Stationary engine project for completion

Stationary engine project for completion

This topic has 1 reply, 1 voice, and was last updated 21 September 2012 at 12:54 by Jonathan Taylor 2.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
21 September 2012 at 12:54 #98979
Jonathan Taylor 2
Participant
@jonathantaylor2
My father has a partially built model stationary engine and boiler that he started building with a friend probably more than a decade ago. He is getting older now and his vision is poor so he is unable to complete it. It has been passed amongst some of his friends who have each worked on it a bit, but unfortunately as they are getting older, either their vision has started to go, or they have passed away.

He is based near Retford in North Notts and is hoping that someone local would be interested in completing it. I don't know much about it, but if anyone is local and interested please drop me an personal message and I can put you in touch with him directly.

Regards, Jonathan
Advert

21 September 2012 at 12:54 #3145
Jonathan Taylor 2
Participant
@jonathantaylor2
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Unkown micrometer manufacturer 1 2
  Started by: Tomk in: Workshop Tools and Tooling
- 15
- 47
- 15 January 2025 at 12:57
  Michael Gilligan
- Tool height: Glanze parting tool in Myford S7
  Started by: gabrielb in: Workshop Tools and Tooling
- 11
- 14
- 15 January 2025 at 12:51
  bernard towers
- Refurbishing alloy wheels
  Started by: Mike Crossfield in: The Tea Room
- 9
- 10
- 15 January 2025 at 12:44
  Oldiron
- Flashing Multiple LEDs at the Same Time
  Started by: James Alford in: Electronics in the Workshop
- 5
- 11
- 15 January 2025 at 12:41
  James Alford
- Myford Super 7 questions
  Started by: davp1971 in: Help and Assistance! (Offered or Wanted)
- 4
- 8
- 15 January 2025 at 11:18
  JohnF
- Subscriptions – Going Forward 1 2 … 4 5
  Started by: JasonB in: Subscription issues and Digital magazines
- 36
- 117
- 15 January 2025 at 10:48
  SillyOldDuffer
- Had Another Go 1 2 … 6 7
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 19
- 164
- 15 January 2025 at 10:28
  David Jupp
- Harrogate 2025 ??
  Started by: Kevin Hunter in: Exhibitions, Shows and Club Events
- 6
- 6
- 15 January 2025 at 10:08
  Les Riley
- Mobile workshop
  Started by: Sonic Escape in: The Tea Room
- 10
- 16
- 15 January 2025 at 09:52
  bernard towers
- leaded mild steel.
  Started by: mark smith 20 in: Materials
- 5
- 7
- 15 January 2025 at 09:37
  JasonB
- Internal thread & taper in same hole
  Started by: Dell in: Workshop Techniques
- 10
- 24
- 14 January 2025 at 22:18
  Howard Lewis
- Coal 1 2
  Started by: Michael Callaghan in: General Questions
- 22
- 45
- 14 January 2025 at 22:13
  Howard Lewis
- New Member
  Started by: gabrielb in: Introduce Yourself – New members start here!
- 3
- 3
- 14 January 2025 at 21:53
  Howard Lewis
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 7
- 19
- 14 January 2025 at 17:46
  Harry Wilkes
- Fitting chucks to 7 x 12 type baby lathes
  Started by: old mart in: Manual machine tools
- 5
- 9
- 14 January 2025 at 16:40
  old mart
- Bronze round tube
  Started by: jefferybond in: Materials
- 4
- 4
- 14 January 2025 at 16:29
  old mart
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 9 10
  Started by: Neil Wyatt in: Model Engineer.
- 60
- 226
- 14 January 2025 at 15:46
  JasonB
- Weiss 290 Lathe Power Issue
  Started by: thisdesignedthat in: Manual machine tools
- 6
- 12
- 14 January 2025 at 15:05
  thisdesignedthat
- Reilang Oil Can washer?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 6
- 12
- 14 January 2025 at 14:15
  Chris Kaminski
- Francis W Shaw bench planer
  Started by: Rob Gough in: Manual machine tools
- 8
- 22
- 14 January 2025 at 14:08
  Rob Gough
- Editing an STL file
  Started by: Paul L in: CAD – Technical drawing & design
- 9
- 17
- 14 January 2025 at 12:36
  Another JohnS
- Powder coating
  Started by: John MC in: The Tea Room
- 8
- 9
- 14 January 2025 at 11:47
  Paul Mills 4
- Myford Super 7 clutch
  Started by: john fletcher 1 in: Help and Assistance! (Offered or Wanted)
- 8
- 11
- 14 January 2025 at 10:39
  john fletcher 1
- A rather old contributor
  Started by: Sam Stones in: The Tea Room
- 8
- 9
- 13 January 2025 at 22:11
  Sam Stones
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 328
- 13 January 2025 at 21:16
  Brian Abbott

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies