Advanced Grinding Rest

Advert

New Replies

Report Bug

Help/FAQs

Advanced Grinding Rest

This topic has 8 replies, 6 voices, and was last updated 8 April 2022 at 07:14 by John Templeman.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
6 April 2022 at 20:38 #593261
John Templeman
Participant
@johntempleman87735
Good Evening All,

I have just completed my first major project on the lathe and mill. I have built myself an Advanced Grinding Rest using the plans from Harold Halls book Milling A Complete Course. I have to say I really enjoyed the project and found some aspects of it really challenging. Now that it is built I am going to strip it down and cold blue some of the components and polish others. I also need to source some countersunk screws for the table as I currently don't have any the correct size. I have attached some photos of it currently and will add some more when I am happy with the final finish (sorry for the orientation of the pics)

Edited By SillyOldDuffer on 07/04/2022 08:39:39
Advert

6 April 2022 at 20:38 #31406
John Templeman
Participant
@johntempleman87735
6 April 2022 at 23:44 #593277
Calum
Participant
@calumgalleitch87969
What lovely looking work, John.

I think Harold later decided to use a couple of cheap magnetic bases in preference to screwing the rest down, as this lets you slide it into approximate position easily without having to set up all the adjustments.
7 April 2022 at 05:06 #593287
Thor 🇳🇴
Participant
@thor
Nice work John, the rest is very useful. Do you plan to make the holder for sharpening lathe tools or the end mill sharpener?

Thor

Edited By Thor 🇳🇴 on 07/04/2022 05:07:14
7 April 2022 at 09:14 #593302
David Noble
Participant
@davidnoble71990
Very nice John.

David
7 April 2022 at 10:58 #593331
ega
Participant
@ega
Thanks to whoever rotated the pictures which I would otherwise not have looked at.

Those magnetic bases do, of course, require something to stick to!
7 April 2022 at 11:37 #593347
DMB
Participant
@dmb
I have almost finished building mine, just got to complete the leadscrews. Busy finishing off the wooden baseboard to mount it and the grinder.

Quite a lot of work but seems worthwhile as it's an awful lot cheaper than the commercial alternatives. Cost of them would buy a hell of a lot of (sharp) new end mills……

Just need now, to experiment with vee block and clamp, rather than make Harold's end mill holder, which seems like anothe small marathon.

Got a decent looking white cup wheel fitted on grinder, so nearly ready to go with better shaped lathe tools to start with, then follow up with end mill and slotter grinding experiment.
7 April 2022 at 11:43 #593350
DMB
Participant
@dmb
John Templeman, looks like a well executed job. I obtained most of my screws from a handy local shop which does all kinds of fixings. "Nut & Bolt Store", Portland Road, Hove.

Another John!
8 April 2022 at 07:14 #593488
John Templeman
Participant
@johntempleman87735
Hi Guys many thanks for the comments and many thanks to S.O.D who kindly rotated the pics to the correct orientation. I intend to make the additional holders for the rest but I am currently resting on my laurels so to speak. I have ordered a large selection of bolts etc from a company called bolt world so waiting for those to arrive. In the meantime everything is going in the sonic bath ready for blueing etc.
Author

Posts