wm180 fault

wm180 fault

This topic has 2 replies, 2 voices, and was last updated 14 May 2011 at 21:01 by Vic.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
4 February 2011 at 12:14 #63546
Steve Casey
Participant
@stevecasey19587
I have a WM180 lathe and I’m looking for some advice on fault finding. I recently blew the PCB (B35379) and have had a new one sent and fitted it but since then whenever I start it up the speed controller reads 6054, the chuck spins about three times and then dies . I believe i have set all components correctly, can anyone shed any light? or where I can find some info as I can not find anything over internet and have no destruction manual. Most appriciated
Advert

4 February 2011 at 12:14 #38028
Steve Casey
Participant
@stevecasey19587
14 May 2011 at 21:01 #68471
Vic
Participant
@vic
Have you tried contacting Warco?: http://www.warco.co.uk/contactus.aspx
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- chenery 9 cylinder gnome
  Started by: charlie9cyl in: I/C Engines
- 2
- 2
- 19 November 2024 at 10:39
  Michael Gilligan
- ML10 questions
  Started by: 1957jmh in: Beginners questions
- 6
- 6
- 19 November 2024 at 10:16
  SillyOldDuffer
- 100g +/- 0.1 mg metrology weight standard?
  Started by: Ian P in: Workshop Tools and Tooling
- 4
- 7
- 19 November 2024 at 09:53
  Michael Gilligan
- Restoration of a Watchmaker’s Drill Press
  Started by: Michael Gilligan in: Suggested Online Resources
- 2
- 2
- 19 November 2024 at 09:49
  Harry Wilkes
- Diesel Heaters
  Started by: Peter Simpson 3 in: General Questions
- 2
- 2
- 19 November 2024 at 09:47
  Harry Wilkes
- Which motor ?
  Started by: here again in: Manual machine tools
- 6
- 11
- 19 November 2024 at 09:32
  Martin of Wick
- Using relays
  Started by: Graham Titman in: General Questions
- 10
- 24
- 19 November 2024 at 09:28
  SillyOldDuffer
- Jakobs Gear Hobber from scrap (no casting)
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 19 November 2024 at 08:52
  David George 1
- boiler leak
  Started by: Bill Dawes in: Locomotives
- 10
- 18
- 18 November 2024 at 23:23
  Bill Dawes
- 30 Year old MOTORUN 3 Phase Static converter 1 2 3
  Started by: mr fixit in: Introduce Yourself – New members start here!
- 13
- 61
- 18 November 2024 at 22:59
  mr fixit
- DIY Homemade Lamp Running off PM Research Model Generator
  Started by: Blue Heeler in: Stationary engines
- 2
- 3
- 18 November 2024 at 22:21
  Blue Heeler
- MEW 346 creates new definition of ‘universal’,
  Started by: Ian P in: Model Engineers’ Workshop.
- 1
- 1
- 18 November 2024 at 21:38
  Ian P
- What did you do Today 2024 1 2 … 18 19
  Started by: JasonB in: The Tea Room
- 67
- 455
- 18 November 2024 at 20:11
  Nicholas Farr
- New Here
  Started by: garryh in: Introduce Yourself – New members start here!
- 6
- 14
- 18 November 2024 at 19:49
  garryh
- Tap alignment in the mill and lathe? 1 2 3
  Started by: Bo’sun in: Workshop Tools and Tooling
- 21
- 52
- 18 November 2024 at 19:42
  bernard towers
- Wellsaw 4″ Hacksaw Info
  Started by: John McCulla in: Manual machine tools
- 7
- 13
- 18 November 2024 at 19:17
  Pete Rimmer
- Ultracut 370 alternatives
  Started by: Mick Bailey in: Materials
- 5
- 6
- 18 November 2024 at 17:53
  mark costello 1
- Anybody recognise this design?
  Started by: Paul Kemp in: Stationary engines
- 9
- 15
- 18 November 2024 at 17:53
  John Purdy
- Parvalux motor – help please
  Started by: Mike Waldron in: Manual machine tools
- 13
- 22
- 18 November 2024 at 17:47
  Michael Gilligan
- Hot rolled angle problems 1 2
  Started by: Mick Bailey in: Materials
- 17
- 42
- 18 November 2024 at 14:44
  duncan webster 1
- Interesting Chuck design
  Started by: Vic in: Workshop Tools and Tooling
- 9
- 19
- 18 November 2024 at 13:34
  Vic
- Traction Engine Identification Help Please….
  Started by: Bill Morgan in: Traction engines
- 6
- 6
- 18 November 2024 at 09:19
  noel shelley
- Model Turbines 1 2 … 22 23
  Started by: Turbine Guy in: Stationary engines
- 28
- 571
- 17 November 2024 at 23:02
  duncan webster 1
- Hardy & Padmore “Ideal”
  Started by: JasonB in: I/C Engines
- 4
- 7
- 17 November 2024 at 20:29
  JasonB
- Spring material advice needed
  Started by: old mart in: Materials
- 10
- 16
- 17 November 2024 at 19:33
  old mart

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4755

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies