Coloured lamps

Advert

New Replies

Report Bug

Help/FAQs

Coloured lamps

This topic has 13 replies, 10 voices, and was last updated 17 September 2015 at 23:23 by V8Eng.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
12 September 2015 at 14:07 #204027
KWIL
Participant
@kwil
I have a need for 25 watt 240 Volt SES (E14) based PYGMY fireglow lamps and have been unable to source same so I am contemplating dipping my own. Just need the right lacquer. Anyone help?

Edited By KWIL on 12/09/2015 14:08:18
Advert

12 September 2015 at 14:07 #32570
KWIL
Participant
@kwil
Fireglow lacquer source/formula
12 September 2015 at 14:30 #204030
michael howarth 1
Participant
@michaelhowarth1
You might like to try transparent ceramic lacquer which is usually available in decent artist supply shops. The lacquer is baked on to the ceramic item so is definitely heat resistant.

Mick
12 September 2015 at 14:32 #204031
Keith Long
Participant
@keithlong89920
Hi Kwil – Conrad electrical do bulb paint – here – rather pricey though for doing a couple of bulbs. Your better bet might be to change the lamp holders if possible as it looks as though you can get 25W pygmy and golf ball in red but with a bayonet cap fitting. If you can't change the holders have you got room to put some stage lantern gel material in place so that ordinary clear bulbs could be used?
12 September 2015 at 14:45 #204033
Brian Wood
Participant
@brianwood45127
Hello KWIL

http://www.propertyrepairsystems.co.uk

They sell heat resisting paint to well above light bulb temperatures in aerosol cans as well as tins, they might be worth looking at

Brian
12 September 2015 at 15:00 #204034
KWIL
Participant
@kwil
Thanks everyone, that should start me off!
12 September 2015 at 15:04 #204036
davidsuffolk
Participant
@davidsuffolk
You didn't say what colour you want but assuming red for a fireglow they make plenty of LED E14 bulbs like this one?

http://www.bltdirect.com/minisun-led-golfball-ses-4w-red-40-watt-alternative (says 40w but the bulb is MiniSun LED Golfball SES 4W Red (20 Watt Alternative).

May be too tall as compared to a pygmy bulb but there are others that may be small enough?

Edited By davidsuffolk on 12/09/2015 15:07:10

Edited By davidsuffolk on 12/09/2015 15:07:32
13 September 2015 at 13:37 #204130
Ian Parkin
Participant
@ianparkin39383
David

My mum had an electric fire with the fireglow bulbs in it constantly blowing

I thought get her some leds..end of problem

Only trouble is the bulbs act like heaters to make the flicker effect with the spinners so leds no use if you have flicker effect too
13 September 2015 at 14:47 #204140
Clive India
Participant
@cliveindia
Is this suitable?

http://www.ebay.co.uk/itm/15w-Coloured-Pygmy-Bulb-Lamp-BC-Bayonet-Cap-Push-In-B22-Packs-of-2-5-or-10-New-/331604998391?var=&hash=item4d3532b8f7

Edited By Clive India on 13/09/2015 14:49:25
13 September 2015 at 18:32 #204160
John Baguley
Participant
@johnbaguley78655
These seem to stock the bulbs you want? Unless you've tried them and they are out of stock

**LINK**

John
13 September 2015 at 19:03 #204163
KWIL
Participant
@kwil
John,

At £8 for a single lamp (delivered)!

They do not last that long so cheaper bulbs + expensive lacquer is probably cheaper in the long (or indeed ) short run.

Clive,

That is better but they are BC base, it might be that I can change the lamp sockets over to BC from SES.

Thank you
13 September 2015 at 19:33 #204166
John Baguley
Participant
@johnbaguley78655
Yea, not exactly cheap. If they are that hard to source now they can probably charge what they like for them

John
17 September 2015 at 22:46 #204741
Packmule
Participant
@packmule
Our gas fire uses pygmy ses fire glow bulbs .Fire is made by Gloworm.

Based in Belper I think.

Spare Parts 01773 596090

Don't know price

Bob
17 September 2015 at 23:23 #204743
V8Eng
Participant
@v8eng
Have you tried Ebay?
Author

Posts