Back Issue MEW Wanted

Back Issue MEW Wanted

This topic has 7 replies, 6 voices, and was last updated 14 December 2011 at 21:50 by John Coates.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
11 December 2011 at 05:03 #79683
James A Lee
Participant
@jamesalee41024
Gentlemen;

I currently need a copy of MEW, Issue No. 50. Condition not a problem, as long as reasonably intact and legible.

Thank you,

James, California USA
Advert

11 December 2011 at 05:03 #38089
James A Lee
Participant
@jamesalee41024
11 December 2011 at 14:51 #79702
wheeltapper
Participant
@wheeltapper
Hi

have you tried eBay?

I got a lot from there to fill in the gaps in my collection.

Roy
11 December 2011 at 16:34 #79705
Richard Parsons
Participant
@richardparsons61721
James

The copy you want is in the MEW Online Archive (if you have a subscription)

DAVID There is an ‘error on page’ in Issue No 50. I suggest next time you visit the place where these scans are prepared and loaded, you take two house bricks with you and remind those who do the work about “camels”
rdgs

Dick
11 December 2011 at 20:45 #79726
Sub Mandrel
Participant
@submandrel
That’s be the seven day ones, will it?

Neil
14 December 2011 at 21:38 #79850
Tony Pratt 1
Participant
@tonypratt1
James, did you get a copy?

Tony
14 December 2011 at 21:48 #79851
John Coates
Participant
@johncoates48577
This guy has one for £4.50

MEW on ebay
14 December 2011 at 21:50 #79852
John Coates
Participant
@johncoates48577
And another one, same price

Another ebay MEW
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Diesel Heaters
  Started by: Peter Simpson 3 in: General Questions
- 6
- 6
- 19 November 2024 at 14:24
  not done it yet
- Which motor ?
  Started by: here again in: Manual machine tools
- 8
- 19
- 19 November 2024 at 14:10
  Brian Selby
- chenery 9 cylinder gnome
  Started by: charlie9cyl in: I/C Engines
- 5
- 5
- 19 November 2024 at 13:43
  Andy Stopford
- opposed twin engine calculations
  Started by: bricky in: I/C Engines
- 10
- 15
- 19 November 2024 at 12:47
  petetwissell
- ML10 questions
  Started by: 1957jmh in: Beginners questions
- 9
- 9
- 19 November 2024 at 12:43
  Howard Lewis
- Fuel tap
  Started by: Dalboy in: General Questions
- 2
- 3
- 19 November 2024 at 12:34
  Dalboy
- New Memeber in Norfolk, UK
  Started by: petetwissell in: Introduce Yourself – New members start here!
- 5
- 5
- 19 November 2024 at 12:20
  Brian Baker 2
- Using relays 1 2
  Started by: Graham Titman in: General Questions
- 11
- 26
- 19 November 2024 at 12:15
  Howard Lewis
- 100g +/- 0.1 mg metrology weight standard?
  Started by: Ian P in: Workshop Tools and Tooling
- 4
- 7
- 19 November 2024 at 09:53
  Michael Gilligan
- Restoration of a Watchmaker’s Drill Press
  Started by: Michael Gilligan in: Suggested Online Resources
- 2
- 2
- 19 November 2024 at 09:49
  Harry Wilkes
- Jakobs Gear Hobber from scrap (no casting)
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 19 November 2024 at 08:52
  David George 1
- boiler leak
  Started by: Bill Dawes in: Locomotives
- 10
- 18
- 18 November 2024 at 23:23
  Bill Dawes
- 30 Year old MOTORUN 3 Phase Static converter 1 2 3
  Started by: mr fixit in: Introduce Yourself – New members start here!
- 13
- 61
- 18 November 2024 at 22:59
  mr fixit
- DIY Homemade Lamp Running off PM Research Model Generator
  Started by: Blue Heeler in: Stationary engines
- 2
- 3
- 18 November 2024 at 22:21
  Blue Heeler
- MEW 346 creates new definition of ‘universal’,
  Started by: Ian P in: Model Engineers’ Workshop.
- 1
- 1
- 18 November 2024 at 21:38
  Ian P
- What did you do Today 2024 1 2 … 18 19
  Started by: JasonB in: The Tea Room
- 67
- 455
- 18 November 2024 at 20:11
  Nicholas Farr
- New Here
  Started by: garryh in: Introduce Yourself – New members start here!
- 6
- 14
- 18 November 2024 at 19:49
  garryh
- Tap alignment in the mill and lathe? 1 2 3
  Started by: Bo’sun in: Workshop Tools and Tooling
- 21
- 52
- 18 November 2024 at 19:42
  bernard towers
- Wellsaw 4″ Hacksaw Info
  Started by: John McCulla in: Manual machine tools
- 7
- 13
- 18 November 2024 at 19:17
  Pete Rimmer
- Ultracut 370 alternatives
  Started by: Mick Bailey in: Materials
- 5
- 6
- 18 November 2024 at 17:53
  mark costello 1
- Anybody recognise this design?
  Started by: Paul Kemp in: Stationary engines
- 9
- 15
- 18 November 2024 at 17:53
  John Purdy
- Parvalux motor – help please
  Started by: Mike Waldron in: Manual machine tools
- 13
- 22
- 18 November 2024 at 17:47
  Michael Gilligan
- Hot rolled angle problems 1 2
  Started by: Mick Bailey in: Materials
- 17
- 42
- 18 November 2024 at 14:44
  duncan webster 1
- Interesting Chuck design
  Started by: Vic in: Workshop Tools and Tooling
- 9
- 19
- 18 November 2024 at 13:34
  Vic
- Traction Engine Identification Help Please….
  Started by: Bill Morgan in: Traction engines
- 6
- 6
- 18 November 2024 at 09:19
  noel shelley

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4755

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies