Nicholas Farr
- boring for crankshaft
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 3 March 2025 at 23:20
  Peter Cook 6
- Case hardening
  Started by: Garry Coles in: General Questions
- 7
- 10
- 3 March 2025 at 21:41
  Fulmen
- What’s this for…no.8?
  Started by: beeza650 in: Beginners questions
- 9
- 16
- 3 March 2025 at 21:38
  Georgineer
- A” WEAVER “1CC DIESEL ENGINE 1 2
  Started by: KEITH BEAUMONT in: I/C Engines
- 8
- 29
- 3 March 2025 at 21:24
  jimbo7636
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 18
- 3 March 2025 at 20:56
  Tomek
- Use of a weighted cord for bullwheel indexing.
  Started by: Greensands in: Workshop Techniques
- 8
- 10
- 3 March 2025 at 20:51
  John Purdy
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 5
- 5
- 3 March 2025 at 20:41
  old mart
- Lead-sheathed wiring – why? 1 2
  Started by: gerry madden in: Materials
- 24
- 28
- 3 March 2025 at 20:36
  old mart
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 14
- 23
- 3 March 2025 at 20:23
  Julie Ann
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 14
- 32
- 3 March 2025 at 20:13
  old mart
- Another lidl picture fail
  Started by: Ian Parkin in: The Tea Room
- 4
- 5
- 3 March 2025 at 19:25
  V8Eng
- Taig lathe DC motor 1 2
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 10
- 26
- 3 March 2025 at 19:15
  John Haine
- Dr Schlesinger
  Started by: ryan.carter848 in: Books
- 4
- 5
- 3 March 2025 at 11:58
  Phil P
- Windows 11 Upgrade – non compliant machines.
  Started by: Peter Cook 6 in: The Tea Room
- 6
- 7
- 3 March 2025 at 10:01
  Howi
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 7
- 12
- 3 March 2025 at 09:13
  Circlip
- Slow Again? 1 2
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 50
- 3 March 2025 at 08:17
  SillyOldDuffer
- Always be careful
  Started by: Blue Heeler in: The Tea Room
- 2
- 2
- 3 March 2025 at 08:06
  Nealeb
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 12
- 20
- 2 March 2025 at 21:21
  Fulmen
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 14
- 16
- 2 March 2025 at 19:24
  flatline
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 9
- 20
- 2 March 2025 at 19:19
  Colin Bishop
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 5
- 7
- 2 March 2025 at 16:54
  Speedy Builder5
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 54
- 172
- 2 March 2025 at 15:18
  JasonB
- What’s this for…no.7?
  Started by: beeza650 in: Beginners questions
- 5
- 8
- 2 March 2025 at 15:17
  beeza650

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies