Pixie feeder MEW 203

Advert

New Replies

Report Bug

Help/FAQs

Pixie feeder MEW 203

This topic has 9 replies, 3 voices, and was last updated 22 September 2013 at 15:39 by Reginald Alders 1.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
20 September 2013 at 16:28 #130272
Reginald Alders 1
Participant
@reginaldalders1
Has anyone built the Pixie feeder from Mew 203 and how easy is it to put together .
Advert

20 September 2013 at 16:28 #38197
Reginald Alders 1
Participant
@reginaldalders1
Assembly of Pixie feeder
20 September 2013 at 21:44 #130290
Paul Barrett
Participant
@paulbarrett57424
I built it after buying the printed circuit board. It is easy enough to build although the article does not quite explain it all. I found it very limited on the speed it would drive a stepper. I certainly could not get it to operate it as described in the article despite messing about with the program. I was also interested in the rotary table program thinking it would make a programmable indexer but in the end I bought a rotary table module from steve ward and built my own which does everything i want.
21 September 2013 at 10:03 #130317
Reginald Alders 1
Participant
@reginaldalders1
Many thanks Paul. I also thought about using it on an indexing head to cut gears. I will probably not bother now . Does Steve Ward have a website
21 September 2013 at 10:51 #130323
John Stevenson 1
Participant
@johnstevenson1
http://www.worldofward.com/rotarycontroller/overview/

Steve Wards web site.

This thread is also a good read.

http://bbs.homeshopmachinist.net/threads/59781

Edited By John Stevenson on 21/09/2013 10:52:22

Edited By John Stevenson on 21/09/2013 18:31:22
21 September 2013 at 13:25 #130335
Paul Barrett
Participant
@paulbarrett57424
Reg.

I have just used the steve ward indexer module to engrave a new dial for my lathe. I wanted 100 divs which would be 3.6 deg or 3 deg 48 mins. With the indexer you can either set divs or degrees and it is so simle. I think mine worked out about £80 complete.I bought the module and keyboard from steve. got the case from rapid electronics and the stepper module from ebay. I fitted it all in the case and made my own overlay. I also stuck a 40mm fan inside as well as the heatsinks get a little warm. Power supply came from an old laptop charger.

I have some pics if you are interested.

Paul
21 September 2013 at 17:53 #130359
Reginald Alders 1
Participant
@reginaldalders1
Paul. sounds like an bargain. do you have the link to Steve Wards website, I tried John Stevensons link but it didn't work. Could I have a look at the Pics

Reg
21 September 2013 at 18:32 #130363
John Stevenson 1
Participant
@johnstevenson1
Link now fixed – sorry
22 September 2013 at 08:15 #130409
Paul Barrett
Participant
@paulbarrett57424
Reg.

I have sent you a pm.

Paul
22 September 2013 at 15:39 #130443
Reginald Alders 1
Participant
@reginaldalders1
Many thanks Paul i've looked at your pics and some demos on youtube so I have been on Steve Wards website and ordered the indexer module , All i have to do is find the time to assemble it when it arrives. Also many thanks John for your help . I will keep you posted when I get around to assembling it

Reg
Author

Posts