This thread is aimed at UK. members.

Here are a couple of pictures of our sheet steel shed:

and

Sorry about neighbours' washing! I emphasise that this is not my workshop. It is for general domestic and garden storage, different but still useful.

This shed was given to me by a friend, it was originally purchased by his parents, long since deceased.  No manufacturers' description of assembly instructions are available.  The photos date from the time, several years ago, when the shed was reassembled after arrival at its current site.

I'm sorry that these photos do not show the doors in any detail. There are two doors, each suspended from an overhead track by two plastic sliding hangers. The foot of each door is trapped/guided in a channel formed in the steel foundation strip.

The problem which prompts this post is that one hanger of each door has broken due to deterioration of the plastic. I know it is a bit of a long-shot but does any member recognise the shed from the photos? In particular, please can anyone advise whether replacement hangers are available as spare parts and, if so, from whom/where?

In anticipation of the inevitable question: I am currently not able to make replacement hangers in my own workshop (closed for radical rearrangements!!).

Best regards,

Swarf, Mostly!

Edited By Swarf, Mostly! on 06/04/2023 17:42:00

Edited By Swarf, Mostly! on 06/04/2023 17:44:22

Edited By Swarf, Mostly! on 06/04/2023 17:45:41