ring lights to mill and drill

ring lights to mill and drill

This topic has 1 reply, 1 voice, and was last updated 9 December 2019 at 14:45 by bricky.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
9 December 2019 at 14:45 #440890
bricky
Participant
@bricky
Having read Michael Cox's article in MEW No 287 I liked the idea and purchased from Auto Lights [no Connection] a pair of 100mm led's and I followed Micheals procedure of using 8mm MDF,this was fine for me as headroom is not an issue.I did not sink the magnets in the MDF as the article but glued them on the surface of the rings.My mill is a SX3 and a 100mm ring light is the maximum that can be accomodated.I do get a small shadow below the collet chuck,but this dose not bother me as I use a laser centre finder and I won't have to turn off the light to find the punch mark.A great immprovement on my two halogen lights which if not careful would melt the plastic ends of the spider.Thanks Michael.

Frank
Advert

9 December 2019 at 14:45 #38546
bricky
Participant
@bricky
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Slow to load
  Started by: Diogenes in: Website Questions, Comments, and Suggestions
- 11
- 18
- 8 February 2025 at 12:27
  Michael Gilligan
- Calling all Little John and other Raglan users
  Started by: David Senior in: General Questions
- 3
- 7
- 8 February 2025 at 12:21
  David Senior
- Electric Car Battery Retention
  Started by: Vic in: The Tea Room
- 13
- 17
- 8 February 2025 at 12:09
  Vic
- Cheap but useful Multimeter
  Started by: Danni Burns in: Electronics in the Workshop
- 5
- 9
- 8 February 2025 at 12:01
  Robert Atkinson 2
- Long response time
  Started by: John Haine in: New Forum Software questions, comments and Test Threads
- 7
- 9
- 8 February 2025 at 10:57
  JasonB
- CA glue and magnetism
  Started by: Bill Phinn in: General Questions
- 9
- 13
- 8 February 2025 at 10:35
  bernard towers
- 3D Touch Probe, Sieg KX3 & Mach3
  Started by: Matt Harrington in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 4
- 8 February 2025 at 10:30
  John Haine
- Alibre Workshop/Meshcam pro
  Started by: Ian McVickers in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 6
- 10
- 8 February 2025 at 10:16
  John Hinkley
- How to identify a thread, ACME vs TR
  Started by: moonman in: Beginners questions
- 16
- 22
- 8 February 2025 at 07:44
  David George 1
- [Mercedes] Becker Map Pilot
  Started by: Michael Gilligan in: The Tea Room
- 1
- 2
- 7 February 2025 at 20:20
  Michael Gilligan
- Drilling feed rates
  Started by: Beardy Mike in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 2
- 2
- 7 February 2025 at 18:53
  JasonB
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 11
- 18
- 7 February 2025 at 16:52
  Macolm
- Parting off – Left over nib
  Started by: Blue Heeler in: Workshop Techniques
- 7
- 11
- 7 February 2025 at 15:57
  Colin Heseltine
- speed control dc motor problem.
  Started by: mark smith 20 in: Workshop Tools and Tooling
- 2
- 4
- 7 February 2025 at 10:57
  mark smith 20
- What Do These Mean; Why So Many Loop Errors? (Alibre Atom)
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 5
- 11
- 7 February 2025 at 10:20
  Nealeb
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 11
- 16
- 7 February 2025 at 08:27
  james rumble
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 6
- 10
- 7 February 2025 at 07:05
  Diogenes
- OKMO Microcosm Model M31 Vertical Steam Engine Single Cylinder with DIY Mods
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 7 February 2025 at 01:07
  Blue Heeler
- Solid Edge – Spring Designer – Help! 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 7
- 28
- 6 February 2025 at 17:51
  SillyOldDuffer
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 3
- 4
- 6 February 2025 at 17:06
  zymurgy2289
- Drill press will not start
  Started by: AStroud in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 6 February 2025 at 16:57
  Andrew Tinsley
- Lidl spray aerosol items 1 2
  Started by: Bootlegger Blacky in: Hints And Tips for model engineers
- 20
- 26
- 6 February 2025 at 16:53
  Mick B1
- Totally unacceptable treatment 1 2
  Started by: Me. in: General Questions
- 14
- 28
- 6 February 2025 at 15:49
  John Hinkley
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 21
- 28
- 6 February 2025 at 13:48
  Tony Pratt 1
- Vickers Inverted Engine
  Started by: JasonB in: Stationary engines
- 9
- 25
- 6 February 2025 at 13:14
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies