MEW 196 – RPM Sensor, Page 42

MEW 196 – RPM Sensor, Page 42

This topic has 4 replies, 4 voices, and was last updated 18 January 2013 at 01:57 by Simon Fedida.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
15 November 2012 at 21:57 #103803
J. Becker
Participant
@j-becker22751
Based in Germany, I have not found a supplier for these sensors. Where can I buy a reasonably small number, say, five or six? NVE, the manufacturer sells them by the reel (thousand pcs).

I have searched farnell and ebay without any success.

Thank you.

Regards

Jochen
Advert

15 November 2012 at 21:57 #38156
J. Becker
Participant
@j-becker22751
Gear Tooth Sensor AKL001-12
16 November 2012 at 21:41 #103911
Sub Mandrel
Participant
@submandrel
HI Jochen,

Consider using **LINK** this produces a logic-level output unlike the original sensor so you will need to kmake some changes.

I use these for my rpm sensors and they woprk really well.

Neil
16 November 2012 at 21:58 #103916
john swift 1
Participant
@johnswift1
Hi Jochen

the first supplier in Germany I've found is Digikey :-

**LINK**

John

Edited By john swift 1 on 16/11/2012 22:00:15
18 January 2013 at 01:57 #109051
Simon Fedida
Participant
@simonfedida18373
Hi –

re the hall effect sensor – I'm also looking for a UK supplier, small quantity. The Allegro unit from Farnell is OK but I would rather have an analogue ouput device to interpolate between teeth.

NVE make an analogue variant of their sensor, but like Jochen, I can't find a supplier.

Simon
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Model Turbines 1 2 … 22 23
  Started by: Turbine Guy in: Stationary engines
- 28
- 572
- 19 November 2024 at 20:00
  Turbine Guy
- What did you do Today 2024 1 2 … 18 19
  Started by: JasonB in: The Tea Room
- 67
- 460
- 19 November 2024 at 20:00
  Dalboy
- Anybody recognise this design?
  Started by: Paul Kemp in: Stationary engines
- 9
- 16
- 19 November 2024 at 19:44
  Paul Kemp
- New Memeber in Norfolk, UK
  Started by: petetwissell in: Introduce Yourself – New members start here!
- 8
- 8
- 19 November 2024 at 18:50
  David Senior
- 30 Year old MOTORUN 3 Phase Static converter 1 2 3
  Started by: mr fixit in: Introduce Yourself – New members start here!
- 13
- 62
- 19 November 2024 at 18:48
  mr fixit
- Diesel Heaters
  Started by: Peter Simpson 3 in: General Questions
- 8
- 10
- 19 November 2024 at 18:47
  Bob
- Sanding Belts for 4×36 Machine
  Started by: William Chitham in: Workshop Tools and Tooling
- 4
- 4
- 19 November 2024 at 17:46
  KenL
- 100g +/- 0.1 mg metrology weight standard?
  Started by: Ian P in: Workshop Tools and Tooling
- 5
- 8
- 19 November 2024 at 17:38
  old mart
- Using relays 1 2
  Started by: Graham Titman in: General Questions
- 11
- 27
- 19 November 2024 at 17:24
  Graham Titman
- Tom Senior Vertical Mill Y axis stuck
  Started by: tgglass in: Beginners questions
- 9
- 12
- 19 November 2024 at 16:58
  old mart
- Fuel tap
  Started by: Dalboy in: General Questions
- 3
- 4
- 19 November 2024 at 16:54
  old mart
- Which motor ?
  Started by: here again in: Manual machine tools
- 8
- 23
- 19 November 2024 at 16:48
  Michael Gilligan
- ML10 questions
  Started by: 1957jmh in: Beginners questions
- 10
- 10
- 19 November 2024 at 14:36
  Roderick Jenkins
- chenery 9 cylinder gnome
  Started by: charlie9cyl in: I/C Engines
- 5
- 5
- 19 November 2024 at 13:43
  Andy Stopford
- opposed twin engine calculations
  Started by: bricky in: I/C Engines
- 10
- 15
- 19 November 2024 at 12:47
  petetwissell
- Restoration of a Watchmaker’s Drill Press
  Started by: Michael Gilligan in: Suggested Online Resources
- 2
- 2
- 19 November 2024 at 09:49
  Harry Wilkes
- Jakobs Gear Hobber from scrap (no casting)
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 19 November 2024 at 08:52
  David George 1
- boiler leak
  Started by: Bill Dawes in: Locomotives
- 10
- 18
- 18 November 2024 at 23:23
  Bill Dawes
- DIY Homemade Lamp Running off PM Research Model Generator
  Started by: Blue Heeler in: Stationary engines
- 2
- 3
- 18 November 2024 at 22:21
  Blue Heeler
- MEW 346 creates new definition of ‘universal’,
  Started by: Ian P in: Model Engineers’ Workshop.
- 1
- 1
- 18 November 2024 at 21:38
  Ian P
- New Here
  Started by: garryh in: Introduce Yourself – New members start here!
- 6
- 14
- 18 November 2024 at 19:49
  garryh
- Tap alignment in the mill and lathe? 1 2 3
  Started by: Bo’sun in: Workshop Tools and Tooling
- 21
- 52
- 18 November 2024 at 19:42
  bernard towers
- Wellsaw 4″ Hacksaw Info
  Started by: John McCulla in: Manual machine tools
- 7
- 13
- 18 November 2024 at 19:17
  Pete Rimmer
- Ultracut 370 alternatives
  Started by: Mick Bailey in: Materials
- 5
- 6
- 18 November 2024 at 17:53
  mark costello 1
- Parvalux motor – help please
  Started by: Mike Waldron in: Manual machine tools
- 13
- 22
- 18 November 2024 at 17:47
  Michael Gilligan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4755

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies