New subscriber from France

Advert

New Replies

Report Bug

Help/FAQs

New subscriber from France

This topic has 29 replies, 9 voices, and was last updated 8 May 2013 at 06:08 by Didier Yvron.

Viewing 25 posts - 1 through 25 (of 30 total)

1 2 →

Author

Posts
6 May 2013 at 17:19 #118546
Didier Yvron
Participant
@didieryvron
Hello from France,

I just receive my first issue the morning. Verry good magazine, but I have a question: Why I have not access to digital issues for MEW but only for Model Engineer (subcriber from last december) ?

Regards

Didier
Advert

6 May 2013 at 17:19 #38177
Didier Yvron
Participant
@didieryvron
7 May 2013 at 06:45 #118585
Nicholas Farr
Participant
@nicholasfarr14254
Hi Didier, you only get digital access to the magazine you subcribe to, so you would need to subcribe to MEW as well to get access to both digital issues.

Regards Nick.
7 May 2013 at 07:43 #118586
Russell Eberhardt
Participant
@russelleberhardt48058
Bonjour et bienvenu.

Russell (Dept. 66)
7 May 2013 at 10:42 #118602
Didier Yvron
Participant
@didieryvron
Posted by Russell Eberhardt on 07/05/2013 07:43:17:

Bonjour et bienvenu.

Russell (Dept. 66)

Merci Russel
7 May 2013 at 10:51 #118603
Didier Yvron
Participant
@didieryvron
Posted by Nicholas Farr on 07/05/2013 06:45:35:

Hi Didier, you only get digital access to the magazine you subcribe to, so you would need to subcribe to MEW as well to get access to both digital issues.

Regards Nick.

Hi Nick

As well I have subcribed to the both magazines and put my numbers in my details, but I have only access to Model Engineer and not to MEW digitals issues. I am very desappointed.

Regards

Didier
7 May 2013 at 11:00 #118604
Robert Dodds
Participant
@robertdodds43397
Didier,

Sounds like a job for one of the editors of the magazines

See

http://www.model-engineer.co.uk/editorial/page.asp?p=227

for details of contacting them

Bob D
7 May 2013 at 12:00 #118607
Speedy Builder5
Participant
@speedybuilder5
Bonjour Didier,

I hope your problem is resolved soon. Which department do you live in ? We are in Lot (46) and find it difficult to find small quantities of material in France at reasonable prices. Many UK suppliers will send material, but of course the postage can be a bit expensive. We would be interested if you know of some good vendors.

Bob Humphrey.
7 May 2013 at 13:46 #118617
simondavies3
Participant
@simondavies3
Bonjour Bob,

We are in Bouches du Rhone (13) and I get most of my brass and some aluminium from Tartaix in Paris, I have looked at Qualichutes recently (but not bought from them) and also from a guy calling himself blockenstock advertising on leboncoin.

Will be interested to hear of any others, especially down here in the south.

Simon
7 May 2013 at 13:46 #118630
simondavies3
Participant
@simondavies3
Bonjour Bob,

We are in Bouches du Rhone (13) and I get most of my brass and some aluminium from Tartaix in Paris, I have looked at Qualichutes recently (but not bought from them) and also from a guy calling himself blockenstock advertising on leboncoin.

Will be interested to hear of any others, especially down here in the south.

Simon
7 May 2013 at 17:39 #118643
Nicholas Farr
Participant
@nicholasfarr14254
Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.
7 May 2013 at 17:39 #118656
Nicholas Farr
Participant
@nicholasfarr14254
Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.
7 May 2013 at 17:42 #118645
Didier Yvron
Participant
@didieryvron
Posted by Speedy Builder5 on 07/05/2013 12:00:26:

Bonjour Didier,

I hope your problem is resolved soon. Which department do you live in ? We are in Lot (46) and find it difficult to find small quantities of material in France at reasonable prices. Many UK suppliers will send material, but of course the postage can be a bit expensive. We would be interested if you know of some good vendors.

Bob Humphrey.

I live in Bretagne, on l'Ile de Sein in Finistère. I nknow the problem to find material in France. I use Qualichutes et Blockenstok for steel Aluminium brass and bronze.

You are lucky in UK when I see the crowd of vendors of material and tools I think it's a paradise for model engineers and it's the reason why I buy the most part of my tools and castings in UK.

Regards

Didier

Edited By Didier Yvron on 07/05/2013 17:49:12
7 May 2013 at 17:42 #118658
Didier Yvron
Participant
@didieryvron
Posted by Speedy Builder5 on 07/05/2013 12:00:26:

Bonjour Didier,

I hope your problem is resolved soon. Which department do you live in ? We are in Lot (46) and find it difficult to find small quantities of material in France at reasonable prices. Many UK suppliers will send material, but of course the postage can be a bit expensive. We would be interested if you know of some good vendors.

Bob Humphrey.

I live in Bretagne, on l'Ile de Sein in Finistère. I nknow the problem to find material in France. I use Qualichutes et Blockenstok for steel Aluminium brass and bronze.

You are lucky in UK when I see the crowd of vendors of material and tools I think it's a paradise for model engineers and it's the reason why I buy the most part of my tools and castings in UK.

Regards

Didier

Edited By Didier Yvron on 07/05/2013 17:49:12
7 May 2013 at 17:43 #118647
JasonB
Moderator
@jasonb
Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J
7 May 2013 at 17:43 #118660
JasonB
Moderator
@jasonb
Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J
7 May 2013 at 17:51 #118649
Didier Yvron
Participant
@didieryvron
Posted by JasonB on 07/05/2013 17:43:10:

Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J

Thanks JasonB, I will contact them next monday.

Regards
7 May 2013 at 17:51 #118662
Didier Yvron
Participant
@didieryvron
Posted by JasonB on 07/05/2013 17:43:10:

Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J

Thanks JasonB, I will contact them next monday.

Regards
7 May 2013 at 17:53 #118651
Didier Yvron
Participant
@didieryvron
Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Thanks for the link. Don't worry for missunderstood, maybe my english is not perfect!!!
7 May 2013 at 17:53 #118664
Didier Yvron
Participant
@didieryvron
Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Thanks for the link. Don't worry for missunderstood, maybe my english is not perfect!!!
7 May 2013 at 18:04 #118653
Didier Yvron
Participant
@didieryvron
Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Oops I have not seen Simon0362 's answer
7 May 2013 at 18:04 #118666
Didier Yvron
Participant
@didieryvron
Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Oops I have not seen Simon0362 's answer
7 May 2013 at 18:24 #118655
Sub Mandrel
Participant
@submandrel
Hi Didier,

Welcome to the forums!

Make sure that you have entered teh correct subscriber numbers – you will have a different number for each magazine.

Neil
7 May 2013 at 18:24 #118668
Sub Mandrel
Participant
@submandrel
Hi Didier,

Welcome to the forums!

Make sure that you have entered teh correct subscriber numbers – you will have a different number for each magazine.

Neil
7 May 2013 at 18:33 #118659
Didier Yvron
Participant
@didieryvron
Posted by Stub Mandrel on 07/05/2013 18:24:58:

Hi Didier,

Welcome to the forums!

Make sure that you have entered teh correct subscriber numbers – you will have a different number for each magazine.

Neil

Yes Neil, I have checked my numbers, no problem.

Thanks

Regards – Didier
Author

Posts