Adverts

Adverts

This topic has 4 replies, 3 voices, and was last updated 24 November 2011 at 22:16 by Sub Mandrel.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
24 November 2011 at 18:18 #78495
michael cole
Participant
@michaelcole91146
I have allways been inpressed with the Arc Eurotrade adverts in the magazines.Lots of information about the products. Very good this month with the thread lock stuff almost as good as some as the articles.

Mike

I have nothing to do with Arc Eurotrade, being only a very very small customer.
Advert

24 November 2011 at 18:18 #38087
michael cole
Participant
@michaelcole91146
Good adverts in MEW
24 November 2011 at 20:22 #78511
Sub Mandrel
Participant
@submandrel
> being only a very very small customer.

Have you tried pig muck in the wellies?

Seriously, I re-read the Arc catalogue recently. Ketan’s frankness is quite disarming and a contrast to some.

Neil
24 November 2011 at 21:03 #78512
John Stevenson 1
Participant
@johnstevenson1
Posted by Stub Mandrel on 24/11/2011 20:22:41:

Seriously, I re-read the Arc catalogue recently. Ketan’s frankness is quite disarming and a contrast to some.

Neil

I wonder if it has anything to do with being a vegetarian ? Mind you he is a quid better off than the rest of us………………..

John S.
24 November 2011 at 22:16 #78519
Sub Mandrel
Participant
@submandrel
I’m a veggie too.. just spent enough of my wages to pay for a new motor on quorn & soya at Tesco.com

Neil
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- New Memeber in Norfolk, UK
  Started by: petetwissell in: Introduce Yourself – New members start here!
- 5
- 5
- 19 November 2024 at 12:20
  Brian Baker 2
- chenery 9 cylinder gnome
  Started by: charlie9cyl in: I/C Engines
- 3
- 3
- 19 November 2024 at 12:18
  Dave Halford
- Using relays 1 2
  Started by: Graham Titman in: General Questions
- 11
- 26
- 19 November 2024 at 12:15
  Howard Lewis
- Fuel tap
  Started by: Dalboy in: General Questions
- 2
- 2
- 19 November 2024 at 12:12
  JasonB
- Which motor ?
  Started by: here again in: Manual machine tools
- 6
- 16
- 19 November 2024 at 11:52
  Bazyle
- Diesel Heaters
  Started by: Peter Simpson 3 in: General Questions
- 5
- 5
- 19 November 2024 at 11:35
  noel shelley
- ML10 questions
  Started by: 1957jmh in: Beginners questions
- 8
- 8
- 19 November 2024 at 11:05
  Bazyle
- 100g +/- 0.1 mg metrology weight standard?
  Started by: Ian P in: Workshop Tools and Tooling
- 4
- 7
- 19 November 2024 at 09:53
  Michael Gilligan
- Restoration of a Watchmaker’s Drill Press
  Started by: Michael Gilligan in: Suggested Online Resources
- 2
- 2
- 19 November 2024 at 09:49
  Harry Wilkes
- Jakobs Gear Hobber from scrap (no casting)
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 19 November 2024 at 08:52
  David George 1
- boiler leak
  Started by: Bill Dawes in: Locomotives
- 10
- 18
- 18 November 2024 at 23:23
  Bill Dawes
- 30 Year old MOTORUN 3 Phase Static converter 1 2 3
  Started by: mr fixit in: Introduce Yourself – New members start here!
- 13
- 61
- 18 November 2024 at 22:59
  mr fixit
- DIY Homemade Lamp Running off PM Research Model Generator
  Started by: Blue Heeler in: Stationary engines
- 2
- 3
- 18 November 2024 at 22:21
  Blue Heeler
- MEW 346 creates new definition of ‘universal’,
  Started by: Ian P in: Model Engineers’ Workshop.
- 1
- 1
- 18 November 2024 at 21:38
  Ian P
- What did you do Today 2024 1 2 … 18 19
  Started by: JasonB in: The Tea Room
- 67
- 455
- 18 November 2024 at 20:11
  Nicholas Farr
- New Here
  Started by: garryh in: Introduce Yourself – New members start here!
- 6
- 14
- 18 November 2024 at 19:49
  garryh
- Tap alignment in the mill and lathe? 1 2 3
  Started by: Bo’sun in: Workshop Tools and Tooling
- 21
- 52
- 18 November 2024 at 19:42
  bernard towers
- Wellsaw 4″ Hacksaw Info
  Started by: John McCulla in: Manual machine tools
- 7
- 13
- 18 November 2024 at 19:17
  Pete Rimmer
- Ultracut 370 alternatives
  Started by: Mick Bailey in: Materials
- 5
- 6
- 18 November 2024 at 17:53
  mark costello 1
- Anybody recognise this design?
  Started by: Paul Kemp in: Stationary engines
- 9
- 15
- 18 November 2024 at 17:53
  John Purdy
- Parvalux motor – help please
  Started by: Mike Waldron in: Manual machine tools
- 13
- 22
- 18 November 2024 at 17:47
  Michael Gilligan
- Hot rolled angle problems 1 2
  Started by: Mick Bailey in: Materials
- 17
- 42
- 18 November 2024 at 14:44
  duncan webster 1
- Interesting Chuck design
  Started by: Vic in: Workshop Tools and Tooling
- 9
- 19
- 18 November 2024 at 13:34
  Vic
- Traction Engine Identification Help Please….
  Started by: Bill Morgan in: Traction engines
- 6
- 6
- 18 November 2024 at 09:19
  noel shelley
- Model Turbines 1 2 … 22 23
  Started by: Turbine Guy in: Stationary engines
- 28
- 571
- 17 November 2024 at 23:02
  duncan webster 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4755

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies