New useful tool hole cutting

Advert

New Replies

Report Bug

Help/FAQs

New useful tool hole cutting

This topic has 10 replies, 6 voices, and was last updated 8 April 2016 at 16:50 by Martin W.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
7 April 2016 at 17:02 #233671
Ian Parkin
Participant
@ianparkin39383
this is the item number :221766558666

i saw this on eBay and at £50 it seemed a steal if it was any good

Postage within the uk was included it weighs 12kg so that must be costly by Royal Mail…anyway it arrived today and it's brill…there's lots of uses for the pump and ram and also using it for its intended use of punching holes in 3mm thick steel I'm sure I will use it lots

Edited By Ian Parkin on 07/04/2016 17:05:32
Advert

7 April 2016 at 17:02 #34654
Ian Parkin
Participant
@ianparkin39383
7 April 2016 at 22:44 #233729
Colin Heseltine
Participant
@colinheseltine48622
Ian,

Quick question for you. Looking at the advert it says that 1/2" die and punch set gives actual hole size of .885", 3/4" gives hole of 1.115" up to 2" giving hole of 2.416".

Is this correct. Seams a bit odd to me.

Colin
8 April 2016 at 00:45 #233736
Peter Krogh
Participant
@peterkrogh76576
Those sizes indicate that the punches are for use in the electrical trade, for creating hole for conduit fittings which are based upon pipe sizes.

Pete
8 April 2016 at 10:44 #233773
Ian Parkin
Participant
@ianparkin39383
Yes the sizes are marked strangley but if you just select the size that you want rather than the marked size

I'm sure they are designed for electrical panel work

dies are easy enough to make if theres not the size you want

I bought from a local supplier a 6 ft length of hose with fittings last week for my floor press and that was £70

this machine complete for £40 seems crazy ( plus post)
8 April 2016 at 11:38 #233781
Martin W
Participant
@martinw
Interesting but although seller is registered as a 'Business Seller' they give no company/contact address plus the item location is given as 'Oldham, Greater Manchester, UK' however the seller is actually registered in the 'United States'.

If there is a problem it may make returns or tracking someone down somewhat difficult.
8 April 2016 at 13:59 #233798
Ian Parkin
Participant
@ianparkin39383
and fairly dreadfull feedback

but it did arrive very quickly 3 days

theres a spare seal kit with it and i've done 30 holes testing it on various materials and it works great
8 April 2016 at 14:11 #233799
ega
Participant
@ega
From looking at one or two You Tube videos it seems clear that a pilot hole is required as with the Q-Max style of punch. From this point of view, the main advantage seems to be more and easier punching power. Have you actually tried 3mm steel?

Do tell us some of the other uses you have in mind.
8 April 2016 at 14:24 #233800
Ian Parkin
Participant
@ianparkin39383
It is exactly like a q-max cutter

the ram had a large body and large thread that can be repurposed as a bearing puller or anywhere else you may need 10tons of force albeit only over 20mm stroke

I have tried it on 2.5mm stainless 5 mm alloy so far 1mm steel it hardly stops at even at the large size 60mm or so
8 April 2016 at 14:53 #233802
John Stevenson 1
Participant
@johnstevenson1
Only one feedback on the punch though and that wasn't coherant

"Warning seller no god "

Well of course he isn't, there is only one God, there was two before Myford's finished

Anyway ordered one at £50 you can't go wrong and can always use it as a power pack on the puller kit.
8 April 2016 at 16:50 #233809
Martin W
Participant
@martinw
Ian

Sounds OK then which is really what matters with these things. Using it as a puller could prove useful for bearings and with a suitable mandrel one could also use it to seat bearings etc. I expect.

Good luck
Author

Posts