Hi

their pliers are wonderful, various sizes, plane (Plain?) or Ribbed inside jaw etc.

Use the Hole punch (If you have one) to make a hole in the fabric.

Put the peg of the Press stud back through hole,

turn fabric over,

put other part of press stud over peg.

Put back on Anvil

Use punch to spread peg.

EDIT,

I just realized you dont have any press studs, and They are the sort used on Belstaff motorcycle jackets

George

Edited By george baker 1 on 08/03/2023 22:37:15

This Newey tool has a very similar pair of punches and a reversible die. You'll need the correct kit of parts to use it.

I have a plier type hole punch with a rotating head and a yard long straight edge both made by Maun

HTH,

Rod

Hi, I have a small Press Fasteners set, which is used in the same way as shown in the instructions that Rod has posted.

I also have a small Eyelet plier set, which the Eyelets have about a 4.4mm hole, which are really self explanatory to use.

Lastly I have a large Eyelet set with 7/16" holes, and is shown here with their instructions of how to fit them.

They all work very well, even though they were not very expensive.

Regards Nick.

Edited By Nicholas Farr on 09/03/2023 08:45:50

Cousins uk Horological suppliers have a very wide range of pliers etc including Maun.