Keeping Nozzles Clean

Advert

New Replies

Report Bug

Help/FAQs

Keeping Nozzles Clean

This topic has 10 replies, 9 voices, and was last updated 8 June 2020 at 15:33 by Steve Skelton 1.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
8 June 2020 at 10:24 #478379
Neil Wyatt
Moderator
@neilwyatt
I thought I would share this simple idea. I regularly get a messy nozzle, because sometimes extrusion when the hot end is at rest curls around, this then becomes a blob when priming the nozzle. The nozzle can also pick up loose bits such as priming material dragged on to the hot bed. This material can end up as 'zits' glued to a print.

I have a small square of cellulose foam (the sort used in soldering iron tip cleaners) and use this to wipe the hot nozzle. It lasts for ages as the cooled PLA generally peels off and it avoids the risk of burnt fingertips if you try to pluck off a blob of PLA.

Neil
Advert

8 June 2020 at 10:24 #31644
Neil Wyatt
Moderator
@neilwyatt
A micro-tip…
8 June 2020 at 11:19 #478384
Kiwi Bloke
Participant
@kiwibloke62605
Is it just me, or have others started to read Neil's posting and wondered whether they were accidentally on a medical forum?

Time for me to go to bed, I think…
8 June 2020 at 12:26 #478402
Brian Oldford
Participant
@brianoldford70365
Out of context, you could be forgiven for coming up with all sorts of connotations.
8 June 2020 at 12:51 #478417
Bazyle
Participant
@bazyle
Do you use the foam wet like for soldering irons, or is there a new type of foam for this I haven't caught up with yet?

Perhaps you could edit the title to put '3D printer' at the front.
8 June 2020 at 13:42 #478436
old mart
Participant
@oldmart
I was also confused at first, and ended up checking the "all topics", and 3D printers was at the top of the list.
8 June 2020 at 14:02 #478440
Dave Halford
Participant
@davehalford22513
We used to get the odd messy nozzle before Covid. You really miss your grandkids.

Not old enough for zits yet.

Edited By Dave Halford on 08/06/2020 14:03:37
8 June 2020 at 14:22 #478449
Enough!
Participant
@enough
I've always use a small (real) brass wire brush for nozzle cleaning. It was recommended on my original (long gone unfortunately) DaVinci printer and I've done it that way ever since.
8 June 2020 at 15:17 #478460
Robin
Participant
@robin
I have lots of that cellulose foam, no more burnt fingers for me.

I have a 3D printed tray to hold one of the larger cut pieces under my iron.

After wrecking one nozzle pulling the string off at the last moment with tweezers, I bought brass tweezers that can do no damage.

Edited By Robin on 08/06/2020 15:17:51
8 June 2020 at 15:19 #478461
Steve Skelton 1
Participant
@steveskelton1
I tend to use cardboard scraps just prior to printing to clean the nozzle surface. What I tend to do is to wind back the filament after each run so during preheat there is none hanging about in the nozzle.

Another thing is I use purge filament regularly (about 20mm of filament) to clean out the nozzle as it is highly stabilised and pushes out any partly decomposed filament.

I tend to only use ABS filaments as PLA, I am lead to believe, will degrade in damp environments over a period of time.

Steve
8 June 2020 at 15:33 #478465
Steve Skelton 1
Participant
@steveskelton1
Neil, have had a look to find the cellulose pads but can't find them. Where do you source yours from? I tend to use wet kitchen roll pads for soldering irons.

Steve
Author

Posts